Hey! I only bought 2 black ones from VapeNW
Attack of the (Kayfun Mini V3) Clones!
- Thread starter KTMRider
- Start date
- th_trl_thread_readers 0
- Status
Well that's what happens when you live on Mars. 10 months from here to there is probably pretty good, actually.
Edit: Oops. Just saw AstroTurf's Mars comment. Jumped the gun.
Last edited:
Glad I got my silver from VapeNW before everybody went crazy.
FWIW, I've never received anything from FT in less than 3 weeks...up to 6. If you pay for the faster shipping, you might as well order stateside.
FWIW, I've never received anything from FT in less than 3 weeks...up to 6. If you pay for the faster shipping, you might as well order stateside.
You could always order the black version and use the parts you need on your SS version.. and amazing it will match your mods
FT orders to me about 2 weeks on avg. You have to pay attention to the ship "when" comment, like Next Day or in 7 Days or out of stock.etc...and put into the same ship "time" in same cart and spend $20 ea order.. easy..peasy.. IMO
FT orders to me about 2 weeks on avg. You have to pay attention to the ship "when" comment, like Next Day or in 7 Days or out of stock.etc...and put into the same ship "time" in same cart and spend $20 ea order.. easy..peasy.. IMO
My order from Tuesday night just shipped from fasttech, said it ships in 3 business days when I ordered it so they're right on track. Ordered a kayfun mini v3 & a kayfun mini v3 plus.
Seriously Sweet Collection!My daily rotation.
I love it when the price of the mods are 10x the price of the attys.
What are the two silver ones in the middle?
I did put my email address in to be updated when vapenw restocks the silver. I only want one or two more kayfuns. I'm sure a lot of people want one or more.
My biggest problem with FT is the way the free shipping is handled over there. They may get your stuff together and give it to the shipper, but the shipper may hold it a week before they get a container full enough to justify shipping.
From left to right: Silo case DNA75, Silo DNA75, Silo DNA200, Hana v200, VS DNA200, ERM+ DNA200 (1300mah 3s lipo), ERM+ DNA200, VS rDNA40, VS DNA40, Cloupor w/DNA40, Hana mini clone with DNA40Seriously Sweet Collection!
I love it when the price of the mods are 10x the price of the attys.
What are the two silver ones in the middle?
This isn't the 1950's. Everything is shipped via air post by various carriers. China Post usually takes 1-3 days to process packages.
Yeah, fast tech is hit or miss.. I did place an order for a steel tank and ego battery, and its been a few days already and It says will ship out on the 28th. So it won't even leave the door till the 28th.. It will take a long ... time to get to me that is why I am trying to scramble for a decent clone in the U.S. what i did is over paid for a replacement glass from ebay..
Hey y'all haven't been around for a minute, but I recall some discussion here about the resistance changing/jumping around sometimes on these KFMV3s. Tobeco version if it matters. I thought by ensuring a tight connection of center post and positive block was the end-all solution, turns out it's not for me.
Coils lead screws tight and center post tight, what else am I missing? Seems if I take off the bottom plate and 510 pin to access air flow screw, then re-install, resistance goes back down to say 1.48 but after a while I notice a slight different hit and look down- it reads 1.57 or so. Does it on two different mods too.
Almost always goes back to 1.48 just by removing and replacing that bottom pin.
Any ideas? Thanks folks
Coils lead screws tight and center post tight, what else am I missing? Seems if I take off the bottom plate and 510 pin to access air flow screw, then re-install, resistance goes back down to say 1.48 but after a while I notice a slight different hit and look down- it reads 1.57 or so. Does it on two different mods too.
Almost always goes back to 1.48 just by removing and replacing that bottom pin.
Any ideas? Thanks folks
Hi, try remove the airflow adjustment grub screw.. i had similar issue even after tighten the center post.. decided to remove the screw and bamm.. constant ohm all the way..
Sent from my Redmi Note 2 using Tapatalk
I emailed them they said they won't be getting the silver back in stock.. I find that pretty weird.. There has to be some China site out there that has this tobecco in silver.. Anyone know where the silver version is sold?
Well, I thought that too, but even used big handle screwdriver and torqued it real good. And still tight when removing it, after ohms have went up.
Air flow grub screw-removed it completely thinking that was keeping 510 pin from tightening everything together but that wasn't it either. It doesn't effect my vape ALL that much really, but these kinda things just irk me sometimes and I just want to figure it out!
Good suggestions and thanks. I still haven't vaped another atty since these minis, pretty much my vaping bliss when working right.... which is just about all the time anyway
Does it have the updated insulator?Well, I thought that too, but even used big handle screwdriver and torqued it real good. And still tight when removing it, after ohms have went up.
Air flow grub screw-removed it completely thinking that was keeping 510 pin from tightening everything together but that wasn't it either. It doesn't effect my vape ALL that much really, but these kinda things just irk me sometimes and I just want to figure it out!
Good suggestions and thanks. I still haven't vaped another atty since these minis, pretty much my vaping bliss when working right.... which is just about all the time anyway
Looks like I am going to be down to 1 kayfun mini v3 plus, only ever broke 1 glass tank in 3 and half years of vaping, but dropped my kayfun plus glass while cleaning, but didn't smash so thought I was safe, but once I got the tank put together, see I have hairline crack down the whole side of the tank, and of course fasttech doesn't sell extras for it
Yea. I've been looking for replacement glass for that RTA all over creation and no luck. May have to break down and buy some PC tubing and make my own. [emoji35]
Sent with my communicator by Tapatalk[emoji92]
Sent with my communicator by Tapatalk[emoji92]
- Status
