Catfish Atty Mods the next Chapter

[jazzvaper]

Hi Tom:

The SnapDragon arrived this PM. Impressive build quality. And, innovative.

Recurring question to self, 'Will I be able to switch to TF; did Tom include that pin?' The screw, filling the squonk hole, should be done for every atty.

I don't believe I will get good air on my latest VR Wood mod (posted above with the latest Stumpy). But it will look great on the "Jelly Bean", especially after I receive the matching DT.

Thanks!

 

[Asbestos4004]

Hi Tom:

The SnapDragon arrived this PM. Impressive build quality. And, innovative.

Recurring question to self, 'Will I be able to switch to TF; did Tom include that pin?' The screw, filling the squonk hole, should be done for every atty.

I don't believe I will get good air on my latest VR Wood mod (posted above with the latest Stumpy). But it will look great on the "Jelly Bean", especially after I receive the matching DT.

Thanks!

Looks Great on there! I was impressed with the build quality as well....it's quickly become my favorite squonking atty. From what I hear, the NarDa will steal that spot away in short order.

 

[distortoblotto]

Hi Tom:

The SnapDragon arrived this PM. Impressive build quality. And, innovative.

Recurring question to self, 'Will I be able to switch to TF; did Tom include that pin?' The screw, filling the squonk hole, should be done for every atty.

I don't believe I will get good air on my latest VR Wood mod (posted above with the latest Stumpy). But it will look great on the "Jelly Bean", especially after I receive the matching DT.

Thanks!

Right on Jazz! Looking good there sir...

 

[pennysmalls]

Got my Stumpy Tom, thank you!

 

[Sloth Tonight]

Lolol....OK buddy. Seems like everything you get your hands on breaks. Funny.
Incidentally, there was no juice on the board. I didn't run that mod with the wood panels. I put them on the day I shipped it....dry as a bone. Keep passing that buck, junior. You'll eventually get someone with the horns.

And the word you're looking for is "riddance". You might consider attaching a breathalyzer to your keyboard.

Just so the truth is exceedingly clear, I would like to say I have personally dealt with Asbestos multiple times with products going both ways. He is a class act and nothing short of it. Items as described - shipped very quickly - no problems. If I were to rate Asbestos in terms of honesty and all else, would be A++++++++++.

 

[Asbestos4004]

Just so the truth is exceedingly clear, I would like to say I have personally dealt with Asbestos multiple times with products going both ways. He is a class act and nothing short of it. Items as described - shipped very quickly - no problems. If I were to rate Asbestos in terms of honesty and all else, would be A++++++++++.

Dang, thanks man!

 

[GillTheGrunt]

Never mind found it

 

[Nautilusfan]

Just so the truth is exceedingly clear, I would like to say I have personally dealt with Asbestos multiple times with products going both ways. He is a class act and nothing short of it. Items as described - shipped very quickly - no problems. If I were to rate Asbestos in terms of honesty and all else, would be A++++++++++.

Absolutely agree!! Asbestos is a class act all the way!!

 

[jazzvaper]

You can ignore my last email, Tom. All spares were in the package top cap, as you well know. [emoji6]

Turns out the Dragon works just fine on my "Laminate 26", as shown below.

Built a single at 0.59 (7-wrap 24 awg?) because I was too anxious to fiddle with a dual. But I will get that down soon enough.

Marvelous Vape!

 

[MFToms59]

OK, I'm back on as an alternate, couldn't resist the reviews comparing it to the Stumpy, which I'm growing to like very much.

The NarDa 40 .( $100+ 6 )
1. distortoblotto
2. distortoblotto
3. jhhollier
4. RickCain
5. hotsauc333
6. 67Tele
7. inswva
8. m3th1dz
9. AllPepperS
10. NatGasMan
11. Harleyndn
12. Papa_Lazarou
13. EZinTN
14. bottomfeeder
15. BENTHOS
16. YePsTeR
17. Strongdad
18. rbferg
19. sheishreviews
20. 67Tele
21. hotsauc333
22. turbocad6
23. Asbestos
24. Asbestos
25. ligonski
26. kingdal
27. bullhcr
28. glassman
39. Kentastic
30. AndyW
31. Kentastic (+Slam Cap if available)
32. inspects
33. Chowderhead1972
34. Chowderhead1972
35. Chowderhead1972
36. Fargazer
37. unsure
38. petemoss
39. Unior
40. TheDigital99

Alternates: (I will try to grovel for a few extras)
41. Penny
42.Henry Etta
43.Kentastic
44. inspects
45. Gigdujour
46. B2L
47. motabrownie
48. RGLP4Lyfe
49. MFToms59

 

[Chowderhead1972]

You can ignore my last email, Tom. All spares were in the package top cap, as you well know. [emoji6]

Turns out the Dragon works just fine on my "Laminate 26", as shown below.

