Attack of the Hana Modz Clone. Let's wait together!

Status
Not open for further replies.

MrPlink

Ultra Member
ECF Veteran
Mar 7, 2014
1,512
990
Portland, OR / San Francisco CA
Anyone have any suggestions for a good atty for flavor? Preferably with a decent sized drip well. I have an omega clone, vapor production is amazing but flavor leaves something to be desired. I also have a Gaia and a Black Nimbus on the way.

Get a dripper with a smaller chamber. Similar in size to a VA cyclone.
Wont ever be a fog machine, but they are flavor city compared to most larger 20+ mm drippers.
 

Frenz

Full Member
Feb 17, 2014
44
21
CA, USA
How's the fogger compare to the kfl?

I love my kfl. And it breaks my heart to say it, but I think the foggerv4 outperforms my kfl. I'm vaping my kf right now so by no means will I stop using it. But the dual coil is great on fogger. Glass tank is a huge plus. Once I found right amount of cotton in build i've had zero dry hits. on the chana mod it's chuckin' vapor, and the flavor is A+ even compared to the kfl. for 35$ shipped from ebay it was a great deal, I definitely recommend.
 

Fegbri

Super Member
ECF Veteran
Verified Member
Apr 1, 2014
315
294
Berlin, NJ
Also IMHO, I'd only consider it controversial if you had like Elmo, or another kids character on it, I know of a juice company that used the captain crunch guy, you can have crunch berry flavor but don't put a character associated with something marketed to kids on it with this whole fda thing in the works

Thanks! I do like it! Think it's really creative. Carried around a pack of smokes for so long, it will be kinda funny to carry this around. Plus my wife will freak out the firt time she sees it! Ha!:lol:
 

Fegbri

Super Member
ECF Veteran
Verified Member
Apr 1, 2014
315
294
Berlin, NJ
I love my kfl. And it breaks my heart to say it, but I think the foggerv4 outperforms my kfl. I'm vaping my kf right now so by no means will I stop using it. But the dual coil is great on fogger. Glass tank is a huge plus. Once I found right amount of cotton in build i've had zero dry hits. on the chana mod it's chuckin' vapor, and the flavor is A+ even compared to the kfl. for 35$ shipped from ebay it was a great deal, I definitely recommend.

I agree!! All I use anymore is my KFL+v2 and fogger 4.0+. Both give amazing flavor! Some of my liquids really came to life in them!

Going to try the magma for a dripper next. I have a Helios clone, it's nice, but not AMAZING.
 

joecil

Super Member
ECF Veteran
Verified Member
Jan 9, 2014
565
203
Russell Springs, Kentucky
I agree!! All I use anymore is my KFL+v2 and fogger 4.0+. Both give amazing flavor! Some of my liquids really came to life in them!

Going to try the magma for a dripper next. I have a Helios clone, it's nice, but not AMAZING.

I just got done ordering a Infanite Magna Clone from 101vape and a Brass Monkey from ebay to round out my dripper collection. Now will have 9 drippers, 5 kayfun lite + and 1 Aspire Nautilus. Now if my box mod clone will arrive I will have something to go with my Nemesis clones.
 

john333

Ultra Member
ECF Veteran
Verified Member
Mar 20, 2011
1,658
1,129
Indiana
I just got done ordering a Infanite Magna Clone from 101vape and a Brass Monkey from ebay to round out my dripper collection. Now will have 9 drippers, 5 kayfun lite + and 1 Aspire Nautilus. Now if my box mod clone will arrive I will have something to go with my Nemesis clones.

My Cartel Stillare RDA clone is pretty amazing. It sits on my TurtleShip V2 clone.
 

joecil

Super Member
ECF Veteran
Verified Member
Jan 9, 2014
565
203
Russell Springs, Kentucky
My Cartel Stillare RDA clone is pretty amazing. It sits on my TurtleShip V2 clone.

I like mine also as well as the 3 top TOBH, Gold Patriot, IGO-W w/ Halo cap, IGO-M, as well as my Omega in both gold and stainless finishes. They all work a bit differently however as of today I have the Brass Monkey and Magma on the way. That should about finish me off for awhile at least.
 

