Catfish Atty Mods the next Chapter

[inswva]

Bringing this forward so it doesn't get lost in the shuffle. We need 15 buyers.

Radius rda list

1. inswva
2. inspects
3. Papa_Lazarou
4. BENTHOS
5. distortoblotto

 

[d4gger]

I'll spring.
Radius rda list

1. inswva
2. inspects
3. Papa_Lazarou
4. BENTHOS
5. distortoblotto
6. d4gger

 

[distortoblotto]

This hazelnut milking.. More info is required. What is the process? Where do you get the required nuts? Does it make coffee as amazing as it sounds?

And I'm trying to get him to teach me how

It's fairly easy but, you'll need a nut milk bag.

How to Make Your Own Homemade Nut Milk | Anton Health and Nutrition

 

[Sloth Tonight]

As Distorto says one of the key points to making good nut milk is to use a nut milk bag. It enables you to fully squeeze every last driplet of milk out of said nuts. You can then reuse the pulverized nut meat in granola etc.

One soaks their nuts for a few hours then blends their nuts into water. Add a little maple syrup or sugar etc for sweetening to taste. Sometimes I add melted chocolate chips along with some chocolate truffle flavoring I got for diy eliquid. I make the greatest chocolate nut milk on the planet.

Yes, homemade hazelnut milk makes coffee as good as it sounds. I buy my nuts in bulk from Oregon, 10lbs or more at a time, to drop the price down to around 8 bucks per pound. It's the only way to roll for a sloth with a nutmilk addiction.

Obviously the more common thing is almond milk - but I'm telling you, hazelnut is where it's at.

 

[Nautilusfan]

Easy guys... I have kicked around the idea of quitting my job to do this full time and if I were 10-15years younger I probably would. I have quit jobs for way worse reasons. I do think about it but if I did I would go all the way. Do,the whole west coast bit, sponge of some of the awesome friends (Suppliers, modders, overall movers and shakers of the ecig world)that I have made to elbow my way to a seat at the big boy table. The problem is I like my job and I have a pension that will make my life much easier when I throw in the towel.

That said I do have an issue with moderation. I'm either all in or all out. Luckily other than cheeseburgers and rib eyes I don't have any chemical dependencies. My weakness is mechanical shiny things, cars, trucks, tools, knives, attys etc. I obsess and never compromise. Who knew these attributes would lead me here. This has become my life I wake up to emails, PMs, Facebook messages, text messages; all looking for this atty or that atty, I fall asleep the same way. I'm married to my iPad, I'm never more than ten feet away from it. It has gotten to the point where I have to isolate myself from it to get my normal 3hrs a day of sleep or het anything done, it used to be I got 5-10 emails,PMs a day now it's over 100 a day. Bare with me, I will get to you. I spend a minimum of 10 hrs a day answering questions trying to be better at this than the next guy. Most of the time I succeed sometimes I don't.

As to the comment about the big companies putting me out of business it would never happen and this is why: me doing what I do saves them from needing to stock and sell another item and risk getting stuck with a ton of unsellable stock. I am also a valuable research tool that costs them nothing and actually pays them. Look at Avid, look at Praxis, look at vapor Lair, look at Hobo; none of them had any interest in a bottom fed atty or mod. Now all of them have something in production or planning for the bottom feeder. I have consulted in one way or another on 3 out of 4 of these devices. I know your thinking that's the end of catfish when all of them release their own bottom feeders. As that day approaches I have already shifted gears to sell their bottom fed attys but with my situation I can still buy wholesale and at that point I can sell for less because my overhead is low. Plus it gives me the chance to improve upon their failures. I will sell the Derringer2 when it comes out and there will be a bottom fed version. I have yet to find an atty that I can't improve upon and as long as there are people like you and I that want the cutting edge perfected I will be here. Name one factory bottom fed atty that is perfect. Until you come up with an answer that I can't rebut I will be here and I will flourish. I have mad ninja skills and the knowledge and focus to keep myself and Catfish alive, when something doesn't work I go a different direction.

Currently I'm trying to find better and more reasonably priced authentics instead of pumping out clone after clone. I will still do clones for my ECF family but not in the numbers I once have. I would love to do three clone runs and we decide which of them is authentic worthy, much like I have done with the Manta2. 2 runs of clones to evaluate the concept and if it's a winner go straight to the authentic run... Well now I'm rambling and about to pass out...

Great read Tom! "Mad ninja skills" Love it man!

 

[mommabird62]

You guys are pervs I am referring to hazelnut milk for mah coffee

LOL I wasn't going there....I figured the rest would do it for me [emoji12] I even googled it.

Anyhooo....sounds great for a coffee nut like me. No pun intended.


Sent from my iPhone using Tapatalk with my paws

Mommabird62

 

[inswva]

I was feeling left out...

Vector RDA list

1. TheDigital99
2. Loopy1224
3. lutses
4. Robbieblood
5. Rule62
6. rudedog
7. AllPepperS
8. Chadshaw
9. Calpis
10.TheDigital99 (2nd)
11. Robbieblood (2nd)
12. Tbev
13. jhhollier
14. BENTHOS
15. distortoblotto
16. d4gger
17. Magaro
18. Rex Everything
19. Tbev (2nd)
20. fairtradesloth
21. fairtradesloth (2nd)
22. YePsTeR
23. Kingdal
24. Nautilusfan
25. Inspects
26. s_X_d
27. Wolfenstark
28. Papa_Lazarou
29. Papa_Lazarou (2nd)
30. tw33k
31. Wharfrat1976
32. pwheeler
33. petemoss
34. bullhcr
35. kiloyst
36. Alexander Mundy
37. Mantis4343
38. Magnetnerd
39. puffon
40. supersport13
41.TEEJUICE
42. inswva

