[CLOSED BUSINESS]

[jakematic]

LOL ok... you are technically correct. I'll just wait till I get my Cutlass and see what fits and what doesn't.

I'll bet my recently released and recently purchased 22mm bottom feeding rebuildable atomizer named Odin by a company that calls itself LokiLab is not going to fit.

Know you'd wanted one in a bad way and got a bit nervous you might've got the wrong model and were planning a 26650 atty LOL.

Just put an inside measuring caliper to the drip cup and it's 15mm.

I really want and Odin after seeing Super_X review of it.... no way it would go on a Cutlass though

The Cyclone is phenomenal. Just got two more from Chowderhead and have a Divo in the works.

 

[Nautilusfan]

LOL ok... you are technically correct. I'll just wait till I get my Cutlass and see what fits and what doesn't.

I'll bet my recently released and recently purchased 22mm bottom feeding rebuildable atomizer named Odin by a company that calls itself LokiLab is not going to fit.

It certainly will not!! 15.4mm drip cup if I remember correctly Don't really get the bf thing with the Odin. Part of its beauty is the large well which really isn't necessary with a bottom feeder. But with that said I would like to own a tf Odin !!

 

[jakematic]

Don't really get the bf thing with the Odin. Part of its beauty is the large well which really isn't necessary with a bottom feeder

I'm intrigued with it as an rda and it doesn't look too small and fiddly to work on.

Deep wells are good for a dripper, small chambers for a BF atty IMHO.
Hear it has great flavor though too....

 

[Capt' Brian]

Ahoy!

Had a beer, relaxed a bit, time to go relax some more, tomorrow is gonna be busy!

Would someone do me a huge favor and add a tag to the thread "mod info page one" or something like that? Might answer some basic questions to new ppl.

As for atties, I'm STILL using the A7, although I'm using the A7 mini now as the regular size is hard to find. I'm a pretty crappy person to ask about what fits on my own mod I guess.

Have a great Sunday all, arrr

 

[fright88]

Ahoy!

Had a beer, relaxed a bit, time to go relax some more, tomorrow is gonna be busy!

Would someone do me a huge favor and add a tag to the thread "Mod info page one" or something like that? Might answer some basic questions to new ppl.

As for atties, I'm STILL using the A7, although I'm using the A7 mini now as the regular size is hard to find. I'm a pretty crappy person to ask about what fits on my own mod I guess.

Have a great Sunday all, arrr

How do you like the a7 mini? Is it just a shorter A7? If so I am wondering if it would benefit from drilling a side hole to supply the air instead of getting it through the base.

 

[mackman]

Well then I guess I'm the proud owner of the Australian Mahogany & Desert Ironwood Cutlass mod. Awesome!

Now I just have to figure out what RDA to run on it. Does anyone know if a Reactor V2 will fit the Cutlass? I've got a RM2 I can use, but I'm just thinking of my options.

Well you will love this Ken (since you sold yours) but my favorite on mine is a Hornet, closely followed by a Cyclone; and a RM2 is always a winner.

 

[Kentastic]

I had a Cruiser not a Cutlass, but at the time all I had was an RM2. I've got much more of a selection of smaller BF atties now to choose from. Don't have an A7 though. Only an A6, but I like the Reactor v2 better both for the deck and the vape you can get out of it. It "should" fit. I just can't wait!!!

 

[MamaTried]

Well you will love this Ken (since you sold yours) but my favorite on mine is a Hornet, closely followed by a Cyclone; and a RM2 is always a winner.

I had a Cruiser not a Cutlass, but at the time all I had was an RM2. I've got much more of a selection of smaller BF atties now to choose from. Don't have an A7 though. Only an A6, but I like the Reactor v2 better both for the deck and the vape you can get out of it. It "should" fit. I just can't wait!!!

drought talkin...

 

[aidreon]

Ahoy everyone! I haven't been on ECF for a long time, ages it seems, I guess it was time to check in and see what' up....only too late to even have a chance to see a single mod online, I knew it was yesterday from Darth on the french forum but went to bed totally forgetting the sale
Anyway, I'm very happy to see that RSM still rocks, I keep looking at all the new "hot stuff" hitting the market, but there's still nothing like what Cappy is able to produce out there, so congrats to everyone who had the chance to check out with one of these beauties yesterday

 

[fright88]

I had a Cruiser not a Cutlass, but at the time all I had was an RM2. I've got much more of a selection of smaller BF atties now to choose from. Don't have an A7 though. Only an A6, but I like the Reactor v2 better both for the deck and the vape you can get out of it. It "should" fit. I just can't wait!!!

