Beta 5 510/801 fusion thread

[mwa102464]

AngusATAT,

I have a PO Box at my beach house and it is amazing, the treatment I get having that compared to dealing with deliveries like I use to, night & day difference,,, I have a similar slow post office in the beach town I am in and in the summer it is really really slow and just horrible, got the PO Box and bamb never another issue ! Just saying

 

[mwa102464]

That was a selling point for me. To get all that vapor without my eyeballs depressing from a hard draw. I don't care for airy but with these the vapor is massive to compinsate for air. I also love the fact that I don't need to take those loooong draws to get a decent hit. I like these better than any others I've tried to date and I have a bunch. I do wished they were megas though. The other down fall is I've been using up too much juice because I can't put it down.

Thanks Isaac for another incredible cartomizer.

Dang Angus, not again?

mwa102464 Right,choices.

Switched, I wondered if they would fit the cone on an Ego with that 801 part being bigger. Great review.

5card,

it works fine, EGO/510-801 adapter cone fits perfectly fine and the unit looks super fine with this set up, just did it

 

[5cardstud]

I think it would work with scotch tape vice the condom.

Or these little rubber bands :100 Elastic Rubber Bands 4 Flowers/ Floral Arrangements - eBay (item 130231159882 end time Nov-02-10 07:40:38 PDT)

I'm wondering if it will ever stop working good. I started using this last week and it's still going strong.

 

[AngusATAT]

Ha! Finally!

The wife just sent me a text and let me know that the package finally arrived. A little late in the game, but at least I should be able to give some input soon.

Isaac, I also placed an order for four of the LR801 Semi atties today, since everyone tells me I just have to try them. I selected Priority shipping, so let's see if that makes any difference.

 

[Switched]

Glad to see the Pony Express stopped by. I think it is high time USPS invests in a horse, ponies are as bad as sled dog teams for speed

 

[AngusATAT]

Glad to see the Pony Express stopped by. I think it is high time USPS invests in a horse, ponies are as bad as sled dog teams for speed

Apparently worse, as your dog sled team got your package to you about a week before my pony arrived gasping at my mailbox...

 

[mwa102464]

Ha! Finally!

The wife just sent me a text and let me know that the package finally arrived. A little late in the game, but at least I should be able to give some input soon.

Isaac, I also placed an order for four of the LR801 Semi atties today, since everyone tells me I just have to try them. I selected Priority shipping, so let's see if that makes any difference.

Angus,

you are gonna love this 2ohm semi Atty, I have to say I have been using this on my buzz and dripping with it and OMG is this Atty awesome. Here's exactly what im doing with it, I like the stock soft rubber mouth piece that comes with it because the draw is best with these and there very comfy in the mouth compared to a derlin 801 in my opinion, so I pop the mouth piece off and I drip into this Atty til my liquid comes up to the Bridge, throw on my mouth piece and vape until it needs filling again, This dang Atty puts out more vapor and the best taste out of any Atty I have ever used to date. Issac this is a huge winner buddy huge..!!!

 

[AngusATAT]

I guess we'll see soon enough. If Isaac ships it out today or tomorrow, I should actually have it delivered in the next month or two, or whenever the USPS gets around to it.

 

[Vaporologist]

I thought that the LR801 Semi is 2.5ohm, not 2.0 like the Mini. The Mini rocks but it's not drip tip friendly

Edit: The HV801 Semi 3.5ohm is just AWESOME at 6V!

 

[mwa102464]

Well thanksgiving and Christmas are coming Angus these will be a sweet gift for either holiday,, hahahah

 

[mwa102464]

I thought that the LR801 Semi is 2.5ohm, not 2.0 like the Mini. The Mini rocks but it's not drip tip friendly

Edit: The HV801 Semi 3.5ohm is just AWESOME at 6V!

My bad, I am speaking of the Mini,,,, I just pop the soft mouthpiece off that comes with it and fill to the height of the Bridge pop it back on quick and vape away it last plenty long enough that its no big task and I am enjoying these babies immensely

 

[AngusATAT]

Well, now that mine have finally shown up and I've had a little time to try one out, here are my initial impressions...

