Catfish Atty Mods the next Chapter

[TheDigital99]

Chowder. I have a derringer from run #2... Is it possible to put the knurled pin into it?

 

[Wolfenstark]

18650 CAM Mech Squonker

1. 73neb
2. Graywolf1911
3. Houndb
4. Magaro
5. hildicat
6. Nautilusfan
7. Papa_Lazarou
8. Lutses
9. Magnetnerd
10. TheDigital99

Backup

11. yinsen
12. snakedoc
13. Robbieblood
14. IonMan
15. distortoblotto
16. petemoss
17. B2L
18. Raynman
19. 2buildawall
20. JeffreyAce
21. Rex Everything
22. Chadshaw
23. Loopy 1224
24. spacelord
25. cd68
26 Subohmies
27. pwheeler
28. calpis
29. bullhcr
30. Slappy3139
31. kiloyst
32. Havok333
33. rudedog
34. Walter Ego
35. Daigoman
36. SeanMoore
37. Clark F
38. Raynman
39. Kentastic
40. supersport13
41. EZinTN
42. Houndb
43. Wolfenstark

 

[inswva]

This pic shows why I'm not super excited about the Radius. Look how big and low the air slot is. I will gladly do send ins of the Radius (authentic only) but I'm just not feeling it for a bottom fed application.

No problem. If I wrangle one up, I'll send it to you.

 

[mommabird62]

Chowder. I have a derringer from run #2... Is it possible to put the knurled pin into it?

Have been thinking the same. I have one from the first run that I love. The pin isn't spinning yet, but was wondering if it may in the future. Thoughts CH?


Sent from my iPhone using Tapatalk with my paws

Mommabird62

 

[RSZ1]

What is the status on the Vector? I'm in the 70's on the list just curious if those are shipping out yet or still waiting.

 

[inswva]

Another cheap shorty... the Infinite CLT V3 Mini. Looks like it has the anti-spit back colander ala the Bonsai and a 510 drip tip adapter along with a couple of chuff tops. Slotted posts, too. Likely not a flavor chaser atty but I bet it'll toss some fog.

 

[Sloth Tonight]

I must agree with your observation - nothing has touched the Derringer in the flavor department for me either. A close second is the Rogue...

Can't come close to getting the Vector to produce flavor remotely close. AFC is amazing on it though

Still need a Bambino as that might be close, most say no but I like the design with a bone color cap.

Stumpy also incoming once they are ready and excited about this one.

I think taste in attys is literally as subjective as taste in juice itself. I would equate a rogue to an odin - horrid flavor. Way way behind a d. And while the D is my top for flavor thus far the vectors hanging right there with it. Leagues beyond the rogue.

I find it fascinating and wonderful but it does make finding that perfect atty a true hunt for each of us.

Eta funny enough my favorite vector build so far is both higher in ohms than I'm used to (.5) and also further away from the airholes than I'm used to. 8 wraps of 26g, 2.5mm. One of the best vapes I've ever had

 

[RickCain]

I think taste in attys is literally as subjective as taste in juice itself. I would equate a rogue to an odin - horrid flavor. Way way behind a d. And while the D is my top for flavor thus far the vectors hanging right there with it. Leagues beyond the rogue.

I find it fascinating and wonderful but it does make finding that perfect atty a true hunt for each of us.

Eta funny enough my favorite vector build so far is both higher in ohms than I'm used to (.5) and also further away from the airholes than I'm used to. 8 wraps of 26g, 2.5mm. One of the best vapes I've ever had

It always amazes me how there are so many variables that go into a persons "perfect vape". What works for one hardly ever works for all.

Do you mind posting a pic of the build that works so well on your Vector? I love how it looks on my Tmod and am willing to try anything new to see if it starts to work for me. Twisted vertical was the closest I've come to a dense. flavorful vape with it.


Sent from my iPhone 6+ using Tapatalk

 

[inswva]

I haven't rebuilt my Vector yet but popping the stupid screen out really woke it up. Still not bringing massive flavor but I have hope for it. It better get it's .... together now that I have a fifth Derringer inbound and the Stumpy not far behind it.

 

[Sloth Tonight]

It always amazes me how there are so many variables that go into a persons "perfect vape". What works for one hardly ever works for all.

Do you mind posting a pic of the build that works so well on your Vector? I love how it looks on my Tmod and am willing to try anything new to see if it starts to work for me. Twisted vertical was the closest I've come to a dense. flavorful vape with it.


Sent from my iPhone 6+ using Tapatalk

Sure - if you're a full on flavor chaser though this won't appease you. I am enjoying this build because of its smoothness. It has good flavor for me but I've only tried it on one juice so far - the cure - and I really enjoy it. Not the full mouth flavor per se that I'm used to, this particular build. But I haven't felt a need to rebuild yet. Zero spit back, perfectly smooth I'm used to warmer - lower ohms - but I felt frisky and I like it

 

[Sloth Tonight]

Personally I think one of the tricks to the vector is relatively large coils, which is why I went to 2.5 mm 8 wrap 26g and want to experiment with twisted wire soon to that effect - also, lining the coils so they sit just behind the air holes, not directly under them.

