Buzz Pro Final prototype tubes and Pix

[BuzzKill]

Ok so here are some crappy pictures of the Buzz Pro tubes and new top caps , I am NOT a photographer as you can tell LOL !

to summarize the improvements over the OLD Buzz

1. New Tech I.C. Controller , Massive increase in battery life per charge, 100% minimum.
The IC is running at 93-96 % efficiency .

2. Wheel type voltage adjuster like the Infinity

3. Use of LR attys/cartoz is OK !!!

4. Removed the knurling and it is now sand blasted for a slightly rough finish for a good grip.

5. Bottom MASTER SWITCH !!! this is working great , just a 1/8 turn of the bottom cap turns everything OFF the batteries are dis-connected by doing this.

6. New deeper juice well on ALL top caps and a sleeker looking design .

did I forget anything ?>??

 

[Bovinia]

That's almost as handsome as 5C!! Thanks for the sneak peek Mike!

 

[Rosco]

`

 

[mistinthewoods]

Friggin' drool, ..... slobber ....... slobber.
How much longer now?

 

[camprman]

So, I finally got a working Buzz, and now this! I so want one. Oh well, its only money!

 

[Landlord]

nice!!!!!!

 

[Bovinia]

Our betas didn't have the master switch in case anyone is wondering why it wasn't mentioned. I had the new 510 top cap design and it is very nice looking!

 

[RIMP]

In the pics, is that pink thing in the 1st one the wheel?
RIMP

 

[mondotoker760]

Man this thing would look badass with some engraving or etching on it. All the inside wiring to the Buzz is for sure a work of art. Now all Id really want is for it to look less standard and more like a piece of art...Beautiful inside and out. Do you or have you ever thought of offering this engraved?

 

[BuzzKill]

In the pics, is that pink thing in the 1st one the wheel?
RIMP

Yes it is fingernail polish on the wheel to indicate 4.5 volts spot.

 

[BuzzKill]

Man this thing would look badass with some engraving or etching on it. All the inside wiring to the Buzz is for sure a work of art. Now all Id really want is for it to look less standard and more like a piece of art...Beautiful inside and out. Do you or have you ever thought of offering this engraved?

Well you get into CUSTOMS then and that would increase the price by 30-40 % ! , Mist is looking into doing some Veneered ones on a custom basis ( DO NOT quote me on this , he is LOOKING into it ! )

the anodizing could be laser engraved I suppose but with what ?

 

[Ruppy]

Sent you a PM Mike

Sooo you said the old caps would fit the new buzz.... Will the new caps fit the old buzz

 

[BuzzKill]

Sent you a PM Mike

Sooo you said the old caps would fit the new buzz.... Will the new caps fit the old buzz

Man I HOPE SO ! LOL

 

[5cardstud]

Sent you a PM Mike

Sooo you said the old caps would fit the new buzz.... Will the new caps fit the old buzz

If it fits the new it will fit the old. But wouldn't that be called "Old Hat"?

 

[BuzzKill]

Actually these prototypes are a little tight BUT they are made by hand , the production ones will be CNC machined and should be fine.

 

[hairball]

Very nice Mike. Can't wait for them to become available for sale.

 

[Bovinia]

My bottom cap from my original Buzz fits on my beta. I haven't tried the top cap because I can't get the beta top cap off! I think Superman screwed it on LOL

 

[redheadone]

That is really neat looking Boy I would love to have one of thoseLOL

 

[Rosco]

That is really neat looking Boy I would love to have one of thoseLOL

....and they perform better than they look...

 

[RIMP]

....and they perform better than they look...

Want one
RIMP