Catfish Atty Mods the next Chapter

Status
Not open for further replies.

Chowderhead1972

Unregistered Supplier
ECF Veteran
Feb 19, 2013
9,112
31,913
Clarksburg, Maryland, United States
This is the day you have all been waiting for.... Yes you guessed it. The LBC list is here.

Very important:
If you wish to keep your existing place on the ECF list please please please (I'm begging you here) on the top line where it asks for your ECF/Facebook name put your ECF screen name followed by the number or numbers from the ECF list.
For example: Chowderhead1972 #62
If you do not do this you will lose your spot. You have 1 week, 7 days from right now to fill out the doc. I need to work on the color choices and once that's done I will post the link. Should be a few minutes.

Here it is.....

LBC DNA200 by Catfish Attymods

Please bump this post when you add yourself to the doc. This will reduce the hunting.

Doc filled out twice. On the second, I had a write in candidate for color but made a note of 2nd choice color in case no orange is offered.
Thanks Tom!
If I get ten requests for orange or red I will try to do them.
 

Tagi

Super Member
ECF Veteran
Verified Member
Feb 26, 2014
682
1,192
Dallas Texas
No.... It's aluminum annodized Ti color. Just the block of Ti to make an LBC would be over $400.

Yup, That had me doing a double take.

----

Completed and bumped

This is the day you have all been waiting for.... Yes you guessed it. The LBC list is here.

Very important:
If you wish to keep your existing place on the ECF list please please please (I'm begging you here) on the top line where it asks for your ECF/Facebook name put your ECF screen name followed by the number or numbers from the ECF list.
For example: Chowderhead1972 #62
If you do not do this you will lose your spot. You have 1 week, 7 days from right now to fill out the doc. I need to work on the color choices and once that's done I will post the link. Should be a few minutes.

Here it is.....

LBC DNA200 by Catfish Attymods

Please bump this post when you add yourself to the doc. This will reduce the hunting around

dna 200 LBC (little bit cheaper)
1. houndb
2. distortoblotto
3. jazzvaper
4. EZinTN
5. Strongdad
6. inspects
7. Nautilusfan
8. TheDigital99 (Carbon Fiber Doors if they become a reality)
9. TheKiwi
10. calpis
11. bottomfeeder
12.YePsTeR
13.Beez0527
14.Asbestos4004
15.Kingdal
16.NatGasMan
17.goofy2302
18.4nic8
19.BENTHOS
20.pwheeler
21.mcpuff
22.Papa_Lazaro
23.Wolfenstark
24.havok333
25.Mr.Mann
26.Yiorgo
27.Magnetnerd
28.Plumeguy
29.Fishwater
30.yinsen
31. hotsauc333
32. laurie9300
33. snakedoc
34. Copterstyle
35. Fargazer
36. Kentastic
37. inswva
38. rudedog
39. RickCain
40. Tamer El-Meehy
41. jhhollier
42. Tagi
43. jmosh55
44. slightlystoop
45. drucco99
46.Ted Goodwin
47.freedogg
48.DennyD
49.Mrhan
50.dfmckay
51.HeiSINberg
52. havok333
53. distortoblotto
54. Nautilusfan
55. inspects
56. NatGasMan
57. petemoss
58. melodiousThunk
59. bottomfeeder
60. kilroyst
61. Copterstyle
62. Houndb
63. Houndb
 

snakedoc

Senior Member
ECF Veteran
Verified Member
Sep 26, 2014
193
343
New York
Completed and bumped

This is the day you have all been waiting for.... Yes you guessed it. The LBC list is here.

Very important:
If you wish to keep your existing place on the ECF list please please please (I'm begging you here) on the top line where it asks for your ECF/Facebook name put your ECF screen name followed by the number or numbers from the ECF list.
For example: Chowderhead1972 #62
If you do not do this you will lose your spot. You have 1 week, 7 days from right now to fill out the doc. I need to work on the color choices and once that's done I will post the link. Should be a few minutes.

Here it is.....

