Cannon Beta Thread

[Switched]

Long weekend, which means it'll be awhile before I lay my hands on my order. If I didn't like the Atty Genius so much I'd propose a vote or petition for him to stay in the workshop packing Cannon and Stealth orders. Fortunately (for him...not us), I love the whole Cannon thought process and think he should take off like the rest of us. (someone grab a camera - this is me being patient and generous in the same doggone day )

Your wish is my command

 

[Switched]

Which atomizers are you speaking of? I am pretty sure the stealth is in reference to the glossy black paint, I know that there are 510 stealth cannons and 901 stealths and only the 901 has a small enough diameter that will fit and you would need to use an adapter and I do not think the res would function properly with an adapter. Someone correct me if I am wrong but the 510 stealth cannons and 510 stainless cannons have a larger diameter than a 510, correct? otherwise you would be able to use a 510 drip tip.

Correct! The canons are the same diameter as an 801. The cannons are the same as the 801 minis with a 510 connection. The atomiser however is not an 801 perse. However the atty is the same as the Ego Megas

 

[atavanhalen]

Your wish is my command

that was funny! lol

 

[rockyroad]

I placed another order for an 801 drip tip to fit my 510 stealth and said what the hell and picked up a 510 to 801 adapter with some fusion cartos. Anyone have any idea when these things will start shipping? (Ike or any of his helpers)

 

[Timothy Cullen]

Lol I should have looked in I didn't know he was taking much deserved break lol sigh I'll just wait patiently for my order

 

[jkoppk]

I got home from work today and found my Ikenvape package in the mailbox.....YES.I'm vaping with the IKV 1.8 ohm 510 cannon now and it is amazing.I just put it on my Grand and started using it right out of the package and the flavor and vapor are great.I don't see how these could get better with time because they are so good now.I think I have found my new atty,oh wait I didn't try the 901 cannon I got yet so we will see.This is a great product.

 

[blindsoup]

I am using the 1.8 ohm 510 stealth atomizer. I picked up 5 of them, but only tried 1 so far. it is leaking so bad like a siv with only 3 drops. has anyone had this issue as of yet I haven't tried the other ones but I will when I get home. thanks for any imput. Edit: , I'm using a mega Ego-T batt. I also picked up 2 3.5ohms, but haven't tried them.

 

[jkoppk]

it is leaking so bad like a siv with only 3 drops. has anyone had this issue as of yet

I just tried one of the stainless 510's and i'm having leaking issues with it.I primed it and got like 1 hit and it went dry so I gave it 3 drops and could see the juice go through to my Grand catch cup.I got a hit or two and dry again,added 3 or 4 drops and same thing again 2 hits and dry.It's like the juice is going right through it for some reason,must be a dud.

 

[blindsoup]

I just tried one of the stainless 510's and i'm having leaking issues with it.I primed it and got like 1 hit and it went dry so I gave it 3 drops and could see the juice go through to my Grand catch cup.I got a hit or two and dry again,added 3 or 4 drops and same thing again 2 hits and dry.It's like the juice is going right through it for some reason,must be a dud.

Exact same thing I am experiencing

 

[Tat_skull]

I've been using my cannons with the same technique as with 901's. I drip 3 drop's and allow it to sit a few minutes before puffing on it, rather than just drip and vape. I noticed that takes care of the dry vape, allowing it to wick properly this way also eliminates over dripping which would be caused by thinking it was dry, when in reality it just hasn't wicked. And when I first primmed, I used 7 drops and let it sit about 10 minutes before puffing on it and adding 3 drops. This has been my findings with a 2.0 stainless and a 3.5 stealth (black). Hope this helps!

 

[rockyroad]

I am using the 1.8 ohm 510 stealth atomizer. I picked up 5 of them, but only tried 1 so far. it is leaking so bad like a siv with only 3 drops. has anyone had this issue as of yet I haven't tried the other ones but I will when I get home. thanks for any imput. Edit: , I'm using a mega Ego-T batt.

