Catfish Atty Mods the next Chapter

[freedogg]

Ok. Let's do this: keep the list but put a "confirmed" and the date next to your name.

Cam-R
1. robbieblood (Confirmed 9/7/2015)
2. Hildicat
3. Houndb (Confirmed 9/8/2015)
4. Nautilusfan (Confirmed 9/7/2015)
5. Eric Snyder
6. Finagle69 (Confirmed 9/8/2015)
7. Chowderhead1972
8. strongdad
9. inspects (Confirmed 9/7/2015)
10. BENTHOS (Confirmed 9/7/2015)

Alternate

11. Calpis
12. Wongster360
13. Henry Etta
14. Yiorgo
15. havok333 (Confirmed 09/11/2015)
16. Magnetnerd
17. Yinsen
18. distortoblotto (Confirmed 9/7/2015)
19. penguiness (Confirmed 9/8/2015)
20. LittleBird
21. AllPepperS
22. d4gger (Confirmed 9/7/2015)
23. IonMan
24. jotuck (Confirmed 9/8/2015)
25. spacelord
26. beez0527
27. rudedog
28. EZinTN
29. Loopy1224
30. Harleyndn
31. saku808
32. bullhcr (Confirmed 9/7/2015)
33. IonMan
34. TheDigital99 (Confirmed 9/7/2015)
35. NatGasMan (Confirmed 9/8/2015)
36. Sqonker (Confirmed 9/8/2015)
37. Fargazer
38. Magaro (Confirmed 9/7/2015)
39. jazzvaper (Confirmed 9/7/2015)
40. kingdal (Confirmed 9/8/2015)
41. Mrrickyyap (Confirmed 9/9/2015)
42. kkiet (Confirmed 9/8/2015)
43. snakedoc (Confirmed 9/9/15)
44. s_X_d (confirmed 09/12/15)
45. freedogg (confirmed 9/12/15)

 

[magnetnerd]

Ok. Let's do this: keep the list but put a "confirmed" and the date next to your name.
18650 CAM Mech Squonker

1. 73neb (Confirmed 9/7/2015)
2. Graywolf1911 (Confirmed 9/9/2015)
3. Houndb (Confirmed 9/7/2015)
4. Magaro (Confirmed 9/7/2015)
5. hildicat
6. Nautilusfan (Confirmed 9/7/2015)
7. Lutses
8. Magnetnerd (Confirmed 9/12/2015)
9. TheDigital99 (Confirmed 9/7/2015)
10. IonMan (Confirmed 9/8/2015)

Backup

11. distortoblotto (Confirmed 9/7/2015)
12. B2L
13. Raynman (Confirmed 9/7/2015)
14. 2buildawall
15. JeffreyAce
16. Rex Everything (Confirmed 9/8/2015)
17. Chadshaw
18. Loopy 1224
19. spacelord
20. cd68 (Confirmed 9/8/2015)
21. pwheeler
22. calpis
23. bullhcr (Confirmed 9/7/2015)
24. Slappy3139
25. kiloyst
26. havok333 (Confirmed 9/11/2015)
27. rudedog (Confirmed 9/9/2015)
28. Walter Ego (Confirmed 9/8/2015)
29. Daigoman
30. SeanMoore
31. Clark F
32. Raynman
33. Kentastic
34. Magaro (Confirmed 9/7/2015)
35. EZinTN
36. Houndb
37. Wolfenstark (Confirmed 9/10/2015)
38. saku808
39. Hildecat
40. Magnetnerd (2nd)
41. Thomas Mitchell
42. Magaro (Confirmed 9/7/2015)
43. d4gger (Confirmed 9/7/2015)
44. Beez0527 ( confirmed 9/8/2015)
45. Element77 (confirmed 9/8/2015)
46. bottomfeeder (confirmed 9/8/15)



Sent from my XT1064 using Tapatalk

 

[RobbieVape]

Damn excited about the CAM-R seems to be moving along fast now, it's going to look sick as hell with the anodised finish, can't wait to see finished pictures. BRING ON THE CAM-R [emoji109]


Sent from my iPhone using Tapatalk

 

[RobbieVape]

Damn excited about the CAM-R seems to be moving along fast now, it's going to look sick as hell with the anodised finish, can't wait to see finished pictures. BRING ON THE CAM-R [emoji109]


Sent from my iPhone using Tapatalk

 

[beez0527]

Ok. Let's do this: keep the list but put a "confirmed" and the date next to your name.