Built a single at 0.59 (7-wrap 24 awg?) because I was too anxious to fiddle with a dual. But I will get that down soon enough.

Marvelous Vape!

While I find the snappy a little tall, that looks like an amazing pairing. The afc scallops look similar to the trim (filegre?) on the mod.

 

[Chowderhead1972]

If you have another BF Hobo 3.1 (authentic)(the updated one right)
I would be happy to take one off your hands

POP Money ready to go, 86.00 ???

It seems Uniour has changed his mind on the Hobo, if you want it it's yours.

 

[Drillerrt]

I only have the one left. I think Unior beat you to the punch though. I do have extra hobo pins that I could bore out further and send with your next order to save on shipping however.

I would be interested in a pin for the hobo.

 

[Magma]

Received the stumpy today. Can't wait to build it up and try it

 

[Mrrickyyap]

OK,

The NarDa 40 .( $100+ 6 )
1. distortoblotto
2. distortoblotto
3. jhhollier
4. RickCain
5. hotsauc333
6. 67Tele
7. inswva
8. m3th1dz
9. AllPepperS
10. NatGasMan
11. Harleyndn
12. Papa_Lazarou
13. EZinTN
14. bottomfeeder
15. BENTHOS
16. YePsTeR
17. Strongdad
18. rbferg
19. sheishreviews
20. 67Tele
21. hotsauc333
22. turbocad6
23. Asbestos
24. Asbestos
25. ligonski
26. kingdal
27. bullhcr
28. glassman
39. Kentastic
30. AndyW
31. Kentastic (+Slam Cap if available)
32. inspects
33. Chowderhead1972
34. Chowderhead1972
35. Chowderhead1972
36. Fargazer
37. unsure
38. petemoss
39. Unior
40. TheDigital99

Alternates: (I will try to grovel for a few extras)
41. Penny
42.Henry Etta
43.Kentastic
44. inspects
45. Gigdujour
46. B2L
47. motabrownie
48. RGLP4Lyfe
49. MFToms59
50. Mrrickyyap

Sent from my iPhone using Tapatalk

 

[Mrrickyyap]

The NarDa 40 .( $100+ 6 )
1. distortoblotto
2. distortoblotto
3. jhhollier
4. RickCain
5. hotsauc333
6. 67Tele
7. inswva
8. m3th1dz
9. AllPepperS
10. NatGasMan
11. Harleyndn
12. Papa_Lazarou
13. EZinTN
14. bottomfeeder
15. BENTHOS
16. YePsTeR
17. Strongdad
18. rbferg
19. sheishreviews
20. 67Tele
21. hotsauc333
22. turbocad6
23. Asbestos
24. Asbestos
25. ligonski
26. kingdal
27. bullhcr
28. glassman
39. Kentastic
30. AndyW
31. Kentastic (+Slam Cap if available)
32. inspects
33. Chowderhead1972
34. Chowderhead1972
35. Chowderhead1972
36. Fargazer
37. unsure
38. petemoss
39. Unior
40. TheDigital99

Alternates: (I will try to grovel for a few extras)
41. Penny
42.Henry Etta
43.Kentastic
44. inspects
45. Gigdujour
46. B2L
47. motabrownie
48. RGLP4Lyfe
49. MFToms59
50. Mrrickyyap



Sent from my iPhone using Tapatalk

 

[Houndb]

Thanks for the Atty's Tom. My dumb ... move for the day. So excited for the snapdragon built it really quick and place it on my mod. I always do a squeeze check before putting the top on. No juice squeeze even harder and nothing.





Why didn't anyone tell me the bf pin doesn't come installed!!! Once that problem was fixed success! Was thrown off because I didn't think anything that came from Tom didn't already have holes drilled into it. I think the catfish logo needs a piece of Swiss cheese in its mouth.

 

[Houndb]

And a picture of the new attys on a couple of mods

 

[pwheeler]

Got the Stumpy today. Thanks much, Tom

Sent from my HTC Desire Eye using Tapatalk

 

[Rex Everything]

New stumpy arrived. ...thank you Tom.., first Z coil between post build installed (2 strand twisted 26g ni80 6 wraps 2.5mm I'd .35 ohms) pretty nifty vape but I see myself hanging some simple 24g dual at some point