Just my 2 cents so far. The experimentation has only just begun and ad always YMMV

This stuff is fun. Cigs were so boring in retrospect.

 

[Asbestos4004]

18650 CAM Mech Squonker

1. 73neb
2. Graywolf1911
3. Houndb
4. MFToms59
5. Magaro
6. hildicat
7. Nautilusfan
8. Papa_Lazarou
9. Lutses
10. Magnetnerd

Backup

11. TheDigital99
12. yinsen
13. snakedoc
14. Robbieblood
15. IonMan
16. distortoblotto
17. petemoss
18. B2L
19. Raynman
20. 2buildawall
21. JeffreyAce
22. Rex Everything
23. Chadshaw
24. Loopy 1224
25. spacelord
26. cd68
27 Subohmies
28. pwheeler
29. calpis
30. bullhcr
31. Slappy3139
32. kiloyst
33. Havok333
34. rudedog
35. Walter Ego
36. Daigoman
37. SeanMoore
38. Clark F
39. Raynman
40. Kentastic
41. supersport13
42. EZinTN
43. Houndb

A whole bunch of us seemed to have been bumped off this list. I was #50, I think, at some point. What happened?

 

[Loopy1224]

Hi All. I just got back from a vacation that did not include internet access and I went all the way back to page 82 and can't find the Stumpy list. If I'm not too late would someone be kind enough to put me on it? Thanks

 

[RiverNut]

Totally different animals... If you are all about the flavor chase the manta is your pony... If you like clouds but want to dial back for 7/10 taste the Vector is your pony. Personally I'm all over the Vector. The manta is nice but if I'm going that far down the flavor rabbit hole I go all in with the Nectar Micro.

ETA on the Nectars? Still waiting on an invoice from Chad.

feel like a dying breed here...so few MTL flavor attys compared to the big air/clouds. Pretty sure the Nectar will be the 22mm atty I've been searching for.

 

[Alawot]

Personally I think one of the tricks to the vector is relatively large coils, which is why I went to 2.5 mm 8 wrap 26g and want to experiment with twisted wire soon to that effect - also, lining the coils so they sit just behind the air holes, not directly under them.

Just my 2 cents so far. The experimentation has only just begun and ad always YMMV

This stuff is fun. Cigs were so boring in retrospect.

Considering this was designed as a dripper, you might be on to something with moving the coils in to where they would be more accessible when you pop the tip off. Then you wouldn't be bringing the air directly down on the coils, but more from the side and maybe some curling down under the coils as well.

 

[inswva]

Hi All. I just got back from a vacation that did not include internet access and I went all the way back to page 82 and can't find the Stumpy list. If I'm not too late would someone be kind enough to put me on it? Thanks

I'm reasonably sure this is the latest - it was on pg 79.

Element Mods "Stumpy" Authentic ($107 +6)
1. LittleBird (black delrin)
2. Harleyndn (black)
3. inspects (white teflon DT)
4. saku808
5. Asbestos4004 (white teflon dt)
6. d4gger
7. Mommabird62
8. Papa_Lazarou
9. MFToms59-Black Derlin DT
10.AllPepperS
11.distortoblotto ( black Derlin DT)
12. spacelord (black delrin)
13. dirfm (black)
14. inswva (white teflon)
15. Rickcain (Black DT)
16. MadOzodi (black delrin)
17. Loopy1224

 

[Chowderhead1972]

Who is sending in one of those Hatsur rda's ?
Same address as on the packages you send Tom ?

Yes. Same address.

 

[Chowderhead1972]

Chowder. I have a derringer from run #2... Is it possible to put the knurled pin into it?

That should have my threaded pin and the stock pin should be in the spares kit. If you still have the stock pin I can do it as long as it's the ss pin.

 

[Chowderhead1972]

All of you guys looking for tight draw and flavor you NEED one of these. I have done 20 of them for my FaceBook peeps and I have mastered the rather unorthodox method of bottom feeding these. I have people asking daily for these on Facebook.

I am starting another monster run of these on Facebook but I will make it accesable to ecf as well. Hildicat this Buds for you!

I swear on my life the Nectar Micro and JazzyBoba will change your life!

 

[MadOzodi]

All of you guys looking for tight draw and flavor you NEED one of these. I have done 20 of them for my FaceBook peeps and I have mastered the rather unorthodox method of bottom feeding these. I have people asking daily for these on Facebook.
View attachment 464565
I am starting another monster run of these on Facebook but I will make it accesable to ecf as well. Hildicat this Buds for you!

I swear on my life the Nectar Micro and JazzyBoba will change your life!

What is it that I'm looking at? The atomizer or the whole shebang?