I just tried one of the stainless 510's and i'm having leaking issues with it.I primed it and got like 1 hit and it went dry so I gave it 3 drops and could see the juice go through to my Grand catch cup.I got a hit or two and dry again,added 3 or 4 drops and same thing again 2 hits and dry.It's like the juice is going right through it for some reason,must be a dud.

Same here bummer 3.5 and 1.8

 

[blindsoup]

I've been using my cannons with the same technique as with 901's. I drip 3 drop's and allow it to sit a few minutes before puffing on it, rather than just drip and vape. I noticed that takes care of the dry vape, allowing it to wick properly this way also eliminates over dripping which would be caused by thinking it was dry, when in reality it just hasn't wicked. And when I first primmed, I used 7 drops and let it sit about 10 minutes before puffing on it and adding 3 drops. This has been my findings with a 2.0 stainless and a 3.5 stealth (black). Hope this helps!

Thanks, Ill give that shot and report back later

 

[wfarrar33]

Got mine on the way, i was pumped until i read the last few posts. I hope i have better results

 

[blindsoup]

Thanks, Ill give that shot and report back later

Same result...boo - very disappointed. After letting the juice wick for a few minutes, it didn't leak until I started Vaping. I'm going to email Issac and see if he will take back my 6 unused stealth Attys. Way too expensive for me to eat the cost.

 

[wfarrar33]

Same result...boo - very disappointed. After letting the juice wick for a few minutes, it didn't leak until I started Vaping. I'm going to email Issac and see if he will take back my 6 unused stealth Attys. Way too expensive for me to eat the cost.

Is it possible something changed from the ones tested to the ones that were purchased?

 

[Scorched]

I just opened my 510 cannon 3.5ohms and I do not seem to be having any leaking issues. In fact, I primed this atomizer with 18 drops and it soaked it all up no problems. I just started using it so I will have to report back with further use

So far I like it.

 

[Switched]

Is it possible something changed from the ones tested to the ones that were purchased?

Same batch!

 

[Switched]

I am using the 1.8 ohm 510 stealth atomizer. I picked up 5 of them, but only tried 1 so far. it is leaking so bad like a siv with only 3 drops. has anyone had this issue as of yet I haven't tried the other ones but I will when I get home. thanks for any imput. Edit: , I'm using a mega Ego-T batt. I also picked up 2 3.5ohms, but haven't tried them.

I just tried one of the stainless 510's and i'm having leaking issues with it.I primed it and got like 1 hit and it went dry so I gave it 3 drops and could see the juice go through to my Grand catch cup.I got a hit or two and dry again,added 3 or 4 drops and same thing again 2 hits and dry.It's like the juice is going right through it for some reason,must be a dud.

Exact same thing I am experiencing

Same here bummer 3.5 and 1.8

Same result...boo - very disappointed. After letting the juice wick for a few minutes, it didn't leak until I started Vaping. I'm going to email Issac and see if he will take back my 6 unused stealth Attys. Way too expensive for me to eat the cost.

Are we talking apples and oranges here. It seems that there might be some confusion mixed in with this thread. Please help me out here. This is the "Canon" beta thread yet I am also reading 510 stealths. The Canon attys are for all intent and purpose an 801 with a 510 connection.

 

[Switched]

Got mine on the way, i was pumped until i read the last few posts. I hope i have better results

If you are talking about the "canons" you shouldn't have no worries. The stealth 510s on the other hand I have not tried. I have a lengthy comprehensive review coming out on the "canons" 1.8, 2, 2.5 and 3.5 Ohms.

 

[speedemon]

Are we talking apples and oranges here. It seems that there might be some confusion mixed in with this thread. Please help me out here. This is the "Canon" beta thread yet I am also reading 510 stealths. The Canon attys are for all intent and purpose an 801 with a 510 connection.

I do beleive they are talking about all cannons i got mine yesterday cannon stealth (black),cannon stainless (stainless) they are both cannon diff. colors they are the 801 with 510 thread.I was worried to try affter reading here.The 1st one i'm using a stainless cannon working great!There might be some bad ones floating around nothing is perfect always gonna be lemons!