Catfish Atty Mods the next Chapter

[Chowderhead1972]

I am not a regular on ECF and it seems I cannot PM. This seems the best place to post this, apologies if not. I am looking for a BF Stro Mini V1. Could I get a quote and possibly an ETA on making this happen?

Nobody can PM me unless I have sent you a pm first... (Not likely). My normal method would be email as mentioned by Rex. The Stroh Mini looks feasible but the bottom air looks problematic. If you wish to send one(or more) I will take it on. Please send me an email to get started.

Just to clarify: the PM comment wasn't meant to be snarky, the simple fact is on a light day I get 20 emails on a heavy day it can be 200+. I need a way to track and organize them so when you ask me a question I don't do the deer in the headlights routine. The fact that I have severe ADD doesn't help either. Luckily this thread works just like my brain; Fast paced and all over the map.

 

[Asbestos4004]

How many people with ADD does it take to change a light bulb?

Wanna go fishing?

 

[Chowderhead1972]

I'm going to chip away at the pile of send ins that have accrued over the last few weeks today so my response time may be slowed. With any luck I will have time to get back on the Releaux.

Reminds me; I think I'm going to the Releaux for the people on the list on a send in basis. It comes down to I just don't have the funds available to pay for all the LBC parts as well as another 5-6k to buy the 50 Releaux to get started. I would suggest ordering them from nwvaper but that is entirely up to you. The easiest way will to just have them drop shipped direct to me. I will do them 10 at a time, once those ten are on the way out the door I will open the gate for the next ten. Seem logical. I don't see many new attys screaming to be bottom fed coming out so I will be able to devote most of my catfish time to the Releaux until the LBC parts all arrive and come back from the anodizer.

 

[TheDigital99]

Let us know when you are ready and I will have one dropped shipped

 

[fishwater]

Let us know when you are ready and I will have one dropped shipped

Me too, my finger is hovering over the order button as we speak.....operator's are standing by...

 

[havok333]

Same as above, lol

Sent from my XT1049 using Tapatalk

 

[skillzizzo]

How many people with ADD does it take to change a light bulb?

Wanna go fishing?

3. two to spin the latter and one to hold the bulb. I will hold the bulb I get dizzy when I am not wearing my helmet

 

[calpis]

ready to drop ship.

 

[rudedog]

looks like if your going off the list those of us towards the bottom probly wont be gettin a chance at 1 of the wismecs b4 the lbc's then?or are going to start back up with the wismec's after you get the lbc's done up(couple months??)?i just dont want to buy a wismec and be stuck with it as a regulated mod cuz i am a fulltime squonker...no biggie i just dont wanna non-squonking mod in my rotation.--

 

[67Tele]

Hey Tom
Is it possible to do the BF conversion on a RX200 Realeaux?

Thanks

 

[RickCain]

Hey Tom
Is it possible to do the BF conversion on a RX200 Realeaux?

Thanks

I don't think you want to do that one.... IMHO the Wismec chip is nothing compared to a DNA.

 

[Chowderhead1972]

Hey Tom
Is it possible to do the BF conversion on a RX200 Realeaux?

Thanks

I'm not messing with that board... I'm very comfortable with the dna200.

 

[Chowderhead1972]

looks like if your going off the list those of us towards the bottom probly wont be gettin a chance at 1 of the wismecs b4 the lbc's then?or are going to start back up with the wismec's after you get the lbc's done up(couple months??)?i just dont want to buy a wismec and be stuck with it as a regulated mod cuz i am a fulltime squonker...no biggie i just dont wanna non-squonking mod in my rotation.--

Agreed. Don't order it until your number comes up. I'm sure once I get through the first 10 the rest will move quickly. Think of it as practice.

 

[67Tele]

I don't think you want to do that one.... IMHO the Wismec chip is nothing compared to a DNA.

I'm not messing with that board... I'm very comfortable with the dna200.

Thanks guys!

 

[Houndb]

So the first ten can ship to you?

 

[Chowderhead1972]

Gimme a minute guys.... The heap of send ins are done and will ship tomorrow. I have another 20 stumpys arriving tomorrow that are already sold to an Italian vape shop as well as 20 Thumps... I'm international now.....

I know you guys are dying for dna200 squonkers but I'm only one Chump that loves to take on more than I have time for but I really want to do the Sqounkleaux Dna133. As soon as I get this huge order out the door I will be on the SLX133. I will probably curtailing my atty duties for a while to work on the SLX unless something groundbreaking comes along. Please don't send Releaux to me until I raise the gate; I stress out when I see piles of work.

 

[fishwater]

Tom, as you can see we are excited about the SLX133 but speaking for myself I am only worried that you'll stop doing them once you're in full LBC work mode.

For me, I'm more concerned that as you mentioned you'll stop them indefinitely before I have a chance to own one. If production will continue beyond the LBC then I'm sure all of us are more than willing to wait our turn. Just my my cent's.....

 

[distortoblotto]

The Aeronaut...If you are looking for big air, look no further! Built with a twisted 2mm 24g to 0.5 in slotted top air configuration. Overall the flavor is decent and the clouds are huge. Tried it with top and bottom air, bottom air and top air is the best for me. Plan to toss a bunch of different builds at it to see where it lands.

 

[inspects]

The Aeronaut...If you are looking for big air, look no further! Built with a twisted 2mm 24g to 0.5 in slotted top air configuration. Overall the flavor is decent and the clouds are huge. Tried it with top and bottom air, bottom air and top air is the best for me. Plan to toss a bunch of different builds at it to see where it lands.

View attachment 533318

View attachment 533319

Looks like a nice build DB, haven't tried the atty yet, but this build will be the first attempt.

 

[inspects]

Gimme a minute guys.... The heap of send ins are done and will ship tomorrow. I have another 20 stumpys arriving tomorrow that are already sold to an Italian vape shop as well as 20 Thumps... I'm international now.....

I know you guys are dying for dna200 squonkers but I'm only one Chump that loves to take on more than I have time for but I really want to do the Sqounkleaux Dna133. As soon as I get this huge order out the door I will be on the SLX133. I will probably curtailing my atty duties for a while to work on the SLX unless something groundbreaking comes along. Please don't send Releaux to me until I raise the gate; I stress out when I see piles of work.

I certainly agree with you Catfish....I can't wait to get an actual LBC in my hand. Not concerned about the 133. I'm sure they will make nice mods but the LBC should take precedence.

Catfish Atty Mods DNA 200....!