Attack of the Hana Modz Clone. Let's wait together!

[herb]

I just found this , dang, now i want to know where to get the clones that are slightly more expensive with the real chip :

I have been lucky enough to try various versions of the hana modz styled devices from different vendors from that well known Chinese market place for traders wanting large amounts.

(Edit) I was misinformed or lied to about the dna chip being authentic after using them its quite evident they are not authentic. But these units still perform better than the Cloupor ones that I have.

The latest ones that I received actually have the original dna 30 chip inside and were slightly more expensive than the Cloupor model.

 

[lsutiger]

Sorry,I've posted this before.
Just trying to help. I use this on the first clone with the big center post. Kind of like insurance before the accident.
Search results for: '510 to ego adapter with well'

Sent from my iPhone using Tapatalk

Bought this, thanks for the share.
Added bonus: Helps with the condensation that comes out of the airholes on my dripper not to drip into the well of the 510.

 

[Fergie]

I just found this , dang, now i want to know where to get the clones that are slightly more expensive with the real chip :

Where did you find this, I'm unaware any of the clones have Evolv DNA chips in them.

 

[herb]

Ya I know this. Really it's like comparing a moped to a hyabusa.

When building my last kayfun coil 1.2 ohm twisted 28g just screwing the deck on both the mvp set to the full 6 volts it would take a full 2 seconds to start glowing and it didn't even glow that bright. Put it on the clone and at 4.3 volts it glows almost instantly and way brighter.
Ill say it again the mvp does not give me what I want out of the coils I build it is a dog. 28g dual coils at 1.2 ohms were even worse.
Drop the $70 on one and I think you'll be shocked at the difference.

I think you missed the part where i said i DO NOT do twisted coils and builds that would make the DNA a wise choice , i am perfectly happy with micro single coils and cotton on the Kayfuns at 1 ohm and higher . If the MVP didn't work with those then i would of already bought a clone or mechanical.

If the DNA clones prove reliable (and thats a very big if) i will pick one up regardless because i love box mods.

 

[xtwosm0kesx]

I just found this , dang, now i want to know where to get the clones that are slightly more expensive with the real chip :

Where did you get this quote?

The only way i see this as accurate is if someone is buying enclosures and installing DNA's then selling them, i highly doubt a chinese company is buying Evolv chips and installing them in devices to resell.

 

[retird]

herb..... I'd be leary of the quote you posted.....clones are out there that say "Evolv DNA" on the display when you fire it but are not authentic DNA chipsets.... they came out at the same time as the clones that said "Hana Modz" in the display.....just saying...

Where did the quote come from that you posted... if you know....

 

[herb]

Fasttech , i am not aware of real DNA's either but if it's true i will be buying one sooner than i thought if the price is only slightly higher.

 

[herb]

herb..... I'd be leary of the quote you posted.....clones are out there that say "Evolv DNA" on the display when you fire it but are not authentic DNA chipsets.... they came out at the same time as the clones that said "Hana Modz" in the display.....just saying...

Where did the quote come from that you posted... if you know....

I didn't say the information was true , it's just information to be researched further.

 

[herb]

Bought this, thanks for the share.
Added bonus: Helps with the condensation that comes out of the airholes on my dripper not to drip into the well of the 510.

I heard those are very good quality .

 

[herb]

On reliability I can only attest to the 8 DNA's I have used in mods....none failed and one dna20 is almost 1.5 years in use now....and the Darwin is still functioning great after 3 years...

none of the real dna's do this....

Yep I missed out last go around and had to snag a couple today....they sell out quickly.....glad ya got a few...

Now thats what i like to hear , thats good enough for me but your talking real DNA's , a 1:1 clone should be similar in reliability and if it's not where is the problem.

I didn't think real DNA's would have the screen light up for no apparent reason , that would bother me but not some others.

 

[xtwosm0kesx]

Fasttech , i am not aware of real DNA's either but if it's true i will be buying one sooner than i thought if the price is only slightly higher.

Ahh i'd really take anything on there with a grain of salt, while there are a few useful posters on those forums the vast majority are definitely not the sharpest knives in the drawer.

Wouldn't be surprised if they were referencing the DNA 30 chips that FT is selling that apparently have 'Evolv DNA' (or similar)on boot-up, which are definitely not authentic Evolv chips.

 

[Fergie]

Bought this, thanks for the share.
Added bonus: Helps with the condensation that comes out of the airholes on my dripper not to drip into the well of the 510.

I had one of these kicking around and it's a workaround for the recessed atty center post.

Smoktech 510 Tank Airflow Controller

 

[retird]

Fasttech , i am not aware of real DNA's either but if it's true i will be buying one sooner than i thought if the price is only slightly higher.

I didn't say the information was true , it's just information to be researched further.

THX .... never thought you implied it to be true.... just wanted to know where the quote came from so a bit of research could be done on my end...

 

[herb]

Ahh i'd really take anything on there with a grain of salt, while there are a few useful posters on those forums the vast majority are definitely not the sharpest knives in the drawer.

Wouldn't be surprised if they were referencing the DNA 30 chips that FT is selling that apparently have 'Evolv DNA' (or similar)on boot-up, which are definitely not authentic Evolv chips.

I take everything with a grain of salt , you know who may be believable and who is likely to be full of it , same deal with many posters on other sites . Fan boys are very easy to figure out.

 

[herb]

THX .... never thought you implied it to be true.... just wanted to know where the quote came from so a bit of research could be done on my end...

Look under the DNA 30 clone in the discussions part , i believe the posters name is Renee.

 

[Drips Ahoy!]

If you prefer to vape with doubles and need much more wattage then no problem there , i have no issues using Kayfun's with builds in the 1ohm + range and the MVP gets it done with no issues .

I still Wrap my own coils for Pro Tanks etc.. and like builds in the 1.5 -2.0 range so needing a DNA clone is definitely not a necessity to me.

I would like to know how reliable is the real DNA Evolve chip , are we certain it's superior to what these clones have ?

If it's a 1:1 clone these Clouper's should be reliable , i am really hoping they are because i will definitely pick one up but lets see how they are down the road.

This is what I remember. Thanks for trying to help me out.

 

[Drips Ahoy!]

I think you missed the part where i said i DO NOT do twisted coils and builds that would make the DNA a wise choice , i am perfectly happy with micro single coils and cotton on the Kayfuns at 1 ohm and higher . If the MVP didn't work with those then i would of already bought a clone or mechanical.

If the DNA clones prove reliable (and thats a very big if) i will pick one up regardless because i love box mods.

Mmmmmmmmmm

 

[BlueSnake]

This was just posted on Youtube by a good friend who lives here in Ireland;

I think there is lots of good information in the video. Lots of it has already been surmised in this thread. As far as the problem with the 510 connector and the lack of good QC in the build quality of the clones. I think the most important information relayed in the video is that it's probably not a good idea to sub ohm with the clones.

My problem with the video is I have not found the ohms checkers like he used to be all that accurate either. So using that I don't know how you can say with any certainty that the ohms checker in the clones or the DNA 30 are not accurate.

I also have no idea how accurate the inline voltmeter is but it did not instill confidence especially since he dropped it. If sensitive electrical measuring devices are dropped can they still be considered accurate? Maybe some of the more knowledgeable electrical people can answer that. JMHO

 

[Drips Ahoy!]

Anybody see the preorder (lol) for the 50 watt box mods at A to Z?

Anyone know anything of the new vapor shark that's coming out?

 

[herb]

This is what I remember. Thanks for trying to help me out.

Wasn't trying to help you out , just stating what i do compared to what you do.

Mmmmmmmmmm

At a loss with this one lol.