LBC DNA200 by Catfish Attymods

Please bump this post when you add yourself to the doc. This will reduce the hunting around

dna 200 LBC (little bit cheaper)
1. houndb
2. distortoblotto
3. jazzvaper
4. EZinTN
5. Strongdad
6. inspects
7. Nautilusfan
8. TheDigital99 (Carbon Fiber Doors if they become a reality)
9. TheKiwi
10. calpis
11. bottomfeeder
12.YePsTeR
13.Beez0527
14.Asbestos4004
15.Kingdal
16.NatGasMan
17.goofy2302
18.4nic8
19.BENTHOS
20.pwheeler
21.mcpuff
22.Papa_Lazaro
23.Wolfenstark
24.havok333
25.Mr.Mann
26.Yiorgo
27.Magnetnerd
28.Plumeguy
29.Fishwater
30.yinsen
31. hotsauc333
32. laurie9300
33. snakedoc
34. Copterstyle
35. Fargazer
36. Kentastic
37. inswva
38. rudedog
39. RickCain
40. Tamer El-Meehy
41. jhhollier
42. Tagi
43. jmosh55
44. slightlystoop
45. drucco99
46.Ted Goodwin
47.freedogg
48.DennyD
49.Mrhan
50.dfmckay
51.HeiSINberg
52. havok333
53. distortoblotto
54. Nautilusfan
55. inspects
56. NatGasMan
57. petemoss
58. melodiousThunk
59. bottomfeeder
60. kilroyst
61. Copterstyle
62. Houndb
63. Houndb
 

Chowderhead1972

Unregistered Supplier
ECF Veteran
Feb 19, 2013
9,112
31,913
Clarksburg, Maryland, United States
Question before I hit submit on the LBC doc. Are the buttons going to be the same color as the anodizing like the CAD drawing CH?
No... The buttons will be stainless low profile. The fire button will stick out 2mm and the up down will protrude 1/2 of millimeter. Annodized buttons would only work with an annodized bezel. Carbon fiber is abrasive on the sides and would shred the anno in a few weeks. The stainless is hard enough that it will last for years before showing any wear.
 

Chowderhead1972

Unregistered Supplier
ECF Veteran
Feb 19, 2013
9,112
31,913
Clarksburg, Maryland, United States
Doc filled out and just realized I forgot to put my number from the list (13) Would you like me to fill out another or just put me at the end . Whatever is easiest for you.

Sent from my SM-P600 using Tapatalk
Yes, please fill it out again, I will delete the first one. Please put something in the comments box to delet your previous entry.
 
Last edited:
  • Like
Reactions: YePsTeR

Asbestos4004

Vaping Master
ECF Veteran
Verified Member
Sep 11, 2013
6,802
28,169
Sugar Hill, Georgia
This is the day you have all been waiting for.... Yes you guessed it. The LBC list is here.

Very important:
If you wish to keep your existing place on the ECF list please please please (I'm begging you here) on the top line where it asks for your ECF/Facebook name put your ECF screen name followed by the number or numbers from the ECF list.
For example: Chowderhead1972 #62
If you do not do this you will lose your spot. You have 1 week, 7 days from right now to fill out the doc. I need to work on the color choices and once that's done I will post the link. Should be a few minutes.

Here it is.....

LBC DNA200 by Catfish Attymods

Please bump this post when you add yourself to the doc. This will reduce the hunting.

Done and bumped
 

Kentastic

Not Batman
ECF Veteran
Verified Member
Dec 30, 2013
1,878
10,303
Central Californication
No... The buttons will be stainless low profile. The fire button will stick out 2mm and the up down will protrude 1/2 of millimeter. Annodized buttons would only work with an annodized bezel. Carbon fiber is abrasive on the sides and would shred the anno in a few weeks. The stainless is hard enough that it will last for years before showing any wear.

Sounds good. Now I just have to figure out what color I want.....
 

beez0527

SQUONKAHOLIC
ECF Veteran
Verified Member
Dec 5, 2014
1,809
4,200
54
Etna,OH
Yes, please fill it out again, I will delete the first one. Please put something in the comments box to delet your previous entry.
Redone . Are you making a set number or just from the order totals as I can see myself maybe wanting another but not absolutely sure right now.

Sent from my SM-P600 using Tapatalk
 
Status
Not open for further replies.

Users who are viewing this thread