 

[super_X_drifter]

Vector RDA list

1. TheDigital99
2. Loopy1224
3. lutses
4. Robbieblood
5. Rule62
6. rudedog
7. AllPepperS
8. Chadshaw
9. Calpis
10.TheDigital99 (2nd)
11. Robbieblood (2nd)
12. Tbev
13. jhhollier
14. BENTHOS
15. distortoblotto
16. d4gger
17. Magaro
18. Rex Everything
19. Tbev (2nd)
20. fairtradesloth
21. fairtradesloth (2nd)
22. YePsTeR
23. Kingdal
24. Nautilusfan
25. Inspects
26. s_X_d
27. Wolfenstark
28. Papa_Lazarou
29. Papa_Lazarou (2nd)
30. tw33k
31. Wharfrat1976
32. pwheeler
33. petemoss
34. bullhcr
35. kiloyst
36. Alexander Mundy
37. Mantis4343
38. Magnetnerd
39. puffon
40. supersport13
41.TEEJUICE
42. inswva
43. s_X_d
44. s_X_d

 

[super_X_drifter]

Just got the vector. All it took was opening the box and admire this biatch to immediately order 2 more.

I will do a build vid on it tonight and hopefully even get it on YouTube tonight.

Thank you Tom

Now I got a car to finish washing

 

[Sloth Tonight]

Just got the vector. All it took was opening the box and admire this biatch to immediately order 2 more.

I will do a build vid on it tonight and hopefully even get it on YouTube tonight.

Thank you Tom

Now I got a car to finish washing

Well, that takes away any second guessing I was doing on getting two of them. LOL now I'm struggling to just get 2 you rat!

 

[Alawot]

Just got the vector. All it took was opening the box and admire this biatch to immediately order 2 more.

Well, that takes away any second guessing I was doing on getting two of them. LOL now I'm struggling to just get 2 you rat!

I hear ya Sloth, trying to stay strong. Must let vape budget recover.

 

[SeanMoore]

I hear ya Sloth, trying to stay strong. Must let vape budget recover.

I could blow a savings account on vape stuff this year (2015, year of SQUONK!) I blame pdib for making the sumpin'... I still don't own one but I do have some mod envy over them. Had it not been for pdib's stuff roping me back into ECF I'd have found CAM later through word-of-mouth on reddit, wouldn't have a PEKO in hand, three DNA chips to temp-control my ZNA + make a couple gDNAs... once I buy a soldering station and learn to solder and then and then and then.

Silly hobbiests.

 

[super_X_drifter]

Without even vaping the Vector I can say that it looks like it will displace EVERY other atomizer I have currently.
I like top air. Really like the extreme pocketability, textability, just plain old lifeability not having side air offers.

That said, this atty looks robust as hell, my mother could build it (the post ovals are like 3/32" diameter) and aesthetically among the best.

I'd be vaping it right now if it weren't for the movie I am gonna shoot on it tonight. But I can tell ya, it don't need a tutorial. Like I said, my 74 year old mother could build this atty without corrective vision.

These guys must be thinking "what the F were we thinking when we made the LSM?"

This atty is the polar opposite.

I see my last Nuppin, derringer, hellboy and Rogue getting cleaned up and ready for quick sale

 

[RobbieVape]

Without even vaping the Vector I can say that it looks like it will displace EVERY other atomizer I have currently.
I like top air. Really like the extreme pocketability, textability, just plain old lifeability not having side air offers.

That said, this atty looks robust as hell, my mother could build it (the post ovals are like 3/32" diameter) and aesthetically among the best.

I'd be vaping it right now if it weren't for the movie I am gonna shoot on it tonight. But I can tell ya, it don't need a tutorial. Like I said, my 74 year old mother could build this atty without corrective vision.

These guys must be thinking "what the F were we thinking when we made the LSM?"

This atty is the polar opposite.

I see my last Nuppin, derringer, hellboy and Rogue getting cleaned up and ready for quick sale

Glad im down for a couple, if it can replace my REMatty and Marquis then it must be a beast. I'm a top atty guy myself, looks right up my alley. How small is the chamber, is it reduced / domed at the top



Sent from my iPhone using Tapatalk

 

[inspects]

Without even vaping the Vector I can say that it looks like it will displace EVERY other atomizer I have currently.
I like top air. Really like the extreme pocketability, textability, just plain old lifeability not having side air offers.

That said, this atty looks robust as hell, my mother could build it (the post ovals are like 3/32" diameter) and aesthetically among the best.

I'd be vaping it right now if it weren't for the movie I am gonna shoot on it tonight. But I can tell ya, it don't need a tutorial. Like I said, my 74 year old mother could build this atty without corrective vision.

These guys must be thinking "what the F were we thinking when we made the LSM?"

This atty is the polar opposite.

I see my last Nuppin, derringer, hellboy and Rogue getting cleaned up and ready for quick sale

SXD....looking forward to your review....!!!

 

[Joules_Verne]

Plankton.

Zooplankton back to you

 

[super_X_drifter]

There, now that that's finished

We can go get some Starbucks

Now, Back to your regularly scheduled program.

 

[supersport13]

View attachment 462025 There, now that that's finished

We can go get some Starbucks

Now, Back to your regularly scheduled program.

Lookin' sweet Russ!!!

 

[Sloth Tonight]

You're killing me Russ. I don't know how to hold back from 3 or 4 now...*thinking*

 

[Sloth Tonight]

No I'm going to hold off...2 is enough...2 more next paycheck if they're still around...and I like them...yeah, 'atta Sloth.

.................................................................................