Burning Cartomisers? Dangerous?-510/Kr808/4081...etc filler type cartos

[Katya]

I looked at them, but can't quite figure them out. They seem to go under a cone, though. The eGo-t cone-shaped atties are their own cones, so to speak. I thought they would make a "T" equivalent of a type B, cylinder-shaped mega eGo atty.

Also, the picture shows them with the 1100 mAh battery, which is bigger (longer and fatter) than the standard eGo. Very confusing.

 

[Kent C]

I looked at them, but can't quite figure them out. They seem to go under a cone, though. The eGo-t cone-shaped atties are their own cones, so to speak. I thought they would make a "T" equivalent of a type B, cylinder-shaped mega eGo atty.

Also, the picture shows them with the 1100 mAh battery, which is bigger (longer and fatter) than the standard eGo. Very confusing.

That's what I see too - but they're 2.5ml tanks. There are others that use the eGo-t atty with longer tanks too, I thought. Shouldn't be long though and the birdy said it was cylinder types so hopefully that's what they are. I didn't find any of those on alibaba though.

Katya, how many PVs do you have going at a time?

 

[Katya]

Usually three or four. One eGo, one 3.7v Riva, and a mini or two, either a kr808 or a SmokeStik, or both. I like variety.

 

[Kent C]

Usually three or four. One eGo, one 3.7v Riva, and a mini or two, either a kr808 or a SmokeStik, or both. I like variety.

I have a bunch but only because of the different flavors mainly. Mostly eGo/Rivas, but a 306lr (applewood) and a big brother (espresso/cappuccino).

 

[Katya]

And what do you use on your BB? An atty? A carto? What's your preferred wattage with the coffees? I like the coffees but I'm really reluctant to put them in a tank, even though BWB coffees are clean and not too dark. I use them in my 2.0Ω Boge cartos.

 

[Kent C]

And what do you use on your BB? An atty? A carto? What's your preferred wattage with the coffees? I like the coffees but I'm really reluctant to put them in a tank, even though BWB coffees are clean and not too dark. I use them in my 2.0Ω Boge cartos.

On the BB cranked to 6+v + Joye 4.2ohm atty and driptip. 2 drops DV's Doppio Espresso, 2 drops BWB Espresso, 2 drops BWB Capp. The only one that tastes better after it sits a while - I'll 'fix' it by taking a few draws after dripping, then let it sit. I added DV's Black Currant back into the line up (used to be janty stick 801 only) and it's tasting good on a tank with a regular eGo batt and regular eGo-t atty. I have the new LR (eGo-t) attys on the habana reserve and real tabs.

The 306lr is a cisco. I've tried others - joye, iken, COV, nhaler, no bridge from lori, etc. and cisco seems to hold up the best - although I lost one (burned out) on vacation. It happens but the other one I had prior lasted 3 months +. I also got a 510-510 adapter from avid hoping that it was the right size for fitting a tank atty on the bartleby but it's too short. I think two of them though would be better than the 510-901-510 set, but it would still be a bit long. Surprised someone hasn't measured from a flush mod connection and made one the right size. The pipe cutter really didn't work that well on eGo attys. One could make a good connection for the mega eGo carto but I prefer the atty/cart now atty/tank set up. Just as much ejuice and no hassle filling.

 

[Aral]

Could anyone tell their opinions on these cartomizers?
Electronic Cigarette - Cartomizers - KR808D-1 Cartomizer
Those are KR808D-1 from Kanger. How good are they in general? Since the blank ones are currently out of stock, how well do the prefilled ones respond to filling them with a different taste of e-liquid after they are empty?

 

[Katya]

Hello, Aral, and welcome!

Here is a little chart that lists the most common kr808 cartos and their brief evaluation. It needs updating, but the basic info stands.

http://www.e-cigarette-forum.com/fo...1-etc-filler-type-cartos-297.html#post2144942

I see you are in Croatia. Where do you usually buy your e-cig supplies? The kr8 is less popular in Europe, for some reason, than it is here. But you probaly could also order from China.

I prefer the Boge kr808 cartos, but I've heard that the new Kanger cartos are a bit different and possibly improved. They have longer wicks, for one thing. I started with Kanger cartos, then switched to Boge.

