[Closed]Unregistered Supplier : Bogger Box Mods

[lalasalama8]

Gratz man, sounds beautiful. I am jealous, my super minis haven't made it yet and I am closer to NM than you are. I cry foul! LoL. Enjoy it my friend!!

Oh yeah, almost forgot the obligatory...Pics or it didn't happen!

I am still trying to figure out my new stinkin' camera and how to get pics loaded here...now I guess I have new motivation to git r done..the first picture I will take and load will be this little beauty..thanks Ratman and I know you'll love your new minis too..that Marcus is quite the perfectionist, no?

 

[Ratman]

Get back to the top. More folks need to know about these great devices. Marcus had a day off, (I hope) time to bury him with more orders!!

How ya been Marcus? Have a good labor day? Sounds like the sale went pretty well. Been working on my video review for the vv now that I have had it a few weeks. Hoping it doesn't suck! LoL

 

[Ratman]

A little vapeporn courtesy of the man. Got my super mini in today. Love it already. Fits the hand so nicely and the seem is so well done that we had trouble getting Julie's door off. Now that's precision!!

 

[lalasalama8]

A little vapeporn courtesy of the man. Got my super mini in today. Love it already. Fits the hand so nicely and the seem is so well done that we had trouble getting Julie's door off. Now that's precision!!

View attachment 133659

lol..my new mini feeder has a super tight door as well...can hardly see the seam. Much better in the long run as a small amount of wood will get worn off. I find it best to "pretend" there is a hinge both taking it off and putting it on...Marcus rules!

 

[K*Rose]

A little vapeporn courtesy of the man. Got my super mini in today. Love it already. Fits the hand so nicely and the seem is so well done that we had trouble getting Julie's door off. Now that's precision!!

View attachment 133659

Beautimus! Can't wait til my mini feeder gets here!

 

[Mpetroski]

Get back to the top. More folks need to know about these great devices. Marcus had a day off, (I hope) time to bury him with more orders!!

How ya been Marcus? Have a good labor day? Sounds like the sale went pretty well. Been working on my video review for the vv now that I have had it a few weeks. Hoping it doesn't suck! LoL

I had about a half a day off on Monday and and managed to get caught up pretty good but after the sale I was definitely way back behind. I try to get as many in stock boxes done as I can but at least 70% of all my box orders are custom orders which I really prefer because my customers have the task of picking the woods instead of me lol.

 

[Mpetroski]

I am still trying to figure out my new stinkin' camera and how to get pics loaded here...now I guess I have new motivation to git r done..the first picture I will take and load will be this little beauty..thanks Ratman and I know you'll love your new minis too..that Marcus is quite the perfectionist, no?

I have been working with my new light box for pictures but I am still having a few issues getting the pictures to come out exactly like I want so the pictures I have of your mini bottom feeder are on the same background I was using.

 

[lalasalama8]

that's it!! better pics than I could've taken anyway..so waddyathink folks?..should Marcus put some of this wood combination on some in stock boxes..it's very very beautiful in persom

Hey Marcus, nice to see you again. I'm glad you're busy though..hope you're doing well..

 

[Mpetroski]

that's it!! better pics than I could've taken anyway..so waddyathink folks?..should Marcus put some of this wood combination on some in stock boxes..it's very very beautiful in persom

Hey Marcus, nice to see you again. I'm glad you're busy though..hope you're doing well..

I promise I will get better pics from now on lol. I used to make a bunch of boxes with snakewood but it has been pretty hard to come by any snakewood that has some really nice figure like your box has. I am always on the lookout though so I will be making more for sure. I can't figure out why but most of the time the ECF doesn't notify me when I get a reply or a PM so I am going to have to check on this thread a lot more from now on. The past two weeks have been pretty hectic because I am trying to get a bunch of stuff completed for the vape show in Albuquerque NM this weekend but I like it when I am busy because I am the type of person that can't sit still for more than about five minutes.

 

[lalasalama8]

I promise I will get better pics from now on lol. I used to make a bunch of boxes with snakewood but it has been pretty hard to come by any snakewood that has some really nice figure like your box has. I am always on the lookout though so I will be making more for sure. I can't figure out why but most of the time the ECF doesn't notify me when I get a reply or a PM so I am going to have to check on this thread a lot more from now on. The past two weeks have been pretty hectic because I am trying to get a bunch of stuff completed for the vape show in Albuquerque NM this weekend but I like it when I am busy because I am the type of person that can't sit still for more than about five minutes.

lol..somehow, I kinda guessed this

 

[Ratman]

Gorgeous mini there Marcus. Nice job on the wood choices bro. I can see why you are extra stoked about it.

 

[okcodemonkey]

In case anyone was wondering Bogger Boxes and Marcus are amazing! I typically use 510 LR attys on my boxes, but recently I bought some new LR 901 bridgeless attys and found they ran too hot and so on my VV mods I had to adjust down the voltage. I put these on my standard bottom feed Boggers and I am breathing fire! The heat and flavor are on par with a VV with 510 atty running at 4.5-5V. Now this isn't the same on other bottom feeders, as my Boggers have always hit harder. These things are beautiful, hard working, and affordable. And to top it all off Marcus gives some of the best customer support out of any vendor I have used.

I am definitely a Bogger fan!

 

[Mpetroski]

The Ebony and snakewood combination is by far my absolute favorite. One of the very first standard boxes I ever made was out of it and I immediately fell in love.

 

[Mpetroski]

In case anyone was wondering Bogger Boxes and Marcus are amazing! I typically use 510 LR attys on my boxes, but recently I bought some new LR 901 bridgeless attys and found they ran too hot and so on my VV mods I had to adjust down the voltage. I put these on my standard bottom feed Boggers and I am breathing fire! The heat and flavor are on par with a VV with 510 atty running at 4.5-5V. Now this isn't the same on other bottom feeders, as my Boggers have always hit harder. These things are beautiful, hard working, and affordable. And to top it all off Marcus gives some of the best customer support out of any vendor I have used.



I am definitely a Bogger fan!

Thank you for that, It is always nice to hear feedback from my customers and I am glad you are happy with your box.

 

[lalasalama8]

The Ebony and snakewood combination is by far my absolute favorite. One of the very first standard boxes I ever made was out of it and I immediately fell in love.
View attachment 134360View attachment 134361View attachment 134362

wow, those 2 woods look amazing no matter which way they're flipped...mmmm, a VV like this one...got me thinking again Marcus! Man, it would look so sweet next to my "flipped" mini...damn.

 

[K*Rose]

The anticipation is killing me!

 

[Ratman]

Heya Marcus, how was your vapemeet last weekend?

I see you are carrying a Phoenix style RBA on your site now. Did you mod these for bottom feeding or are they the standard sealed version?

 

[K*Rose]

I just got shipping notice on my mini feeder! Stoked!

 

[Mpetroski]

The rebuildable atty's I have are very similar to a phoenix type. I will be putting three separate types on my site which one of them is designed for bottom feeding. I am still in the process of machining the bottom feeder model though so I hope to have them on there very soon.

On a side note here are a couple pictures of some stabilized wood I am cutting up tonight.

 

[Ratman]

Very cool. I modded out a Phoenix clone yesterday. Drilled a hole through the bottom pin up through the floor and pressed in a ss needle. Set up a vertical coil cotton wick. Working very well but the draw is still too airy for my taste. I think I need to solder up the hole and drill a new one lower so it is more in line with the coil height. Got the suggestions and walk throughs on how to do it from some great members here on the site.

Be prepared to sell a ton of the them, especially the BF version. Big demand for them and ERA and chalice are only options and not easy to get.