Battery ?

Status
Not open for further replies.

whughes1989

Full Member
May 3, 2011
41
3
Saint Louis
I should be getting my Buzz pro and the batteries that come with it today! The only batteries i have used it the past where AW IMR 18650. Witch i meter out when they come off the charger, and when they are losing power. From what i understand they should be 4.2v coming off the charger and no lower than 3.6 are you can damage them. Are the batteries that come with the buzz the same or different? Should you meter them out coming off the charger? And how low can you let your batteries get? Also i wanted to know where do you put your test leads on the buzz Pro to test voltage?

Thanks Will
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
WHAT ??? that is not right 5 , your chargers are bad buddy !! that can cause battery problems if you know what I mean .
Both of them? I just got the one from someone that you know very well. I'm going to check my meter to see if it's having problems or maybe it's the batts. I think it's the batteries because I just checked all my other ones and they are all in the range but this one set is still way up there. They are over a yr. old. I got them with the original beta buzz but what's amazing is the power is going up and not down. Maybe I'll use them to jump start the old Diamond T.
images
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
I just took some Infinity batteries off the charger and they were clear past 4.5 volts. Together they read 9.2volts so I put a set that needs charged on the other charger so we will see what they read. Wow, I'm glad I checked this stuff out.

What's weird is when I first touch the probes to the battery it reads 4.42 then it slowly climbs to 5.1. If I remove the probes and wait a minute then test again it goes right to 5.1.
I will figure this out.
 
Last edited:

BuzzKill

Unregistered Supplier
ECF Veteran
Nov 6, 2009
7,412
5,145
65
Central Coast Ca.
www.notcigs.com
I just took some Infinity batteries off the charger and they were clear past 4.5 volts. Together they read 9.2volts so I put a set that needs charged on the other charger so we will see what they read. Wow, I'm glad I checked this stuff out.

What's weird is when I first touch the probes to the battery it reads 4.42 then it slowly climbs to 5.1. If I remove the probes and wait a minute then test again it goes right to 5.1.
I will figure this out.

Change the battery in your meter 5 ! I just had to do that because of bad readings .
 
Status
Not open for further replies.

Users who are viewing this thread