Attack of the (Kayfun Mini V3) Clones!

[OcalaFlGuy]

Here appears to be the SXK model for about the same as FT with an alleged USA warehouse.

But the email response goes to HK, Hmmmm....

Kayfun Mini V3 Style 2ML RTA Rebuildable Tank Atomizer Silver
Bruce in Ocala, Fl

 

[crss]

I have been using a few (2) picos the past month. My mini v3 has been sitting here waiting to be built for 4 days. I can only say i am lazy at times. This little dam atty, just jumped into rotation. Simple to build, great quality from FT/ sku 4424400 Hope every one has a great day.

 

[Jumpin' In...]

There is a really bad review posted on fasttech regarding the SXK version:

The one I received was not the best quality it had a lot of burrs and absolutely stunk of oil. The positive Philips head screw was striped and just span and wouldn't tighten down the wire neither would the screws in the spares bag I think the deck screws are the wrong size and so I had to use a screw from my other kv3 mini which worked just fine. Also the spare tank is not glass it's plastic. The insulators are not peek and had fraying edges I had to clean them up and remove bits of loose plastic. They don't look heat resistant either. I gotta say the 304 ss one I bought off here is much better quality than this one even though the airflow screw didn't work on that one. The airflow adjustment screw works on this but the tolerance is very slight from off to completely open like less than a quarter of a turn . It works but I'm not surprised at all if people receive ones that don't work and I see they have so if you are looking for a really tight draw maybe look elsewhere.

Wrong size screws? PLASTIC tank? Insulator not PEEK? Sounds almost too bad to be true...

How does your SXK compare, Vinney?

 

[Vinnybagodoughnuts]

I saw that too. Don't know what version they got but its. not the one I received. My tanks are both glass. No burs or imperfections that I can detect and I am picky as heck.lol Could it be a disgruntled person????Hmmmmmmm.

 

[tchavei]

I just got 5 spare glass tanks

Enviado do meu GT-I9195 através de Tapatalk

 

[ricks]

I saw that too. Don't know what version they got but its. not the one I received. My tanks are both glass. No burs or imperfections that I can detect and I am picky as heck.lol Could it be a disgruntled person????Hmmmmmmm.

Or just one of those anti-clone people...

 

[ricks]

I just got 5 spare glass tanks

Enviado do meu GT-I9195 através de Tapatalk

How do they look? All mine were crushed.

 

[tchavei]

Not a single crack and they weren't well conditioned like my Orchid tanks.

Enviado do meu GT-I9195 através de Tapatalk

 

[Vinnybagodoughnuts]

I got one extra glass with my order so I have 2 if anyone needs one in a hurry. Also the center post was a tad loose on the 316ss but the SXK was tight as a drum.

 

[OcalaFlGuy]

When someone gets bored, would they mind shooting a pic show where the center post tightener upner is?

Thankee.
Bruce in Ocala, Fl

 

[Nailz]

Got my 1st KMV3 from 3fvape today, ordered on the 23rd March, so not too bad waiting, taking a bath now, even though it didn't smell of anything, going to get a build on it in the next hour, if all good then will order another with extra glass this time

 

[Vinnybagodoughnuts]

When someone gets bored, would they mind shooting a pic show where the center post tightener upner is?

Thankee.
Bruce in Ocala, Fl

When you remove the 510 pin the bottom plate comes off and you will see the nut. If you need a pic I can take one tomorrow but its in plain sight.

 

[Vinnybagodoughnuts]

Got my 1st KMV3 from 3fvape today, ordered on the 23rd March, so not too bad waiting, taking a bath now, even though it didn't smell of anything, going to get a build on it in the next hour, if all good then will order another with extra glass this time

Let us know what you think. I am waiting for my juice to steep a little before I build mine. I already have 6 flavors in other tanks right now.

 

[Jumpin' In...]

Let us know what you think. I am waiting for my juice to steep a little before I build mine. I already have 6 flavors in other tanks right now.

I'm curious whether your SXK's air flow adjustment works as it should.

 

[Nailz]

Let us know what you think. I am waiting for my juice to steep a little before I build mine. I already have 6 flavors in other tanks right now.

I think WOW, I bought this for my wife, as she likes to run at higher ohms, so built her a 1.5ohm coil, but of course I needed to test it, and I am really impressed, running at 12 watts and getting great flavor and vapor, we are both MTL vapors, but I normally run clapton coil (0.70ohms) at 35 watts, and vaping this KMV3 is not to far off my normal vape.

I am seriously thinking of picking a few of these up for myself, I like my claptons, but hate going through juice so fast, I will give her a few days with it, and if she likes it, will order her another and a few for myself, but will want to get the version with the spare glass next time.

I wasn't a fan of the KFV4, but this has made me a kayfun believer again, well a clone kayfun anyway

 

[OcalaFlGuy]

she likes to run at higher ohms, so built her a 1.5ohm coil

My GS Airs run 1.5 ohms and I'm happy with that. What wire, wrap size and numbers did you use please.

Bruce in Ocala, Fl

 

[Nailz]

My GS Airs run 1.5 ohms and I'm happy with that. What wire, wrap size and numbers did you use please.

Bruce in Ocala, Fl

28 gauge kanthal, 8 wraps around a 2.5mm bit

 

[Vinnybagodoughnuts]

I'm curious whether your SXK's air flow adjustment works as it should.

I'll test it for you in the morning and post my results.

 

[tchavei]

Guys, is the MAP code still working on Fasttech? It gives me "invalid coupon"

 

[Cari]

Guys, is the MAP code still working on Fasttech? It gives me "invalid coupon"

Still working for me. Make sure and use all CAPS.