If you're waiting for LF to restock, I suggest you order a box of each kind and test them side by side. You'll know soon enough which ones you prefer. Prefilled cartos are not a problem at all. Just refill with a compatible flavor and before you know it, you'll be vaping your own juice. Try less aggresive flavors, to begin with, that blend well with your favorites.

 

[Aral]

Thanks Katya .)
So, what would you call compatible flavours?
Is there any flavour that's really neutral, because I'd like to test a wide variety of liquids for starting.

 

[Katya]

Well, I would say you need flavors that are compatible with the flavors you like. I checked the website and they have a lot of tobacco flavors, I'm pretty sure they are all Dekang.

What do you like?

 

[Aral]

This is my first PV, so I'd like to try as many as possible Menthols, fruits, some tobaccos, that would be basically it for starting.

 

[Katya]

Sounds good.

The problem is that they are really out of all the good ones. What strength do you vape? They have only 24 mg menthol, that's too much for me, but maybe you can handle it. Maybe a Flue Cured, Virginia or Vanilla. I like coffee, but they are out. Cherry is usually bad, tastes like cough drops. DK Tab is very peanutty. I like the USA mix, but they are out of it, too.

I say get a menthol and vanilla, they will blend with other minty flavors and with fruits very nicely. And one tobacco. That's for starters.

 

[Aral]

I didn't even notice these :Electronic Cigarette - Cartomizers - Boge Cartomizers
Boge 801 cartomisers. You prefer these over the Kangers Katya? What's the difference between the 801 and kr808 battery?

 

[Katya]

This is really frustrating. The 801 cartos are not compatible with kr808 batteries. You'll need a kr808>801 adapter, and they do not carry it. Anyway, I couldn't find it on their UK website.

 

[Katya]

However, they do carry a 901>801 adapter. That should do it. Just to be safe, why don't you ask Abe or Ty on LF subforum if the 901>801 will actually work on your--I assume--kr808 batteries.

 

[uzzaperez]

801 Cartos? Those must be monsters. I'm just envisioning something that puts those jumbos I was looking at to shame. Too bad there isn't a picture. Like to scale. Like to scale next to a school bus.

 

[earthpig]

My understanding is the 901's are the same threading as 808 but the depth of threads is deeper on a 901. That might play havoc, but I'm assuming here.

Oh, and Katya. Thanks for the lead on Good Prophets , for adapters. I'm awaiting delivery on my 510 carto to 808 battery set up now. Ordered 10 (x 2) for the heck of it. @$.99c each(2 piece), why not.

 

[Katya]

801 Cartos? Those must be monsters. I'm just envisioning something that puts those jumbos I was looking at to shame. Too bad there isn't a picture. Like to scale. Like to scale next to a school bus.

Aha! Not necessarily!



Sorry about the Danish. I couldn't find an English version. But trust me, he likes them. He's using them on his Silver Bullet. He's not happy about having to use an adapter, though. But he really likes the carto! I want to try them now myself. Oh, the money trap.

The only other smallish 801 carto can be had at IkenVape. But it's not a true 801, it's a hybrid (801 connection and 510 guts. Quite nifty. I tried those with a 501>801 adapter and it's nice, but I don't really need it--I'm using 510 cartos with 510 guts and I don't need the adapter!

801 Fusion Cartomizer

My understanding is the 901's are the same threading as 808 but the depth of threads is deeper on a 901. That might play havoc, but I'm assuming here.

Oh, and Katya. Thanks for the lead on Good Prophets , for adapters. I'm awaiting delivery on my 510 carto to 808 battery set up now. Ordered 10 (x 2) for the heck of it. @$.99c each(2 piece), why not.

Hello, Piggy! You're right about the threading, but there are some compatibility issues, sometimes. That's why the Riva 901 owners often need to buy a 901>kr808 adapter because some newer kr8 cartos don't work on the 901 connection (the old Kangers do). Go figure.

Yes, Rob's prices are unbeatable. But ten???? You go, girl!

 

[Neo]

901 atties fit on an 808 batt without adapter.

808 cartos do NOT fit on a 901 batt; adapter is needed.

 

[Aral]

I've decided to go with a DSE 901 battery + 901 to 801 adapter + Boge 801 carts. You think this will be good?