Cart Mod Issues HELP!!!

[AfterGlow]

I apologize if you have read this somewhere else. I haven't posted it in too many places but I wanted to get it out there so I can find a solution.

I have been running the ADM mod for awhile now and it works great. I use a standard Ego with 510 atty, with the ADM 510 mod and blue foam on top. I recently tried a new juice vendor, I really enjoy the juice and consistency, however when my filler runs dry the liquid does not re-absorb and I get a burnt taste, even though there is a full cart of liquid below it. Any ideas why? The new juice is FSUSA and is fairly thin in comparison to other liquids I have tried so I can't figure out why or how to fix it. Any ideas???

 

[k3vin]

2 things I have noticed..sometimes with the spring,you will get a bubble of air in it,the spring actually seems to stop the flow..when it stops hitting,pull out the plug and see if that it,if fo,just tap on the bottom of batt with cart on and should flow again..if not..Trim a little at a time from the top of plug which is inside the cart..

 

[AfterGlow]

2 things I have noticed..sometimes with the spring,you will get a bubble of air in it,the spring actually seems to stop the flow..when it stops hitting,pull out the plug and see if that it,if fo,just tap on the bottom of batt with cart on and should flow again..if not..Trim a little at a time from the top of plug which is inside the cart..

Thank you for responding! I have posted this issue in a bunch of different threads and your the only one that has had any real insight. I will try these.