Please update us once you get your mods if the reactor works.

 

[damselle]

Stopped by to see hoe everyone did in the sale. Seems pretty good. Only one maurader left on the site this a.m.

RDA - Rebuildible Dripping Atomizer. aka Dripper, Atty, topper, squonkeeee... ect.
Cutlass - DNA 30 Bottom Feeder.... feeding an atomizer up top..... not included with the Cutlass.

Unless I'm off somewhere...

What else would you run on it?

I think you guys mean RBA...unless you plan to retrofit you RDA for BFing. Me, I'm a lazy vaper, so I don't like fiddling.

Ahoy!



Would someone do me a huge favor and add a tag to the thread "Mod info page one" or something like that? Might answer some basic questions to new ppl.
, arrr

Which thread Cappy, this one?

 

[ninjazx11]

well,

happy man this morning got confirmation of my cutlass,

now got to buy a bf atty....

 

[LJFinFLA]

Ok so after mowing the lawn before the heat sets in here (only 90)! at 11:30. Quick dip in the pool to cool down. Right the water is a chilly 89 degrees. I go online to check my e-mails and there's on from the Capt'. Well my heart was thumping thinking that I was one of the double orders after the excitement last night.

Time for the Happy dance again!!! Order Confirmed!!!!! WOO HOO!!!!

Thanks Capt'. Permission to come aboard Sir. Thank you for all your hard work and I look forward to enjoying my one year quitting anniversary using one of your magnificient mods! I hope one of many to come!!!!
WTH is my mail carrier!!!!!
Now to get a topper. Ideas crew!!!

 

[supertrunker]

RM2 (Reomizer 2). Thank me later.

T

 

[LJFinFLA]

RM2 (Reomizer 2). Thank me later.

T

I'll check them out Thanks!

 

[Waho]

Ahoy everyone! I haven't been on ECF for a long time, ages it seems, I guess it was time to check in and see what' up....only too late to even have a chance to see a single mod online, I knew it was yesterday from Darth on the french forum but went to bed totally forgetting the sale
Anyway, I'm very happy to see that RSM still rocks, I keep looking at all the new "hot stuff" hitting the market, but there's still nothing like what Cappy is able to produce out there, so congrats to everyone who had the chance to check out with one of these beauties yesterday

Long time no see my friend! I hope life has been treating you well

 

[debinnv]

Ummm, cutlass? It's a crusier Dennis. I'm getting a little nervous too cuz it said it was delivered already.

it was the pics of your light colored ones with the dark "scars" that warmed me up to this look. deb's cutlass with similar look is en route.

i still want glassgal's tho

 

[Kentastic]

Ummm, cutlass? It's a crusier Dennis. I'm getting a little nervous too cuz it said it was delivered already.

Mama probably hasn't left the house to check the mail debinnv. We are lucky he woke up to buy a Cutlass and your Cruiser.

 

[debinnv]

Well I hope that's it. I know myself, I caught some sort of stupid flu thing so I just got up to check my email. I swear it seems like every time I leave the house now and go out in the public I get sick. Sheesh.

 

[Kentastic]

Know you'd wanted one in a bad way and got a bit nervous you might've got the wrong model and were planning a 26650 atty LOL.

Just put an inside measuring caliper to the drip cup and it's 15mm.

I really want and Odin after seeing Super_X review of it.... no way it would go on a Cutlass though

The Cyclone is phenomenal. Just got two more from Chowderhead and have a Divo in the works.

I agree, I'm partial to both the cyclone and the RM2. I just asked CH about the Divo... missed the first round. I'll have to be in on the second. I didn't even know there were any more available. I was hoping one day to find one in the classies to try it out, but now I can get one new.

The Odin is pretty awesome for a full sized dripper. For a 22mm dripper it actually has a pretty small chamber, but it's definitely a cooler vape than the cyclone. On the positive side it's much easier to build and if you add a little extra wicking material you don't have to squonk as often and with the way the air holes are channeled it doesn't leak as much as the cyclone's AFC. (though the regular cyclone top cap never leaks on me). I like it, but I'm not giving up all my other atomizers for it like Super_X. LOL