Attack of the (Kayfun Mini V3) Clones!
- Thread starter KTMRider
- Start date
- th_trl_thread_readers 0
- Status
The reviews state that it only really works with tanks the same diameter as the devise.I mostly use my Nautilus minis on it.Also I saw one person say that if the device doesnt already sit flush the ring moves around.I think I will just live with it I don't want to give them 10.00$ for something they probably paid .10 for.
Yea I didn't like the smaller diameter it tapered off to. When you purchased the 2.5 there's options to choose in the drop down menu to upgrade.
You can always send it back to put the P3 on.
You can always send it back to put the P3 on.
I see that.I was trying to save a little money and really just was curious about all I had heard about them.I wasn't considering the fact that my 19 mm atty would not even sit close to flush on the thing.Oh well live and learn.
I built both my attys last night.Tried using 26 gauge but it was proving very difficult to get them captured.I gave up and built them with 28. Still would like to see a better method or larger screw heads to help with this.Even a small notch on one side of the screw would help.
No it doesn't. 
Well I just filled the gold one SKU4430900 and what I originally thought was a con is actually not.The fact that the gold coating does not cover the entire base means you have a visual reference for how far open the juice control is.Also I have found that my desired setting is right at the transition point meaning you can't really see any ss.It is working fantastic.No gurgling once I adjusted the juice control and it is buttery smooth with the perfect ammount of resistance.Not too stiff not too loose.Flavor is great and I am loving it.I did not touch the air flow grub screw and it is slighty more airy then my Nautilus mini which I am very happy with.
I will post my results with the SXK in the next couple of days.
Using 80vg/20pg 4.2 volts / 1.2 ohms
Well I just filled the gold one SKU4430900 and what I originally thought was a con is actually not.The fact that the gold coating does not cover the entire base means you have a visual reference for how far open the juice control is.Also I have found that my desired setting is right at the transition point meaning you can't really see any ss.It is working fantastic.No gurgling once I adjusted the juice control and it is buttery smooth with the perfect ammount of resistance.Not too stiff not too loose.Flavor is great and I am loving it.I did not touch the air flow grub screw and it is slighty more airy then my Nautilus mini which I am very happy with.
I will post my results with the SXK in the next couple of days.
Using 80vg/20pg 4.2 volts / 1.2 ohms
Last edited:
The SXK one is nice. I'm on my third refill. Using 28ga at the moment also.
The only thing I'm missing now coming back to tanks is the throat hit I had on drippers.
The only thing I'm missing now coming back to tanks is the throat hit I had on drippers.
I've had my 2 km3's from FC for just under 2 weeks now and I've been using them almost exclusively and in TP mode.
The one of the o-rings on the base (the bigger one) broke and the replacement o-rings didn't fit. I'm using one that's slightly smaller so the tank turns easier than the other one but still works great.
If you're using TP, make sure you adjust your afc screw in. That fixed my floating resistance.
I also had a few sample e-juice bottles that I was trying out last night. The design made it really easy to swap juices fast.
The one of the o-rings on the base (the bigger one) broke and the replacement o-rings didn't fit. I'm using one that's slightly smaller so the tank turns easier than the other one but still works great.
If you're using TP, make sure you adjust your afc screw in. That fixed my floating resistance.
I also had a few sample e-juice bottles that I was trying out last night. The design made it really easy to swap juices fast.
KTM I purchased extra orings if you need one PM me. I will check the sizes when I fill The SXK to see what replacements fit where.
Thanks for the offer. I have a bunch of o-rings too. The same sized o-ring was too big so I went slightly smaller. It seals fine but it makes the tank spin a bit more freely too. Not a big deal. I was too lazy to dig thru all my o-rings to find the perfect fit.
THANK YOU FOR WARNING ME NOW
Lollllll.
Yesterday, 2 am and I decided to put the air screw back on. Removed the bottom pin, screwed in the air flow screw, closed the bottom, put it back on my mod: "New atty? Yes, no?" Hell, yeah! And I didn't even look at the resistance... 0.04 Ohms... No vapor, just a tiny sizzle... Wtf?
Unscrewed the base, looked at it, couldn't see anything wrong (2 am remember?). Put it on the mod, fire it again and FINALLY I notice the shifted positive deck making a spark with the base... Ugh. Corrected it. Vaping like a champ now.
Regards
Tony
Enviado do meu GT-I9195 através de Tapatalk
I ordered my mini from 3fvape 24 hrs shipping. They shipped next day on March 25, but tracking still says en route. Canada post's website says the same thing. I shipped it to a post office for pickup. Is it possible that it's there or should I trust the tracking website(s)? I was going to phone the local canada post but of course they don't provide their phone numbers...
Go to the post office and see if they have it??? I don't know how Canada Post service works but I got my order in 10 days.
Any other members from Canada order form 3F? How long does it take to get delivered? Waiting for new vape gear is the worst.
ya I hate waiting. It's only been 13 days, but I think I'll go by tonight or tomorrow and see if they have it. But I wish I could phone them. Heaven forbid they give contact info for each post office.
Rat .......s. I thought ours were idiots for that too. You can find them, but it's not easy.
Worst yet, when you KNOW you have a stuck in the mail issue, it is nearly impossible to talk to a human. There is no Selection to. All I've found was to hit the 0 button until it about set afire. Finally a human. Took 3 days once to reach this NJ PO where the package had shown on tracking sitting there at the PO. After 2 days they were unable to say where it was. (It was a watch going to Seiko. It was already AT Seiko waiting to be logged in.)
IMO, our PO Rocks It about 98% of the time. But when they blow it, watch the hell out.
Bruce in Ocala, Fl
- Status
