Catfish Atty Mods the next Chapter

[beez0527]

So 2x 3mm air is still tight?

It didn't look that big in the pic when I expanded it looks better. Thought it was just a small one now I see it is bigger than I 1st Thought.

Sent from my SM-P600 using Tapatalk

 

[Papa_Lazarou]

So 2x 3mm air is still tight?

Haven't measured the holes on mine to know if these are larger, but yeah, it's a bit constricted. Might be the stumpies spoiling me.

 

[Chowderhead1972]

Haven't measured the holes on mine to know if these are larger, but yeah, it's a bit constricted. Might be the stumpies spoiling me.

Have you tried removing the restrictor bushings completely? The UN bushed holes are tapped for m3 with bushings that step it down to 1.5 or 2mm I believe. Dual 1.5 would be very tight but dual 3mm won't be a cloud blower by any stretch but wide open should be in the same neighborhood as the Narda.

As to the stumpy that's 6x 3mm holes so I'm sure it's vastly different.

 

[rudedog]

so your unsure if the LBC is going to be made then?well if thats true im glad my lil pinch sale didnt go through.sucks Tom hate to hear your gettin screwed.but thats capitalism at its finest i guess.screw b4 getting screwed.the whle narda thing sucked...period...my opinion anyways.

 

[distortoblotto]

Capitalism ; Get rich first and you can always afford to become honest later.

 

[rudedog]

Capitalism ; Get rich first and you can always afford to become honest later.

sad but true for sure and most NEVER get honest!

 

[snakedoc]

so your unsure if the LBC is going to be made then?well if thats true im glad my lil pinch sale didnt go through.sucks Tom hate to hear your gettin screwed.but thats capitalism at its finest i guess.screw b4 getting screwed.the whle narda thing sucked...period...my opinion anyways.

Say it ain't so Tom. The LBC must make it to market. After such a long and arduous gestation; you must birth that ..... I for one am willing to pay in advance.

 

[distortoblotto]

Say it ain't so Tom. The LBC must make it to market. After such a long and arduous gestation; you must birth that ..... I for one am willing to pay in advance.

I agree... I know it's not the path you wish to take, but if it has to be done to bring the LBC to fruition than so be it. It's a much better alternative than seeing the dream die.

 

[Tamer El-Meehy]

The good thing is that you have sufficient flexibility to change course, and a loyal customer base to support you. If the Kanger move is any indication, the market is going to be more aggressive and much more price sensitive in the not so distant future. Facing such a development I am sure you realize that small entrepreneurs can't compete in a price market. The best strategy small businesses follow is to target niche markets relying on providing high value to their loyal small client base. But to do this you must focus on your own creations. Of course the threat here is that these creations will face the threat of being cloned after the first signs of success. This means that you have to be continuously on the run; moving from one project to the next as soon as the cloning starts


Sent from my iPhone using Tapatalk

 

[Tamer El-Meehy]

BTW anybody in here tried Le Magister and the Snapdragon? They are supposed to be great flavor atties and they have been cloned too.


Sent from my iPhone using Tapatalk

 

[inspects]

BTW anybody in here tried Le Magister and the Snapdragon? They are supposed to be great flavor atties and they have been cloned too.


Sent from my iPhone using Tapatalk

Tamer..I have a Snapdragon from Tom, I like it, but I wouldn't buy two.

I have pairs of...or several of the same attys, like the Stumpy Manta NarDa, I like them more, so their on various squonkers with different juice.

But...everyone's taste is different...you may want a half dozen Snapdragons...

 

[inspects]

so your unsure if the LBC is going to be made then?well if thats true im glad my lil pinch sale didnt go through.sucks Tom hate to hear your gettin screwed.but thats capitalism at its finest i guess.screw b4 getting screwed.the whle narda thing sucked...period...my opinion anyways.

I thought Tom was talking about Attys...no?

 

[Tamer El-Meehy]

Tamer..I have a Snapdragon from Tom, I like it, but I wouldn't buy two.

I have pairs of...or several of the same attys, like the Stumpy Manta NarDa, I like them more, so their on various squonkers with different juice.

But...everyone's taste is different...you may want a half dozen Snapdragons...

I used to be a big fan of the Rose. So if it's anything like it in the flavor department I think it would suit me fine. Unlike most people I like the restricted MTL draw.


Sent from my iPhone using Tapatalk

 

[Tamer El-Meehy]

I thought Tom was talking about Attys...no?

Apparently he's considering the LBC too. He mentioned this a few pages back


Sent from my iPhone using Tapatalk

 

[Tamer El-Meehy]

Tamer..I have a Snapdragon from Tom, I like it, but I wouldn't buy two.

I have pairs of...or several of the same attys, like the Stumpy Manta NarDa, I like them more, so their on various squonkers with different juice.

But...everyone's taste is different...you may want a half dozen Snapdragons...

Inspects, what's your take on the snapdragon?


Sent from my iPhone using Tapatalk

 

[Papa_Lazarou]

Have you tried removing the restrictor bushings completely? The UN bushed holes are tapped for m3 with bushings that step it down to 1.5 or 2mm I believe. Dual 1.5 would be very tight but dual 3mm won't be a cloud blower by any stretch but wide open should be in the same neighborhood as the Narda.

As to the stumpy that's 6x 3mm holes so I'm sure it's vastly different.

It's definitely the bushings that are part of the restriction with my atty. I didn't think to remove them myself as they looked to be tapped (not inserted) into the cap hole walls to these middle aged eyes. You've given me an idea. I should think it would, indeed, put it on par with the narda, which would suit me just fine.

 

[Papa_Lazarou]

BTW anybody in here tried Le Magister and the Snapdragon? They are supposed to be great flavor atties and they have been cloned too.

I have 2 snappies. I like them for flavour and easy build results. Air is good for restricted DL drawing.

I also prefer the clear bell caps with them to the stock caps. It might be mostly a psychological thing as I'm not a fan of how tall the stock setup is, but I'd say I get better flavour.

 

[Sloth Tonight]

Those of you using spaced coils, do you notice more spitback? I'm getting spitback on my spaced center stumpy builds

 

[Gigdujour]

Those of you using spaced coils, do you notice more spitback? I'm getting spitback on my spaced center stumpy builds

I definitely get a lotta poppin' going on with my overhead Mundy coils.



Master of Bassets...and not much else

 

[inspects]

Those of you using spaced coils, do you notice more spitback? I'm getting spitback on my spaced center stumpy builds

I don't Sloth, but I have .8 ohm coils in the Stumpy's at the moment...when I had lower ohm coils it would spit like hell, especially with twisted wire....but I didn't try different builds, I just went with higher ohms, less power. Not enough time for experiments...I go with what works and leave it at that....