Catfish Atty Mods the next Chapter

[inswva]

I will have an invoice for 50 more vectors tomorrow and I will pay it Monday morning. You guys can never say I didn't do my best to supply the demand.

I don't have a free mod to put my Vector on so if any of you peeps past #60 on the list want my spot in the first run just swap our names on the list. I'm in no hurry.

@inspects @Sweepea @Alawot

 

[jotuck]

I grabbed a derringer from Tom the and received it the other day. Works great on tmod want to try it on another, is the bottom pin adjustable? don't need to adjust it to much just a couple turns.

 

[Spyke180]

Thanks for the atty's!
The Derringer is a beast!

 

[LittleBird]

List for AUTHENTIC Marquis. ($160)
These will be paid for Friday and hopefully shipped to me on Monday. These should be available for release next Friday.

1. Robbieblood
2. inspects
3. slappy3139
4. TealStreetHooligan
5. distortoblotto
6. James1980
7. Strongdad
8. Travisbass
9. Travisbass
10. LittleBird
11. SeanMoore
12. holyseano
13. RickCain
14. Inspects
15. Plumeguy
16. Eric Snyder

Tom, is there a new date for these? Just wonderin' if I should choose something else in the interim for the poor, topless mod who is waiting...

 

[kingdal]

Hey Tom, just got my hands on a Vertex Jr. I'm no expert, but it looks to me like this is perfect for bottom feeding. Any plans for a BF Vertex Jr?

 

[super_X_drifter]

P

How wide is the Vector?

Pauly, it's 22mm bro

 

[NatGasMan]

Vector rda $70+$6 shipping Paypal FF

1. TheDigital99
2. Loopy1224
3. lutses
4. Robbieblood
5. Rule62
6. rudedog
7. AllPepperS
8. Chadshaw
9. Calpis
10.TheDigital99 (2nd)
11. Robbieblood (2nd)
12. Tbev
13. jhhollier
14. BENTHOS
15. distortoblotto
16. d4gger
17. Magaro
18. Rex Everything
19. Tbev (2nd)
20. fairtradesloth
21. fairtradesloth (2nd)
22. YePsTeR
23. Kingdal
24. Nautilusfan
25. Inspects
26. s_X_d
27. Wolfenstark
28. Papa_Lazarou
29. Papa_Lazarou (2nd)
30. tw33k
31. Wharfrat1976
32. pwheeler
33. petemoss
34. bullhcr
35. kiloyst
36. Alexander Mundy
37. Mantis4343
38. Magnetnerd
39. puffon
40. supersport13
41.TEEJUICE
42. NatGasMan
43. s_X_d
44. s_X_d
45.Motabrownie
46. cd68
47. distortoblotto (#2)
48. johnnyseeandoh
49. Asbestos 4004
50. Kentastic
51. s_X_d
52. JamezC
53. Raynman
54. RickCain
55.druckle
56.druckle
57. Magaro (#2)
58. Yiorgo
59. 73neb
60. freedogg
61. inspects
62. Sweepea
63. Alawot
64. inswva

Inswva, I switched our names. Thank you.

 

[Alexander Mundy]

I'm a beta tester for Gdeal and let me clear up a few things. Gdeal doesn't make or sell anything, but graciously gives his time to design and upload those designs to Shapeways and Sculpteo 3D Printing companies for the benefit of the vaping community. There are others that use the 3D Printing services and sell kits with parts and completed mods. But anyone can order the nylon prints from the 3D Printing services and source the parts themselves if they want to, he has posted online documentation with parts list and source information. The down side to sourcing it yourself is that some of the hardware is only available in large minimum quantites. And yes, the mechanical was named Peko by Gdeal not the DNA version.

(Tom, I'll remove this is you feel it is inappropriate in your thread)

 

[RGLP4Lyfe]

Well said Mundy. Very well said, and yes, DJ will paint and assemble your mod for you. And you can buy complete already built mods. If anyone wants the link shoot me a PM. Dont want to blast it on CHs thread

-M

 

[jbmcdan]

the hornet is AWESOME for me! Thanks, Tom (and penguinness!)

 

[penguiness]

the hornet is AWESOME for me! Thanks, Tom (and penguinness!)

Glad you like it. Packs a lot of flavor in that tiny thing. My early VV Reo is back in use again. Thanks Tom!

