[CLOSED BUSINESS]
- Thread starter Capt' Brian
- Start date
- th_trl_thread_readers 0
- Status
Agreed it has been to quiet here lately. As for plans nothing much here really just hoping to get in some D3 time with my friends.
Ditto on the quiet. Just waiting to hear what day closing is, May 15 is tentative I guess.
I did have tons of "fun" answering the questions of the underwriters. Every purchase I've made over the last 6 months that wasn't at a gas station or grocery store they questioned. I had fun explaining high end vaping to them!
I did have tons of "fun" answering the questions of the underwriters. Every purchase I've made over the last 6 months that wasn't at a gas station or grocery store they questioned. I had fun explaining high end vaping to them!
Ahoy, welcome to Monday!
I assume everyone had fun this weekend, outside playing, adventure, excitement or something. Unfortunately it's time to get back to work.
Weather outside is fantastic, hard to make myself sit indoors all day. I wish I had a tree big enough to string a hammock in, arrrrrr
Have a great week all!
I assume everyone had fun this weekend, outside playing, adventure, excitement or something. Unfortunately it's time to get back to work.
Weather outside is fantastic, hard to make myself sit indoors all day. I wish I had a tree big enough to string a hammock in, arrrrrr
Have a great week all!
Lil late for this, but thank you for my mod stand. And thank you for letting this woman change her mind. The stand is pretty and I want more but I will have to wait a bit on the next order. The stand fits right into my decor lol - I basically live in a cabin in the woods. Wood inside and 5 acres of woods outside. THE STANDS ARE BREATHTAKING and no one should hesitate in any way shape or form to order from this fella - prices and workmanship are top notch - did I say prices are spot on?
Again, thank you so much. No pic available at this time, but I'll get one. I'm a day late and a dollar short basically every day of my life. If my life was perfect or anything close to it; things would be boring !
Warm regards ~Barbara~
There she is - my iddy biddy lol
Dont~choo~worry~ There will be more to purchase ~
Dont~choo~worry~ There will be more to purchase ~
Still pretty quiet around here. I will post a few pics of this little batch tomorrow and I'm waiting on word from evolv about the regulators. In the meantime I'm going to start a full batch and just assume I will get regulators by the time I need them. Not much else I can do....
arrr
It looks very pretty in that setting. Next time mention the size of holes you need and I will make it custom sized to your mods for ya
arrr
There she is - my iddy biddy lol
Dont~choo~worry~ There will be more to purchase ~
It looks very pretty in that setting. Next time mention the size of holes you need and I will make it custom sized to your mods for ya
I know Brian, I meant to do that, ask for different size holes, but I forgot. My middle name is "forgot". I thought
this might get top heavy, leaning like that, but it's all good
My forgetting is bothering me. I'm not getting ill, but my plate is so full that even my best friend said if she didn't
know me personally, she wouldn't believe half the things I have to go through in life lately.
I DO however, plan on getting "big girl mods" one day, soon, so those holes will have new toys in them
Regards ~Barbara~
this might get top heavy, leaning like that, but it's all good
My forgetting is bothering me. I'm not getting ill, but my plate is so full that even my best friend said if she didn't
know me personally, she wouldn't believe half the things I have to go through in life lately.
I DO however, plan on getting "big girl mods" one day, soon, so those holes will have new toys in them
Regards ~Barbara~
Still pretty quiet around here. I will post a few pics of this little batch tomorrow and I'm waiting on word from evolv about the regulators. In the meantime I'm going to start a full batch and just assume I will get regulators by the time I need them. Not much else I can do....
arrr
It looks very pretty in that setting. Next time mention the size of holes you need and I will make it custom sized to your mods for ya
Last edited:
Ahoy and BLAST!!
Man, I am getting old and stupid.
I took some pictures of the mods and was cropping the pics down to size and realized an important thing.... I forgot to put SQUONK holes in the door panels of the feeders.... argggggggggg!
I will be spending the rest of the day doing that, then carefully sanding down the new holes and refinishing them as necessary.....what can I say....
ah well, have a great day all, yo ho!
Man, I am getting old and stupid.
I took some pictures of the mods and was cropping the pics down to size and realized an important thing.... I forgot to put SQUONK holes in the door panels of the feeders.... argggggggggg!
I will be spending the rest of the day doing that, then carefully sanding down the new holes and refinishing them as necessary.....what can I say....
ah well, have a great day all, yo ho!
Stopping for the night. Got those pesky squonk holes put in the feeders perfectly. A tab bit of sanding on the hole edges with 400 grit sand paper and a little finish on the inside and they are ready to go. Will have pics tomorrow fer sure as soon as I have some sunlight shining down.
Silly rabbit, that's what friends and beer are for, moving!
arrrr
Ahoy and greetings crew!
Just got my official closing date for my house! Sucks I'm working so many Saturdays coming up and won't be able to move properly.
Silly rabbit, that's what friends and beer are for, moving!
arrrr
Ahoy and greetings crew!
Just got my official closing date for my house! Sucks I'm working so many Saturdays coming up and won't be able to move properly.
Congrats on the closing date!!
Waho, that is awesome. Don't fret, just remember it is yours and you can take all the time in the world to get the moving part done. Enjoy!
Ya ya, I know, easy for me to say huh?
Ya ya, I know, easy for me to say huh?
Ahoy and greetings crew!
Just got my official closing date for my house! Sucks I'm working so many Saturdays coming up and won't be able to move properly.
Epic Cappy! Yeah I guess a feeder without a squonk hole would certainly be original, but not that convenient
Congrats Waho, the hardest part is done, relax now. Cappy's right, that's what friends are for
Have a very nice VE day everyone.
Last edited:
Ok, they are done. Absolutely done. Nothing left to do. Trust me!
Ahoy and happy Thursday btw....
Here are the pics. The 26650 batteries in the Cruiser26 & Marauder26 were prototypes and traditionally I use either Mahogany or Walnut for them. This time they were done in African Mahogany. I also used heavy battery tabs for them.
Cruiser - standard 18650 with black hardware;
Cruiser - Big battery 26650 with Chrome hardware;
and a Marauder - Big battery 26650 with SS switch;
There are a handful of the 18650 Cruisers, two 26650 Cruisers and one 26650 Marauder available.
I've not yet heard back from Evolv about the regulators..... I can only start the next batch and hope that I will have the DNA's by the time they are ready to be installed. If they aren't..... I may very well be screwed.... cross ur fingers..
Have a great day all, arrrr!
Ahoy and happy Thursday btw....
Here are the pics. The 26650 batteries in the Cruiser26 & Marauder26 were prototypes and traditionally I use either Mahogany or Walnut for them. This time they were done in African Mahogany. I also used heavy battery tabs for them.
Cruiser - standard 18650 with black hardware;
Cruiser - Big battery 26650 with Chrome hardware;
and a Marauder - Big battery 26650 with SS switch;
There are a handful of the 18650 Cruisers, two 26650 Cruisers and one 26650 Marauder available.
I've not yet heard back from Evolv about the regulators..... I can only start the next batch and hope that I will have the DNA's by the time they are ready to be installed. If they aren't..... I may very well be screwed.... cross ur fingers..
Have a great day all, arrrr!
Capt'-What are the woods on these?Are they all the same?Is the black hardware stainless?
- Status
Similar threads