I'm diggin' it.

I'm using one on my 3.7v Big Brother mod, with two high drain 14500 batteries, and 24mg, 20%VG Tasty Vapor Amaretto Stone Sour. The vapor production is well above what I would expect out of a cartomizer. It's got a very light draw (airy), but I'm not finding it as a negative since I don't have to pull on it much at all to get the vapor out. There is quite a bit of "Rice Crispies" effect when vaping it. (Snap, crackle, and pop!) It doesn't get too hot, and the juice flavor is great.

I'll give it a shot at a little higher voltage, but honestly I think it's pretty much perfect just where it is.

For reference, my mod is putting out a solid 4.0v, and the resistance on the carto is reading 3.1 ohms.

 

[Iken]

Finally Ecf is back up!
That's Great news Angus! I wanted to throw these up on the site, but was hesitant for you and The Look (I hope she's ok) I sent her a message and noticed her last appearance was on the 27th of October. Getting worried for her.

I just received yet another new product today!
1st impressions/Short preview: This one is really going to be mind blowing. Harnessing the capacity and quality of the 808 Mega, delivering pure flavor like the 901, giving the fierce yet smooth TH of the 510 Platinum while being Drip tip supplied standard. The MEGA 510 Drip Style.
Now from seeing discussions diminishing. I fear that I'm overworking you guys too much. So I'm going to leave the call in your hands if you would like to Beta test these fellas. Just let me know by Post,Pm or Email.

 

[AngusATAT]

I'm always good to go, as long as the USPS doesn't jerk me around. I got the Semi 801 Atties today... they made it here quick for a change. I'm waiting to try those out until after I work these cartos a bit.

I'm going to try and expand on my review of these a bit tomorrow. I want to slap one on my Buzz and give it a workout at some different voltages.

 

[Switched]

Reporting for duty as well. Those sound interesting...

 

[Vaporologist]

Finally Ecf is back up!
That's Great news Angus! I wanted to throw these up on the site, but was hesitant for you and The Look (I hope she's ok) I sent her a message and noticed her last appearance was on the 27th of October. Getting worried for her.

I just received yet another new product today!
1st impressions/Short preview: This one is really going to be mind blowing. Harnessing the capacity and quality of the 808 Mega, delivering pure flavor like the 901, giving the fierce yet smooth TH of the 510 Platinum while being Drip tip supplied standard. The MEGA 510 Drip Style.
Now from seeing discussions diminishing. I fear that I'm overworking you guys too much. So I'm going to leave the call in your hands if you would like to Beta test these fellas. Just let me know by Post,Pm or Email.

That sounds quite interesting, Isaac. What's the ohm rating? Also, I know this will be determined after they are tested but, what voltage are they intended for? Gracias.

 

[grimmer255]

Finally Ecf is back up!
That's Great news Angus! I wanted to throw these up on the site, but was hesitant for you and The Look (I hope she's ok) I sent her a message and noticed her last appearance was on the 27th of October. Getting worried for her.

I just received yet another new product today!
1st impressions/Short preview: This one is really going to be mind blowing. Harnessing the capacity and quality of the 808 Mega, delivering pure flavor like the 901, giving the fierce yet smooth TH of the 510 Platinum while being Drip tip supplied standard. The MEGA 510 Drip Style.
Now from seeing discussions diminishing. I fear that I'm overworking you guys too much. So I'm going to leave the call in your hands if you would like to Beta test these fellas. Just let me know by Post,Pm or Email.

oooh oooh pick me..... why did I just have a flash back to when I was kid when playing kick ball.... hmmmm.... lol ah good times.

edit:

Will you be getting any eliquid in? Gotta get some menthol...

 

[5cardstud]

You know I'm always ready. I finally finished the fusion. It finally started losing production today. Probably needs a good cleaning is all. I put it through some tough vaping for a very long time. I hope you market them.
Your are 3 ohm Angus huh? Mine was 2 ohm. I like the draw on these too.
If those ones you have are as good as the last 2 that would be great. You must have one heck of a good engineer to come up with these or are you the brains behind the product?

 

[Iken]

Hey guys, Another apology for MIA! What a week!
Yesterday we attended a half Lebanese half Greek wedding! It was an old friend/family of Val and lasted from the a.m. to late night. It was a real blast seeing 2 cultures collide into a ceremonious eventful day.However I did wake up with a brutal head cold.

I'm always good to go, as long as the USPS doesn't jerk me around. I got the Semi 801 Atties today... they made it here quick for a change. I'm waiting to try those out until after I work these cartos a bit.

I'm going to try and expand on my review of these a bit tomorrow. I want to slap one on my Buzz and give it a workout at some different voltages.

Thank you Angus, I was thinking the last shipment was just a fluke. So from here on out, I'll DEFINITELY use Priority for you.

Reporting for duty as well. Those sound interesting...

Thank you soldier! I noticed you been jogging around Avatars lately. Each one has been looking better and better. I was working on one for you this morning. If you don't like it, it's totally ok or if you like I can work on it some more Either way it's here my friend.

That sounds quite interesting, Isaac. What's the ohm rating? Also, I know this will be determined after they are tested but, what voltage are they intended for? Gracias.

They actually have an overall of 3.0Ω I made the first set this way for versatility. They handle 3.4V on the Ego perfectly and can handle 5V without a hitch. However once 5V is executed, there's no going back to the sweet 3.4V that was initially provided.

oooh oooh pick me..... why did I just have a flash back to when I was kid when playing kick ball.... hmmmm.... lol ah good times.

edit:

Will you be getting any eliquid in? Gotta get some menthol...

Haha Sure thing Grimmer, The Look has been Mia which is very disturbing, but will glad to have you on board as you were on the top of my list to Bea. Out of the liquids RY4 and Menthol has been nailed flawlessly. These will most like be our starters. The order has been placed and now we're just searching for a new logo aren't hiccups fun? Rome wasn't built in a day

You know I'm always ready. I finally finished the fusion. It finally started losing production today. Probably needs a good cleaning is all. I put it through some tough vaping for a very long time. I hope you market them.
Your are 3 ohm Angus huh? Mine was 2 ohm. I like the draw on these too.
If those ones you have are as good as the last 2 that would be great. You must have one heck of a good engineer to come up with these or are you the brains behind the product?

Thank you 5card! Ahh it's just heads colliding, coming up with ideas and running them through. It can be a pain as we aim for something in particular then it comes out differently no matter how many days we spend making it. I work with a few engineers from a couple manufactures that are very friendly and willing to find that perfect vape as we create success for me, they too will share it.

 

[5cardstud]

Hey guys, Another apology for MIA! What a week!
Yesterday we attended a half Lebanese half Greek wedding! It was an old friend/family of Val and lasted from the a.m. to late night. It was a real blast seeing 2 cultures collide into a ceremonious eventful day.However I did wake up with a brutal head cold.


Thank you Angus, I was thinking the last shipment was just a fluke. So from here on out, I'll DEFINITELY use Priority for you.
Thank you soldier! I noticed you been jogging around Avatars lately. Each one has been looking better and better. I was working on one for you this morning. If you don't like it, it's totally ok or if you like I can work on it some more Either way it's here my friend.

They actually have an overall of 3.0Ω I made the first set this way for versatility. They handle 3.4V on the Ego perfectly and can handle 5V without a hitch. However once 5V is executed, there's no going back to the sweet 3.4V that was initially provided.

Haha Sure thing Grimmer, The Look has been Mia which is very disturbing, but will glad to have you on board as you were on the top of my list to Bea. Out of the liquids RY4 and Menthol has been nailed flawlessly. These will most like be our starters. The order has been placed and now we're just searching for a new logo aren't hiccups fun? Rome wasn't built in a day
Thank you 5card! Ahh it's just heads colliding, coming up with ideas and running them through. It can be a pain as we aim for something in particular then it comes out differently no matter how many days we spend making it. I work with a few engineers from a couple manufactures that are very friendly and willing to find that perfect vape as we create success for me, they too will share it.

I hope you get better Isaac, Them colds can be torture. I've been nursing a back all weekend.