[CLOSED BUSINESS]
- Thread starter Capt' Brian
- Start date
- th_trl_thread_readers 0
- Status
I've been using the Sony VTC4 2200 mAh 30amp to good effect in both DNA and mechanical devices.
Panasonic CGR18650CH 2250 mAh work well also, but the Sony batteries put them to shame as far as life goes.
Panasonic CGR18650CH 2250 mAh work well also, but the Sony batteries put them to shame as far as life goes.
I got my Cutlass and it's beautiful! Using a Sony 18650 2600 and an RM2. Couldnt get the RM2 to fire without a 510 adapter though. ..
Loving the mod.
Sweet looking, try backing the center pin of the RM2 out just a bit, some of them shipped just little to far in. This thread shows how they are put together http://www.e-cigarette-forum.com/fo...2-full-atomizer-itself-rebuild-pic-heavy.html
In this photo the one on the left is too far in, the center I've found work on most mods and right is just little farther out.
Last edited:
Got my 8 box mod with 30ml and 6ml bottles holder. Looks great with the 5 box mod holder and I room for expansion 
Thanks for the info again. I thought that might be the case but believe it or not the firing pin on my RM2 wasn't slotted so I didn't know if they adjusted or not. So I used some really skinny tipped needle nosed pliers and backed it out a little. Works like a charm now. Thx for the info "filthy"!Sweet looking, try backing the center pin of the RM2 out just a bit, some of them shipped just little to far in. This thread shows how they are put together http://www.e-cigarette-forum.com/fo...2-full-atomizer-itself-rebuild-pic-heavy.html
In this photo the one on the left is too far in, the center I've found work on most mods and right is just little farther out.
OK... So if there are no pictures... It didn't happen.
So I had to wait to give one last thank you to the Capt. for my gorgeous, new Vape Stand.
Thank you so much for such a great addition to my living room furnishings!
So I had to wait to give one last thank you to the Capt. for my gorgeous, new Vape Stand.
Thank you so much for such a great addition to my living room furnishings!
I'm waiting to see Dennis's 25 hole mega-caddy!
(greedy SOB )
I have 2 of the 5 hole ones, but they are inexplicably full of mods right now, much to HRH's irritation
Need more overtime to keep up with my hobby!
T
(greedy SOB
)I have 2 of the 5 hole ones, but they are inexplicably full of mods right now, much to HRH's irritation
Need more overtime to keep up with my hobby!
T
Ahoy all! Stands and mods arriving, pics being posted, it's all good!
I started picking out wood for the next batch. I spoke to Brandon at evolv vaper today and I will be getting a shipment of the new DNA20 boards from him in the next few weeks so it looks like I'm good to go, time to start building.
Desk caddy sales tanked again, so it looks like I might get an easy weekend for a change!
Just got a Friday to get through and then it's fun time, arrrr
I started picking out wood for the next batch. I spoke to Brandon at evolv vaper today and I will be getting a shipment of the new DNA20 boards from him in the next few weeks so it looks like I'm good to go, time to start building.
Desk caddy sales tanked again, so it looks like I might get an easy weekend for a change!
Just got a Friday to get through and then it's fun time, arrrr
Brandon is truly a class act. He personally saw to the repair of my Darwin for me, when it came back refusing to recharge itself, after a battery replacement. It's so rare that someone with a successful new product takes the time to look after his old customers. I'm going to have to reward that behavior by buying something with his newest chip in it!
Not the best picture, but the Cap'n did say he forgot to take a pic of the 25...
and with the 10 box...
the fully loaded "after" pics will have to wait til i find or source some wood glue.
i'm guessing the best way is to glue both ends, fit top and bottom and put my encyclopedia brittanica or a cast iron skillet or sumpin on top while it sets?
these are sexy beautiful. thank you, Cap'n!
and with the 10 box...
the fully loaded "after" pics will have to wait til i find or source some wood glue.
i'm guessing the best way is to glue both ends, fit top and bottom and put my encyclopedia brittanica or a cast iron skillet or sumpin on top while it sets?
these are sexy beautiful. thank you, Cap'n!
You could put a 10 box mod caddy behind each one, then they'd look like 15 box mod caddies and you'd have plenty of room for expansion.I'm waiting to see Dennis's 25 hole mega-caddy!
(greedy SOB
I have 2 of the 5 hole ones, but they are inexplicably full of mods right now, much to HRH's irritation
Need more overtime to keep up with my hobby!
T
Very nice I'm going to love see the loaded pic.Not the best picture, but the Cap'n did say he forgot to take a pic of the 25...
and with the 10 box...
the fully loaded "after" pics will have to wait til i find or source some wood glue.
i'm guessing the best way is to glue both ends, fit top and bottom and put my encyclopedia brittanica or a cast iron skillet or sumpin on top while it sets?
these are sexy beautiful. thank you, Cap'n!
It doesn't need to be any special wood glue since it's not going to take a lot of stress. I just used super glue even though I had good wood glue in a box in the garage.
Wait if you'er going to pick it up by the top deck to move 50 mods you better get great glue.
Wow... you guys are way bigger modhoarderscollectors than me!!
fixed that for ya, GG
Oh yeah, really a nice guy, we had a nice long chat about the state of e-cigs and what the future might hold. He talked about some new stuff coming down the pipeline from his outfit, good things coming. It was nice for a little guy like me to chat with someone so far up the vape chain of command, heh.
He also made some great improvements to the DNA20 boards that I am happy to see as well.
This upcoming batch will have 3.7v mods as well as DNA20 mods and I am pretty sure they will also feature reverse battery protection (finally) as had been mentioned before on the thread.
As for gluing the desk caddies, I usually make the pegs tight fitting enough anymore that you don't need glue, but, with so many pegs involved in the large 8, 10 and 25 box caddies I made them a bit more loose so the assembly would be easier.
Superglue. A single small drop smeared around where wood touches wood and you should be good to go. Do the top first if the bottom holes seem more loose. When they are dry, do the other side. Or if your brave, do them all at once!
Arrrrrr!
He also made some great improvements to the DNA20 boards that I am happy to see as well.
This upcoming batch will have 3.7v mods as well as DNA20 mods and I am pretty sure they will also feature reverse battery protection (finally) as had been mentioned before on the thread.
As for gluing the desk caddies, I usually make the pegs tight fitting enough anymore that you don't need glue, but, with so many pegs involved in the large 8, 10 and 25 box caddies I made them a bit more loose so the assembly would be easier.
Superglue. A single small drop smeared around where wood touches wood and you should be good to go. Do the top first if the bottom holes seem more loose. When they are dry, do the other side. Or if your brave, do them all at once!
Arrrrrr!
- Status
Similar threads
