Cisco LR 306 vs LR 510 (I wish I had known they use the same connector earlier!)

[Sewknitty]

I've got some 306 tips from Nhaler (gorgeous!) I'm not willing to give up (cuz they're PRETTY ) so I'll just have to slow down a bit and not let the atty get too hot. I also tried the Joyes and wasn't blown away but these Ciscos...I finally get why they're so popular.

 

[breaktru]

I've tried the Joye 306 LR at 1.5 ohms and found it quite satisfying at 3.7v.

 

[dspin]

Agreed, nothing like a Cisco and I can't do a LR306 2.0 either - not enough for me

Perhaps I was already biased because I tried Cisco's first, but I was not happy with the Joye 306's. I tried a few after Cisco stopped selling the 306's wholesale and before I was told I could still get them from Avid Vaper. I experienced performance on par with EM LR 510s. They're not worth the price premium I'm willing to pay for Cisco's, in my opinion.

 

[dspin]

It. definately had to be a bad one. Theres a world of difference even between that and a Cisco LR 510 1.5 You did get the 1.5 didn't you. They have the 2.0's also

Not bashing but I don't get the hype.

I tried 1 Cisco 306lr and it performed no better or worse than the $4 510lr attys I've been getting from EastMall and Greenhouse1.

Didn't put out more vapor or flavour.

Mabe I got a bad one.

 

[cr12]

i just ordered the 1.5's from avid vapes

 

[MikeDeason]

It. definately had to be a bad one. Theres a world of difference even between that and a Cisco LR 510 1.5 You did get the 1.5 didn't you. They have the 2.0's also

Tried one of these...not sure if 1.5 or not

Canadian electronic cigarette Happy/Cicco low resistance 306 atomizer (atomiser) - Black, Silver

 

[dspin]

Did you meter it? I got one in once that was 1.7 and was nasty- I can tell the diff. though some will say not

Tried one of these...not sure if 1.5 or not

Canadian electronic cigarette Happy/Cicco low resistance 306 atomizer (atomiser) - Black, Silver

 

[Jackinkc]

I just got a cisco 1.5 from avid vapes. I use is on my Ego 900 battery and it hits like a ton of bricks. I am hoping I can turn down the voltage when my provari comes in. I currently mostly use the Ego 510 LR 1.5, and that hit is almost perfect. The cicsco is a bit too much for me, and I love a nice throat hit.

 

[bjannr]

I really like the 306. I am still on my first one. It has been almost a month. I just ordered some more 306 atties, but it didn't say if they came with drip tips. Does anyone know if I can re-use the drip tips from the 306? Can the drip tips be used on more than one atty? (Of course, not at the same time) lol.

 

[cr12]

i got some cisco 306 lr 1.5 ohms from avid vapes, im having a huge problem with burnt taste right out of the gate, usually attys for me taste a little funky at first then break in and taste good, i cant shake the funky taste for some reason.

 

[cr12]

I really like the 306. I am still on my first one. It has been almost a month. I just ordered some more 306 atties, but it didn't say if they came with drip tips. Does anyone know if I can re-use the drip tips from the 306? Can the drip tips be used on more than one atty? (Of course, not at the same time) lol.

yes they can its simply a slide on tip, and you can use them until they wont stay on the 306 any longer

 

[mamacat]

i got some cisco 306 lr 1.5 ohms from avid vapes, im having a huge problem with burnt taste right out of the gate, usually attys for me taste a little funky at first then break in and taste good, i cant shake the funky taste for some reason.

I believe Cisco's specs in the manufacturing process eliminate the "primer" or that funky taste. What voltage are you using it on?

Also, Laurel099 just got in new 2.0ohm LR306's and she is raving about those, too. I might have to pick a few of those up, but we both would be using on the Darwin. Might make a difference with the VV.

 

[cr12]

900mah ego 3.7v, i tried three of them so far, and its pretty nasty, im going to keep pushing on this one and see if i cant get it to taste better, if anyone has any tips specifically for cisco lr 306's im open to hear it.

 

[Jackinkc]

cr, I'm using the same thing and I am tasting a burnt taste as well. That's why I'm looking forward to trying it on a lower voltage. It hits lot a ton of bricks and I get the burnt taste. I have some 501 801 901 2.0 and 1.5 coming in from avid. I'll do a review when they come in.

 

[mamacat]

I have an old school suggestion. Do you have an old contact lens case that has the left/right cups or something similar? These are similar to the 401 in terms of atty shape when the cartridge has been removed. You might try to "dip" the bridge of the atty in your favorite liquid.

Could be that the lack of the drip tip will require this method? Let us know if that works.

 

[cr12]

I'm using a drip tip I even went as far as debridging and dewicking the large wick and leaving the wick inside the coil all to no avail

Sent from my PC36100 using Tapatalk

 

[BiffRocko]

Cisco attys MUST be properly primed or they will taste burnt. I had the same problem with my first 306 LR.

http://www.e-cigarette-forum.com/forum/vaporflow/128108-cisco-lr-306-user-guide.html

 

[cr12]

I read that before I used them and followed the instructions I can't help but think I got a bad batch still tasting burnt

 

[Hotwire]

you are being conned

 

[mamacat]

I read that before I used them and followed the instructions I can't help but think I got a bad batch still tasting burnt

Then contact Cisco. Bet he'd be interested to hear of your experience and help.