Cam-R
1. robbieblood (Confirmed 9/7/2015)
2. Hildicat
3. Houndb (Confirmed 9/8/2015)
4. Nautilusfan (Confirmed 9/7/2015)
5. Eric Snyder
6. Finagle69 (Confirmed 9/8/2015)
7. Chowderhead1972
8. strongdad
9. inspects (Confirmed 9/7/2015)
10. BENTHOS (Confirmed 9/7/2015)

Alternate

11. Calpis
12. Wongster360
13. Henry Etta
14. Yiorgo
15. havok333 (Confirmed 09/11/2015)
16. Magnetnerd
17. Yinsen
18. distortoblotto (Confirmed 9/7/2015)
19. penguiness (Confirmed 9/8/2015)
20. LittleBird
21. AllPepperS
22. d4gger (Confirmed 9/7/2015)
23. IonMan
24. jotuck (Confirmed 9/8/2015)
25. spacelord
26. beez0527 (Confirmed 9-12-2015)
27. rudedog
28. EZinTN
29. Loopy1224
30. Harleyndn
31. saku808
32. bullhcr (Confirmed 9/7/2015)
33. IonMan
34. TheDigital99 (Confirmed 9/7/2015)
35. NatGasMan (Confirmed 9/8/2015)
36. Sqonker (Confirmed 9/8/2015)
37. Fargazer
38. Magaro (Confirmed 9/7/2015)
39. jazzvaper (Confirmed 9/7/2015)
40. kingdal (Confirmed 9/8/2015)
41. Mrrickyyap (Confirmed 9/9/2015)
42. kkiet (Confirmed 9/8/2015)
43. snakedoc (Confirmed 9/9/15)
44. s_X_d (confirmed 09/12/15)
45. freedogg (confirmed 9/12/15)

 

[bullhcr]

I have a question to coil builders more experienced than me.

When I build the Thump I position the coil as far to the edge as possible and a little upwards toward the air channels. However this means really long legs and a 20% leg power loss according to steam-engine. Anyone found a practical solution to this little problem?

 

[Rule62]

I kept my coils in, closer to the posts. Maybe half way between the outer edge and the posts. I saw no reason to crowd the outer edge, since it's top air, not side air.

 

[super_X_drifter]

Wow... The CC is awesome but I didn't realize how similar it was to a TMod girl from the outside. both great devices, both great friends. This is also a big part of the reason I designed the Cam-M to be more angular and less bar of soap shaped. I wish I could talk either or both of them into a helix shape with a smooth depression in the middle so it would be shaped like the number 8 from the top. Ano+ Helix equals me with a Vaper Chubby.....

It's actually a direct albeit smaller size copy of the Pdib Sumptin. I had one of those up until a year or so ago.

 

[super_X_drifter]

I have a question to coil builders more experienced than me.

When I build the Thump I position the coil as far to the edge as possible and a little upwards toward the air channels. However this means really long legs and a 20% leg power loss according to steam-engine. Anyone found a practical solution to this little problem?

I don't pull em up I put em in my typical location - kinda low.

 

[super_X_drifter]

What's this ^^^^^^^ ! Hey everyone, superX is going regulated!

Knowing that this is a first of a kind mod and that it will be as close to bulletproof as a regulated device can be couple with Toms CS make this a no brainer entry into the regulated world.

Talking to Tom about the details of this mod will get one excited. I expect catfish ingenuity and stumpy quality to be equate to a "must have" device.

 

[Wolfenstark]

I have a question to coil builders more experienced than me.

When I build the Thump I position the coil as far to the edge as possible and a little upwards toward the air channels. However this means really long legs and a 20% leg power loss according to steam-engine. Anyone found a practical solution to this little problem?

Don't have the thump but I have all coils in all attys close to the posts on the positive wire then the negative wire angled over.
Can on occasion get some uneven heating but nothing a strum of the coils has not fixed.
Do it due to wanting wraps instead of legs. Using Vector currently with the top flow air and its great.

 

[Rule62]

Don't have the thump but I have all coils in all attys close to the posts on the positive wire then the negative wire angled over.
Can on occasion get some uneven heating but nothing a strum of the coils has not fixed.
Do it due to wanting wraps instead of legs. Using Vector currently with the top flow air and its great.

I built the Thump pretty much this way. The leg from the positive post is straight out. The negative leg is bent, to go to the post. This way, the coils are basically centered. Even though the negative leg is longer, it doesn't matter, once the coils are strummed, and oxidized.

 

[Kentastic]

Ok. Let's do this: keep the list but put a "confirmed" and the date next to your name.
18650 CAM Mech Squonker

1. 73neb (Confirmed 9/7/2015)
2. Graywolf1911 (Confirmed 9/9/2015)
3. Houndb (Confirmed 9/7/2015)
4. Magaro (Confirmed 9/7/2015)
5. hildicat
6. Nautilusfan (Confirmed 9/7/2015)
7. Lutses
8. Magnetnerd (Confirmed 9/12/2015)
9. TheDigital99 (Confirmed 9/7/2015)
10. IonMan (Confirmed 9/8/2015)

Backup

11. distortoblotto (Confirmed 9/7/2015)
12. B2L
13. Raynman (Confirmed 9/7/2015)
14. 2buildawall
15. JeffreyAce
16. Rex Everything (Confirmed 9/8/2015)
17. Chadshaw
18. Loopy 1224
19. spacelord
20. cd68 (Confirmed 9/8/2015)
21. pwheeler
22. calpis
23. bullhcr (Confirmed 9/7/2015)
24. Slappy3139
25. kiloyst
26. havok333 (Confirmed 9/11/2015)
27. rudedog (Confirmed 9/9/2015)
28. Walter Ego (Confirmed 9/8/2015)
29. Daigoman
30. SeanMoore
31. Clark F
32. Raynman
33. Kentastic(Confirmed 9/12/2015)
34. Magaro (Confirmed 9/7/2015)
35. EZinTN
36. Houndb
37. Wolfenstark (Confirmed 9/10/2015)
38. saku808
39. Hildecat
40. Magnetnerd (2nd)
41. Thomas Mitchell
42. Magaro (Confirmed 9/7/2015)
43. d4gger (Confirmed 9/7/2015)
44. Beez0527 ( confirmed 9/8/2015)
45. Element77 (confirmed 9/8/2015)
46. bottomfeeder (confirmed 9/8/15)

 

[bullhcr]

Thanks for the help with the Thump.

