Catfish Atty Mods the next Chapter

[Chowderhead1972]

I was pif'd one of your Hellboy mods. Just curious if there's a way to get a new center pin screw. My lead fingers managed to break it. The mod still works. Just wanna fix it right.

No problem... There were 2 different versions however. Each one uses a different sized screw. Email me some pics of what you have.

 

[Chowderhead1972]

Sometimes the lists get pushed back a couple pages by all the chatter here Doesn't mean the are gone, just not at the top of the thread...

Takes some sluething sometimes to bump them back up to the top

The Rogues are still on the table.

 

[Un5tab1e]

No problem... There were 2 different versions however. Each one uses a different sized screw. Email me some pics of what you have.

Can't message u....



Sent from my HTC6525LVW using Tapatalk

 

[NickelNitty]

Ok thanks, I'm not always on the forum, but I try to stay up to speed. So sometimes when I log on I panic when the thread isn't there. Anyway thank you for the feedback.

 

[TheDigital99]

I need to respectfully bow out of the CAM-Mech (as much as this pains me)

I am pulling myself from the #9 Spot
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List is full. No new additions.

Put a "confirmed" and the date next to your name in order to stay on the list.

18650 CAM Mech Squonker

1. 73neb (Confirmed 9/7/2015)
2. Graywolf1911 (Confirmed 9/9/2015)
3. Houndb (Confirmed 9/7/2015)
4. Magaro (Confirmed 9/7/2015)
5. hildicat
6. Nautilusfan (Confirmed 9/7/2015)
7. Lutses
8. Magnetnerd
9.
10. IonMan (Confirmed 9/8/2015)
11. distortoblotto (Confirmed 9/7/2015)
12. Raynman (Confirmed 9/7/2015)
13. 2buildawall
14. JeffreyAce (Confirmed 9/13/2015)
15. Rex Everything (Confirmed 9/8/2015)
16. Chadshaw
17. Loopy 1224 (Confirmed 9/14/2015)
18. spacelord
19. cd68 (Confirmed 9/8/2015)
20. pwheeler
21. calpis
22. bullhcr (Confirmed 9/7/2015)
23. Slappy3139
24. kiloyst
25. havok333 (Confirmed 9/11/2015)
26. rudedog (Confirmed 9/9/2015)
27. Walter Ego (Confirmed 9/8/2015)
28. Daigoman
29. SeanMoore
30. Clark F
31. Raynman (Confirmed 9/7/2015)
32. Kentastic (Confirmed 9/12/2015)
33. Magaro (Confirmed 9/7/2015)
34. EZinTN
35. Houndb
36. Wolfenstark (Confirmed 9/9/2015)
37. saku808
38. Hildecat
39. Magnetnerd (2nd)
40. Thomas Mitchell
41. Magaro (Confirmed 9/7/2015)
42. d4gger (Confirmed 9/7/2015)
43. Beez0527 ( confirmed 9/8/2015)
44. Element77 (confirmed 9/8/2015)
45. bottomfeeder (confirmed 9/8/15)
----------List is full. No new additions----------

 

[keepsmiling]

Stumpy List $100.00 Plus $6.00 Shipping (Unlimited)

1: kkiet
2. m3th1dz
3. Mommabird62
4. jazzvaper
5. havok33
6.keepsmiling
7.
8.
9.
10.

Drip Tips

1. kkiet
2. jazzvaper (White)
3. m3th1dz (White)
4. havok333
5.


Some drip tips are available at additional cost, but will not be ordering more.
I think this is the last list.

 

[snakedoc]

Whois in for another Thump? $90+$6 shipping

1. Loopy1224 (I'll pay for the copper derringer cap along with this)
2. AllPepperS
3. bullhcr
4. d4gger
5. TheDigital99
6. RobbieVape
7. TheKiwi
8. Beez0527
9. Calpis
10. RickCain
11. havok333
12. S_X_D
13. Kentastic
14. snakedoc
These and 28 more were paid for today. They should be in Wednesday or Thursday.

What drip tips are you guys/gurls using with this atty?
widebore seems like wonky on this.

 

[havok333]

I guess now is probably a good time to ask...so since I've been away have the payment options changed? Seems I read no more PayPal for CAM products? Just want to be sure I have ducks in a row ahead of time so as to not hold things up.

Stoked to try out the Thump!

Sent from my XT1049 using Tapatalk

 

[TheDigital99]

I guess now is probably a good time to ask...so since I've been away have the payment options changed? Seems I read no more PayPal for CAM products? Just want to be sure I have ducks in a row ahead of time so as to not hold things up.

Stoked to try out the Thump!

Sent from my XT1049 using Tapatalk

Havok, Google Wallet is the digital payment being used in the U.S.

 

[havok333]

Havok, Google Wallet is the digital payment being used in the U.S.

Perfect, thank you!

Sent from my XT1049 using Tapatalk

 

[super_X_drifter]

No problem... There were 2 different versions however. Each one uses a different sized screw. Email me some pics of what you have.

He has my v2

 

[Alawot]

YES!
I'm not the only one!! I have three Vectors. I've learned to routinely give the post a tightness test with a good sized flathead, usually with every rebuild. They seem to work a little loose at times. I had one that was nearly 1/4 turn loose

I've done this as well.

 

[Chowderhead1972]

He has my v2

Gotcha...

 

[Chowderhead1972]

Can't message u....



Sent from my HTC6525LVW using Tapatalk

Send me an email... Hint it's on the bottom of my logo.