 

[dirfm]

Vector RDA $70+$6 shipping Paypal FF

1. TheDigital99
2. Loopy1224
3. lutses
4. Robbieblood
5. Rule62
6. rudedog
7. AllPepperS
8. Chadshaw
9. Calpis
10.TheDigital99 (2nd)
11. Robbieblood (2nd)
12. Tbev
13. jhhollier
14. BENTHOS
15. distortoblotto
16. d4gger
17. Magaro
18. Rex Everything
19. Tbev (2nd)
20. fairtradesloth
21. fairtradesloth (2nd)
22. YePsTeR
23. Kingdal
24. Nautilusfan
25. Inspects
26. s_X_d
27. Wolfenstark
28. Papa_Lazarou
29. Papa_Lazarou (2nd)
30. tw33k
31. Wharfrat1976
32. pwheeler
33. petemoss
34. bullhcr
35. kiloyst
36. Alexander Mundy
37. Mantis4343
38. Magnetnerd
39. puffon
40. supersport13
41.TEEJUICE
42. NatGasMan
43. s_X_d
44. s_X_d
45.Motabrownie
46. cd68
47. distortoblotto (#2)
48. johnnyseeandoh
49. Asbestos 4004
50. Kentastic
51. s_X_d
52. JamezC
53. Raynman
54. RickCain
55.druckle
56.druckle
57. Magaro (#2)
58. Yiorgo
59. 73neb
60. freedogg
61. inspects
62. Sweepea
63. Alawot
64. inswva
65. dirfm

you guys are bad!

 

[petemoss]

Well said Mundy. Very well said, and yes, DJ will paint and assemble your mod for you. And you can buy complete already built mods. If anyone wants the link shoot me a PM. Dont want to blast it on CHs thread

-M

RGLP4Lyfe, your inbox is full so I couldn't send PM. To delete old PM's, you need to "leave conversation" for PM's you wish to delete. I just found out this a couple of days ago when my inbox was full.

 

[super_X_drifter]

Vector RDA $70+$6 shipping Paypal FF

you guys are bad!

No, what's BAD AYUSS is this vector atty

 

[KurrptSenate]

I grabbed 7 chalice II CLONES, pretty impressive quality wise but one downside is the machine oil taste I just can't rid of irrelevant of how many ultrasonic baths I give them. Is there a particular cleaner people use who have ultrasonic cleaners, I have a general concentrate fluid to add plus add some washing up liquid too. I think the problem is the two posts are screwed down into the base, the machine oil is trapped down there. On one I left soaking overnight in a thick washing up liquid and out of one of the contact came the grease which reacted with the liquid. Not nice [emoji16]


Sent from my iPhone using Tapatalk

I use simple green in my ultra sonic cleaner. Seems to conquer all

 

[Chowderhead1972]

I use simple green in my ultra sonic cleaner. Seems to conquer all

I use some industrial stuff from Crest, the strongest stuff I could get that doesn't harm rubber or plastic. Great stuff but it takes a while to rinse off. I haven't heard a complaint since I started using it. The rogue clones when the come in are outright nasty. 45 minutes on level 8 at 70 degrees Celsius and the are sparkling and smell like nothing. The Vertex2 was another that was wretched. The first run didn't go through it and it inspired me to spend $1200 on the Crest cleaner and solution. No Regerts! Lol.

 

[Asbestos4004]

I use some industrial stuff from Crest, the strongest stuff I could get that doesn't harm rubber or plastic. Great stuff but it takes a while to rinse off. I haven't heard a complaint since I started using it. The rogue clones when the come in are outright nasty. 45 minutes on level 8 at 70 degrees Celsius and the are sparkling and smell like nothing. The Vertex2 was another that was wretched. The first run didn't go through it and it inspired me to spend $1200 on the Crest cleaner and solution. No Regerts! Lol.

and we DO appreciate it!

I'm thinking about making a Machine Oil flavored eliquid....in the right atty, it'll always be spot on.

 

[RGLP4Lyfe]

and we DO appreciate it!

I'm thinking about making a Machine Oil flavored eliquid....in the right atty, it'll always be spot on.

Machine oil juice! Hahaha. You could call it "Chinese Atty Oil" and im sure it would sell like hot cakes. Haha.

-M

 

[IonMan]

I use simple green in my ultra sonic cleaner. Seems to conquer all

I use simple green at work to get machine oil off... well everything! That stuffs awesome, strip the varnish off your floor if your not careful kind of awesome. Never thought of using it to clean atties though

 

[BosleyXVI]

Is that a BF Vector RDA group buy I'm seeing? If so is there room left to get in on it?