I decided to go for something like the build sXd showed. Coils close to the posts and on the side ie. using the closest post in the positive block. No centering. Being on the side I can direct the airflow right onto the top of the coil. Works very well.

Apropos spare oring for the Thump. I think I need some extra grub screws as well. The two spares are already in use after two screws fell to the floor and probably being lost forever.

Sloppy build to show what I did.

 

[Chowderhead1972]

I have a question to coil builders more experienced than me.

When I build the Thump I position the coil as far to the edge as possible and a little upwards toward the air channels. However this means really long legs and a 20% leg power loss according to steam-engine. Anyone found a practical solution to this little problem?

If you look at the air flow the coils should be centered between the air holes and the drip tip and held reasonably high to make the air go evenly over and under the coil without bypassing the coil, this will yield the best flavor but may be a bit harsh. If you find this position too harsh just push the coil down 1mm at a time until you are happy. Top air attys require more tuning than side air simply because the air doesn't travel in a straight line, it arcs and the vector of that arc will change depending on how hard you draw.

 

[Chowderhead1972]

As previously mentioned the Thump uses 4-40 x 1/8" grub screws and an .050" Allen wrench. The same grubs and wrench that the Derringer uses.

I literally have hundreds of these grub screws (upwards of 500) and will include a few with your subsequent orders just mention it in your follow up email.

 

[Chowderhead1972]

I don't pull em up I put em in my typical location - kinda low.

Remember SuperX uses unflavored so he is looking more for a balance of volume and throat hit, the less flavor he gets the happier he is. If it flavor you want lift your coils, if you are using over flavored juice drop them down.

 

[Chowderhead1972]

Damn excited about the CAM-R seems to be moving along fast now, it's going to look sick as hell with the anodised finish, can't wait to see finished pictures. BRING ON THE CAM-R [emoji109]


Sent from my iPhone using Tapatalk

So awesome he had to say it twice....

 

[B2L]

Ok. Let's do this: keep the list but put a "confirmed" and the date next to your name.
18650 CAM Mech Squonker

1. 73neb (Confirmed 9/7/2015)
2. Graywolf1911 (Confirmed 9/9/2015)
3. Houndb (Confirmed 9/7/2015)
4. Magaro (Confirmed 9/7/2015)
5. hildicat
6. Nautilusfan (Confirmed 9/7/2015)
7. Lutses
8. Magnetnerd (Confirmed 9/12/2015)
9. TheDigital99 (Confirmed 9/7/2015)
10. IonMan (Confirmed 9/8/2015)

Backup

11. distortoblotto (Confirmed 9/7/2015)
12.
13. Raynman (Confirmed 9/7/2015)
14. 2buildawall
15. JeffreyAce
16. Rex Everything (Confirmed 9/8/2015)
17. Chadshaw
18. Loopy 1224
19. spacelord
20. cd68 (Confirmed 9/8/2015)
21. pwheeler
22. calpis
23. bullhcr (Confirmed 9/7/2015)
24. Slappy3139
25. kiloyst
26. havok333 (Confirmed 9/11/2015)
27. rudedog (Confirmed 9/9/2015)
28. Walter Ego (Confirmed 9/8/2015)
29. Daigoman
30. SeanMoore
31. Clark F
32. Raynman
33. Kentastic(Confirmed 9/12/2015)
34. Magaro (Confirmed 9/7/2015)
35. EZinTN
36. Houndb
37. Wolfenstark (Confirmed 9/10/2015)
38. saku808
39. Hildecat
40. Magnetnerd (2nd)
41. Thomas Mitchell
42. Magaro (Confirmed 9/7/2015)
43. d4gger (Confirmed 9/7/2015)
44. Beez0527 ( confirmed 9/8/2015)
45. Element77 (confirmed 9/8/2015)
46. bottomfeeder (confirmed 9/8/15)


I'm going to have to bow out, thank you.

 

[Rule62]

Thanks for the help with the Thump.

I decided to go for something like the build sXd showed. Coils close to the posts and on the side ie. using the closest post in the positive block. No centering. Being on the side I can direct the airflow right onto the top of the coil. Works very well.

Apropos spare oring for the Thump. I think I need some extra grub screws as well. The two spares are already in use after two screws fell to the floor and probably being lost forever.

Sloppy build to show what I did.

This is how I built it. Kinda the opposite. On mine, the negative is the long leg. The positive comes straight out, so the coils are centered.