Catfish Atty Mods the next Chapter

Status
Not open for further replies.

inspects

Squonkamaniac
ECF Veteran
Verified Member
Dec 15, 2014
4,455
10,798
Arizona, Ecuador
I got a rake to go with the 2 demos I think I will try it.

Btw the flapjack is a go. I should have them with the next batch in about 2 weeks.

Also btw: the flappy with the air wide open in dual coil is about 15% more open than the NarDa or about equal to the stumpy at 1 1/2 holes on either side. If you are looking for clouds this might not be the best fit but if you are looking for something right in the middle of a NarDa and a stumpy with a unique deck this will be a crowd pleaser. I need to wire up my 2 cam-r bodies first but hope to coil the flappy right after.

Btw the Stumpy invoices should be out tonight.

Sounds like my kinda atty....!
 
  • Like
Reactions: rudedog

jhhollier

Ultra Member
ECF Veteran
Verified Member
Dec 3, 2014
2,322
5,303
im thinkin ill be spendin some more on another atty...lol.
When inswva posted about it in the rda forum and I found out it costs $120 I tuned out. It looked intriguing but I'm getting tired of spending a lot on attys when I can find stuff like the Nuevo or Griffin or Ohmega Alpha BFT for under $50 and they vape amazingly well. But the more I read up about it the more my attitude changed to "Weeellll... ONE more expensive atty won't kill ya, will it?"
 

inspects

Squonkamaniac
ECF Veteran
Verified Member
Dec 15, 2014
4,455
10,798
Arizona, Ecuador
When inswva posted about it in the rda forum and I found out it costs $120 I tuned out. It looked intriguing but I'm getting tired of spending a lot on attys when I can find stuff like the Nuevo or Griffin or Ohmega Alpha BFT for under $50 and they vape amazingly well. But the more I read up about it the more my attitude changed to "Weeellll... ONE more expensive atty won't kill ya, will it?"

lmao.......:lol:
 
  • Like
Reactions: pwheeler

m3th1dz

In way over his head
ECF Veteran
Verified Member
Feb 9, 2015
208
1,205
Philadelphia
I got a rake to go with the 2 demos I think I will try it.

Btw the flapjack is a go. I should have them with the next batch in about 2 weeks.

Also btw: the flappy with the air wide open in dual coil is about 15% more open than the NarDa or about equal to the stumpy at 1 1/2 holes on either side. If you are looking for clouds this might not be the best fit but if you are looking for something right in the middle of a NarDa and a stumpy with a unique deck this will be a crowd pleaser. I need to wire up my 2 cam-r bodies first but hope to coil the flappy right after.

Btw the Stumpy invoices should be out tonight.
Received the invoice from Chad. Do I need to email you when the payment is made so that you know to send it direct instead of to Chad first?

Sorry if I'm being a pta but I really hate the post office
 

inswva

Do you even squonk, bro?
ECF Veteran
Verified Member
Jul 19, 2014
4,728
18,512
I got a rake to go with the 2 demos I think I will try it.

Btw the flapjack is a go. I should have them with the next batch in about 2 weeks.

Also btw: the flappy with the air wide open in dual coil is about 15% more open than the NarDa or about equal to the stumpy at 1 1/2 holes on either side. If you are looking for clouds this might not be the best fit but if you are looking for something right in the middle of a NarDa and a stumpy with a unique deck this will be a crowd pleaser. I need to wire up my 2 cam-r bodies first but hope to coil the flappy right after.

Btw the Stumpy invoices should be out tonight.

I received my coil jig a few days ago but haven't had time to mess with it. Looking forward to reading your build experience with it.

edit: I've only run two builds so far. The single clapton build was a flavor monster but had some pretty severe spit back. The dual coil build doesn't have nearly the flavor but works reasonably well. The nice thing about this atty is the almost endless build possibilities.

GQ1tvEA.jpg


tvfgN9Z.jpg
 

TheDigital99

Super Member
ECF Veteran
Verified Member
Dec 9, 2012
718
1,616
New Hampshire, United States
I received my coil jig a few days ago but haven't had time to mess with it. Looking forward to reading your build experience with it.

edit: I've only run two builds so far. The single clapton build was a flavor monster but had some pretty severe spit back. The dual coil build doesn't have nearly the flavor but works reasonably well. The nice thing about this atty is the almost endless build possibilities.

GQ1tvEA.jpg


tvfgN9Z.jpg
Try building a single off to one side.. I had success with that... I am waiting for my jig to come, so I can give It a try
 

penguiness

Vaping Master
ECF Veteran
Verified Member
Mar 27, 2014
5,649
33,184
Nashville, TN, USA
I received my coil jig a few days ago but haven't had time to mess with it. Looking forward to reading your build experience with it.

edit: I've only run two builds so far. The single clapton build was a flavor monster but had some pretty severe spit back. The dual coil build doesn't have nearly the flavor but works reasonably well. The nice thing about this atty is the almost endless build possibilities.

GQ1tvEA.jpg


tvfgN9Z.jpg


Tilt those coils and you will see a world of difference. Regardless if twisted or single strand, single or dual coil:

10414543_10153891846236449_4795979885241527703_n.jpg
 

inswva

Do you even squonk, bro?
ECF Veteran
Verified Member
Jul 19, 2014
4,728
18,512
Tilt those coils and you will see a world of difference. Regardless if twisted or single strand, single or dual coil:

10414543_10153891846236449_4795979885241527703_n.jpg

Took your advice and just did a quick rebuild. Dual twisted 28ga @ 0.28Ω, tilted.

pUd4aH6.jpg


ZeE6wVp.jpg


It fires fast and makes great flavor and vapor production. Good thing my officemate took an early lunch, lol.

 

m3th1dz

In way over his head
ECF Veteran
Verified Member
Feb 9, 2015
208
1,205
Philadelphia
Took your advice and just did a quick rebuild. Dual twisted 28ga @ 0.28Ω, tilted.

pUd4aH6.jpg


ZeE6wVp.jpg


It fires fast and makes great flavor and vapor production. Good thing my officemate took an early lunch, lol.


I have mine built the same way except I have two individual wicks instead of one continuous through both coils
 

Nautilusfan

Vaping Master
ECF Veteran
Verified Member
Took your advice and just did a quick rebuild. Dual twisted 28ga @ 0.28Ω, tilted.

pUd4aH6.jpg


ZeE6wVp.jpg


It fires fast and makes great flavor and vapor production. Good thing my officemate took an early lunch, lol.


What button is that? Thought it was ultem....but not sure;)
 

Sloth Tonight

CF Moderator
ECF Veteran
Verified Member
Jun 25, 2014
7,879
51,681
NY
You guys are killing me with this atty, I must resist and be a good boy no more toys for a month. Ok maybe a week [emoji56]
I know. Here I am enjoying my newfound contentedness with Stumpys and now I find myself wanting waffles. I never want waffles...what the f is going on...
 
Status
Not open for further replies.

Users who are viewing this thread