 

[NickelNitty]

What's up chuckers, just got the Hcigar VT200 (which I ordered a while back, before linking up with Tmods) so no worries, I'm patiently waiting for my killer squonker. Anyway, well built mod, feels solid. I guess it will keep me occupied till D-Day... Anyone else got there hands on one of these VT 200 from Hcigar?

 

[Un5tab1e]

Send me an email... Hint it's on the bottom of my logo.

Oops my bad. Just thought u meant pm

Sent from my HTC6525LVW using Tapatalk

 

[Chowderhead1972]

Oops my bad. Just thought u meant pm

Sent from my HTC6525LVW using Tapatalk

No,worries.... Most people trust and use the pm system. It just so happens I'm not one of those people. When I get a pm it's from ecf admins telling me of my latest ECF TOS infraction.

 

[penguiness]

I need to respectfully bow out of the CAM-Mech (as much as this pains me)

I am pulling myself from the #9 Spot
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List is full. No new additions.

Put a "confirmed" and the date next to your name in order to stay on the list.

18650 CAM Mech Squonker

1. 73neb (Confirmed 9/7/2015)
2. Graywolf1911 (Confirmed 9/9/2015)
3. Houndb (Confirmed 9/7/2015)
4. Magaro (Confirmed 9/7/2015)
5. hildicat
6. Nautilusfan (Confirmed 9/7/2015)
7. Lutses
8. Magnetnerd
9.
10. IonMan (Confirmed 9/8/2015)
11. distortoblotto (Confirmed 9/7/2015)
12. Raynman (Confirmed 9/7/2015)
13. 2buildawall
14. JeffreyAce (Confirmed 9/13/2015)
15. Rex Everything (Confirmed 9/8/2015)
16. Chadshaw
17. Loopy 1224 (Confirmed 9/14/2015)
18. spacelord
19. cd68 (Confirmed 9/8/2015)
20. pwheeler
21. calpis
22. bullhcr (Confirmed 9/7/2015)
23. Slappy3139
24. kiloyst
25. havok333 (Confirmed 9/11/2015)
26. rudedog (Confirmed 9/9/2015)
27. Walter Ego (Confirmed 9/8/2015)
28. Daigoman
29. SeanMoore
30. Clark F
31. Raynman (Confirmed 9/7/2015)
32. Kentastic (Confirmed 9/12/2015)
33. Magaro (Confirmed 9/7/2015)
34. EZinTN
35. Houndb
36. Wolfenstark (Confirmed 9/9/2015)
37. saku808
38. Hildecat
39. Magnetnerd (2nd)
40. Thomas Mitchell
41. Magaro (Confirmed 9/7/2015)
42. d4gger (Confirmed 9/7/2015)
43. Beez0527 ( confirmed 9/8/2015)
44. Element77 (confirmed 9/8/2015)
45. bottomfeeder (confirmed 9/8/15)
----------List is full. No new additions----------

Sorry to hear this, digital. I will post a renumbered list. Hope everything is alright with you. If it isn't, I hope it gets better really soon.

 

[penguiness]

List is full. No new additions.
Put a "confirmed" and the date next to your name in order to stay on the list.

18650 CAM Mech Squonker

1. 73neb (Confirmed 9/7/2015)
2. Graywolf1911 (Confirmed 9/9/2015)
3. Houndb (Confirmed 9/7/2015)
4. Magaro (Confirmed 9/7/2015)
5. hildicat
6. Nautilusfan (Confirmed 9/7/2015)
7. Lutses
8. Magnetnerd
9. IonMan (Confirmed 9/8/2015)
10. distortoblotto (Confirmed 9/7/2015)
11. Raynman (Confirmed 9/7/2015)
12. 2buildawall
13. JeffreyAce (Confirmed 9/13/2015)
14. Rex Everything (Confirmed 9/8/2015)
15. Chadshaw
16. Loopy 1224 (Confirmed 9/14/2015)
17. spacelord
18. cd68 (Confirmed 9/8/2015)
19. pwheeler
20. calpis
21. bullhcr (Confirmed 9/7/2015)
22. Slappy3139
23. kiloyst
24. havok333 (Confirmed 9/11/2015)
25. rudedog (Confirmed 9/9/2015)
26. Walter Ego (Confirmed 9/8/2015)
27. Daigoman
28. SeanMoore
29. Clark F
30. Raynman (Confirmed 9/7/2015)
31. Kentastic (Confirmed 9/12/2015)
32. Magaro (Confirmed 9/7/2015)
33. EZinTN
34. Houndb
35. Wolfenstark (Confirmed 9/9/2015)
36. saku808
37. Hildecat
38. Magnetnerd (2nd)
39. Thomas Mitchell
40. Magaro (Confirmed 9/7/2015)
41. d4gger (Confirmed 9/7/2015)
42. Beez0527 ( confirmed 9/8/2015)
43. Element77 (confirmed 9/8/2015)
44. bottomfeeder (confirmed 9/8/15)
----------List is full. No new additions----------

 

[inspects]

Sorry to hear this, digital. I will post a renumbered list. Hope everything is alright with you. If it isn't, I hope it gets better really soon.

Ditto Peng's thoughts, this so called great economy and falsified gibber-jabber from the fed bean-counters is far from the real truth. Underemployment and unemployment is ravaging this country with millions more on gov subsidies than ever before.

I've spoke to several people really having hard times. If we don't get someone in the whitehouse next time I think it'll be curtains for the good ole US of A.

Its really really sad.

Idiots, with no real life comprehension of running a country like a business. We have to get these lying career politicians OUT of office or its not anyone's fault but our own.