One entry equals one mod. Just add another entry for the gray. Be sure to use you second list position next to your ECF user name.I completed the form without reading the rest of the posts. In mine Tom, I ordered 2 and noted the other color in the notes. But now knowing grey is Ti, I would like to change the green to a Ti one. Let me know if I need to do anything.
Correct. So far the only failure I have had on any of my demos was the result of a hard fall on one of the ones I had retained the balancing connector plug. The mod hit so hard that the impact knocked the plug off the board. Zero failures with any of the direct wired mods and 2 of them have hit much harder with zero issue. I work outside in terrible conditions and I have used my demos exclusively for the last 6 months with exactly one failure my goal is to omit that failure point.Hi all, the LBC looks really great. Am just getting ready to fill out the doc and trying to decide if i should be in for 1 or 2. Biggest question for me is how easy is it going to be to replace the battery when I need to eventually? Is it held on by connectors? Or is soldering required?
Appreciate any answers. Thanks!
This is the day you have all been waiting for.... Yes you guessed it. The LBC list is here.
Very important:
If you wish to keep your existing place on the ECF list please please please (I'm begging you here) on the top line where it asks for your ECF/Facebook name put your ECF screen name followed by the number or numbers from the ECF list.
For example: Chowderhead1972 #62
If you do not do this you will lose your spot. You have 1 week, 7 days from right now to fill out the doc. I need to work on the color choices and once that's done I will post the link. Should be a few minutes.
Here it is.....
LBC DNA200 by Catfish Attymods
Please bump this post when you add yourself to the doc. This will reduce the hunting.
Doc filled and bumped. Thanks for offering green!
I have also put the prototype through hell with no issues....Correct. So far the only failure I have had on any of my demos was the result of a hard fall on one of the ones I had retained the balancing connector plug. The mod hit so hard that the impact knocked the plug off the board. Zero failures with any of the direct wired mods and 2 of them have hit much harder with zero issue. I work outside in terrible conditions and I have used my demos exclusively for the last 6 months with exactly one failure my goal is to omit that failure point.
Yours is hard wired... Yours will require severe abuse to come undone. I only did the balancing plug on the last 2 I did, I have one Chad has the other, so far he hasn't had an issue but I want to be prepared for the worst.I have also put the prototype through hell with no issues....
Sent from my VS986 using Tapatalk
This is the day you have all been waiting for.... Yes you guessed it. The LBC list is here.
Very important:
If you wish to keep your existing place on the ECF list please please please (I'm begging you here) on the top line where it asks for your ECF/Facebook name put your ECF screen name followed by the number or numbers from the ECF list.
For example: Chowderhead1972 #62
If you do not do this you will lose your spot. You have 1 week, 7 days from right now to fill out the doc. I need to work on the color choices and once that's done I will post the link. Should be a few minutes.
Here it is.....
LBC DNA200 by Catfish Attymods
Please bump this post when you add yourself to the doc. This will reduce the hunting.
This is the day you have all been waiting for.... Yes you guessed it. The LBC list is here.
Very important:
If you wish to keep your existing place on the ECF list please please please (I'm begging you here) on the top line where it asks for your ECF/Facebook name put your ECF screen name followed by the number or numbers from the ECF list.
For example: Chowderhead1972 #62
If you do not do this you will lose your spot. You have 1 week, 7 days from right now to fill out the doc. I need to work on the color choices and once that's done I will post the link. Should be a few minutes.
Here it is.....
LBC DNA200 by Catfish Attymods
Please bump this post when you add yourself to the doc. This will reduce the hunting.
Doc filled out twice. On the second, I had a write in candidate for color but made a note of 2nd choice color in case no orange is offered.
Thanks Tom!
No.... It's aluminum annodized Ti color. Just the block of Ti to make an LBC would be over $400.Just wanted to confirm, The light grey is a titanium version and not 6160 Aluminum anodized to a titanium color?