alee132

Senior Member
ECF Veteran
Verified Member
Mar 25, 2014
193
77
United States
Well just unboxed my cna30 from 101vape and im glad i only paid $70 for it. just ran it through the paces comparing it to my original hana v3 and cosmetically its spot on the 510 connector is even straighter. but thats where the similarities end. i have 6 attys 4 kayfuns and 2 rda's stillare clone @.5 and a original zenith v2 @.4ohms. the kayfuns are 1.1 and one of them is 1.2 on my hana i vape the kayfuns @ 12.7 watts the rda's @30watts. the cna30 at 12.7 watts only read one of the kayfuns the same ohms the other 3 were .1 lower all 4 of my kayfuns @ 12.7 watts vape regulated ohms not flashing and from 3.8 to 4 volts. none of them regulate on the cna30 ohm meter flashing on all 4. now on to the rda's the stillare on the hana dna30 @.5 30 watts is regulated ohm meter not flashing 4.1 volts. on the cna30 its unregulated @ 30 watts ohm meter flashing shows .5 ohms @3.8 volts now the zenith v2 @ 30 watts on the hana shows .4 ohms regulated not flashing @3.8 volts, on the cna30 @30 watts shows .4 ohms unregulated ohm meter flashing 3.3 volts. i was using sony vtc5 in both mods the one in the hana was about half charged cuz i was vaping that one all day. cna30 was using a freshly charged one. a little disappointed to say the least! again glad i only paid $70 for it. hope this helps. the vape seems the same on both so maybe its just inaccurate i dont know. kinda bummed.

it also changes watts setting by .1 down almost every time it wakes up, and some times takes 2 button pushes to fire. in my opinion this chip wasnt ready for market they rushed it due to hype.

IIRC it depends on what the level on your battery voltage is. So if your hana battery was lower, it would be at lower voltage. Which means it can regulate lower at that point in time. As the battery level drops, the lower it will regulate. So yes if the cna30 was higher battery level it would work that way, as it drains it should work the same way your dna was at half full. Now saying that, I think it should because I don't have one to test it but that's how they are supposed to work.
 
Last edited:

alee132

Senior Member
ECF Veteran
Verified Member
Mar 25, 2014
193
77
United States
It'd be nice if they at least added the option for buttons. Reverse polarity protection I could care less about honestly, I don't swap batteries enough to have this be an issue. And I'm not seeing the 350 going beyond the 35w... Buck circuit would be nice option to have though...

They finally confirmed the sx350 solder points for the up and down buttons, I can see them on my chip. They are set to release the firmware update to use these buttons in the next couple of weeks I hear but who know's how long it will be.
 

PapaGeno21

Super Member
ECF Veteran
Verified Member
Oct 12, 2013
927
1,041
RI
Just recived my clone - 1 week shipping to Norway from elev8.

Now where is the charge light, i have held it at different angeles but dont see any light.

They did not put a hole in the mod to see it. However if the room is almost pitch black you can see the red illumination of the LED inside the mod from behind the screen, and it goes green when fully charged. I was able to see mine very easily in the dark.

Going to check today what mine shuts down at as far as battery voltage for it to say its dead, and it stops charging at 4.19-4.20 so I am happy with that.
 

QuikWgn

Super Member
ECF Veteran
Verified Member
Dec 27, 2010
318
125
SnoCo Washington
www.youtube.com
I got a shipping confirmation from illvapes. Let my fun begin. I waited for 11 weeks with ssvapes and canceled. I've been waiting for this since February 12th

Sent from my HTC One_M8 using Tapatalk

I got mine last night as well at about 7pm. Jusdt waiting for USPS to update so I have a delivery date. From Cali to Seattle is usually 2 days max.
 

QuikWgn

Super Member
ECF Veteran
Verified Member
Dec 27, 2010
318
125
SnoCo Washington
www.youtube.com
HM3 <______> CNA30
1.94" <length> 1.860"
1.00" < width> 1.020"
3.43 <height> 3.525"

Hanna Modz V3 measurements from their web site, CNA 30 measurements from the ones I have in my possession

Good call then. I guess everyone has an out if they don't like their clone since they really aren't 1:1 as advertised then.
 

Crocky

Ultra Member
ECF Veteran
Verified Member
Mar 14, 2013
1,752
2,280
North Carolina
Anyone have any suggestions for a good atty for flavor? Preferably with a decent sized drip well. I have an omega clone, vapor production is amazing but flavor leaves something to be desired. I also have a Gaia and a Black Nimbus on the way.

Try the quasar. It has a reduced chamber although the drip well is pretty small, but heard it puts out great flavor because of the reduced chamber. I got one yesterday but have not tried it yet.
 

QuikWgn

Super Member
ECF Veteran
Verified Member
Dec 27, 2010
318
125
SnoCo Washington
www.youtube.com
Anyone have any suggestions for a good atty for flavor? Preferably with a decent sized drip well. I have an omega clone, vapor production is amazing but flavor leaves something to be desired. I also have a Gaia and a Black Nimbus on the way.

the Magma is where its at. Holds 40 drops and has a domed chamber. Best RDA flavor I have out of everything in my sig. The Origen would probably be a close second.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread