"Blowing clouds" and sub ohm vaping... Why?
- Thread starter MiPaDo
- Start date
- th_trl_thread_readers 0
- Status
The backpack this ^ battery was in at the time.
Thanks bad for the link. I forgot that was the actually battery from it.
I thought I read a version 2.0 and 2.5 will fire 0.8Ω at up to 3.4V.
I have zero interest in blowing clouds or messing around with sub-ohm stuff. Having said that though, I am a big believer in "to each their own". I think if people worried more about themselves and less about other people the world would be a better place. Just my opinion on the matter.
one thing kept going through my mind while reading this thread...I have worked with electronics (tube amplifiers) as a hobby for many years, also R/C model aircraft, etc. I always carefully designed my stuff for long and reliable life and always followed the old rule to never exceed 70% of rated capacity of any device. The current ratings on batteries are most likely design center maximums and good practice dictates staying below that rating. That doesn't mean they can't be approached or maybe even be exceeded, but at some point it becomes a crap shoot. I'm sure there are many ways to get a desired result in vapor production with coil design, airflow, air chamber configuration, liquid, wick, etc. without exceeding the golden rule of thumb.
There is no reason to not use any of the 20+ amp batteries Baditude listed in ANY mod you vape. Don't know about anyone else but the cost of one battery, any battery is less than what I was dropping each day for my cigarette fix.
So that would be 2.8V at 0.8Ω. Looks like it can't go that low.
Last edited:
So I will get into this wonderful discussion because everyone here seems sensible. I don't enjoy any more than one coil... tried dual and more but still got back to single coil. I don't really coil more than 0.8 and don't go below 0.6, I have tried micro/nano/dragon/poop in diaper and about ever other coil and still prefer a regular 3/4 wrap with yarn or cotton ball. I do have multiple setups and one is a nano dragon/poop in diaper but modded the top cap to work with the design and get great results.
I have found that all are great options depending on what you are trying to achieve with vaping, I stick to what I like and believe it or not it is only because I like to conserve battery life- thats it honestly... I worked for Interstate batteries for a long time and have been trained in the art of batteries and could go on and on but it has been covered. bottom line that the more I stress the batts the lower the life span, big deal as they are cheap for great batts. so I go for longer life out of them even thou I have 20+ batts lol. out of all the coils I have built dang near all the same for the most part but each has little advantages and disadvantages.....If you enjoy it do it, if not keep trying till you find your thing! I'm just glad people care enough not to let some ones first vape be a mech/rda on 0.5 ohm build when they need to be on a ego/vivi or what have you. even thou I am above the median for knowing batts and electronics I am still thankful I started small and within a month moved to vv/vw then straight to mech/rba....it was a time needed to study about what I was capable of doing safely. Vape on my friends!
I have found that all are great options depending on what you are trying to achieve with vaping, I stick to what I like and believe it or not it is only because I like to conserve battery life- thats it honestly... I worked for Interstate batteries for a long time and have been trained in the art of batteries and could go on and on but it has been covered. bottom line that the more I stress the batts the lower the life span, big deal as they are cheap for great batts. so I go for longer life out of them even thou I have 20+ batts lol. out of all the coils I have built dang near all the same for the most part but each has little advantages and disadvantages.....If you enjoy it do it, if not keep trying till you find your thing! I'm just glad people care enough not to let some ones first vape be a mech/rda on 0.5 ohm build when they need to be on a ego/vivi or what have you. even thou I am above the median for knowing batts and electronics I am still thankful I started small and within a month moved to vv/vw then straight to mech/rba....it was a time needed to study about what I was capable of doing safely. Vape on my friends!
I've built a couple of the "dragons", and the results were epic! For taste and "out and about", I still just run a .8-.9 nano with a single strand of peaches and cream yarn through the coil. I do keep one dedicated dripper with a dragon just for sport, .5 single coil on the diaper 
Dual Micro-coils on an RSST, 0.6ohms, with pure organic cotton wick. I was hoping for around .8 but eh, still within the AW IMR's Amp limits. Air hole drilled out to 5/64s. very wide open for me, I prefer tighter draw. I find doing lung hits too hard, but when I do with this one it makes huge clouds.
I still prefer my ProTank 2 on an eGo-C Twist LOL. Usually use a Vamo V3 with a ProTank 2, or Carto-Tank. And I just ordered the new Futura DNA20 Mod and a Russian 91% which will most likely become my daily driver.
I still prefer my ProTank 2 on an eGo-C Twist LOL. Usually use a Vamo V3 with a ProTank 2, or Carto-Tank. And I just ordered the new Futura DNA20 Mod and a Russian 91% which will most likely become my daily driver.
Last edited:
- Status
Similar threads
