[Closed]Unregistered Supplier : Bogger Box Mods

[y cherry y]

Fourthrock is very well versed in the little stick atomizers. It's the world of rba that she wants to enter. I started out on the Stick Atomizers and moved to rba. It's a totally different vaping experience. RBA is way better.

For me, the "little stick atomizers" are far superior for juices with complex or delicate flavors. It is a different vaping experience, and for me -- and many others -- RBA's come up short versus professionally made dripping atties. So to say "RBA is way better" is a generalization of the worst kind. They're better for YOU, but not at all for me.

 

[kabonk]

I guess everybody has a different experience because I feel the flavor is better on my ERA then with a mass produced atty

 

[04 Raider Rider]

Kabonk,you are correct.Everyone is different.It's all about what works for YOU.I get my atties from one source,they work well for me.I like the convenience of them.Check for DOA's when I get them,screw them on,vape 'til they die.Repeat : )

 

[y cherry y]

I guess everybody has a different experience because I feel the flavor is better on my ERA then with a mass produced atty

Yeah, everyone is different. For me, genesis atties reduce every juice to a concentrated essence of whatever the dominant flavor is. With juices that have multiple notes, only the loudest note comes through. With silica wicks, I can't get away from the taste of the silica. I am, however, trying different wicks still in the hope that something tastes right to me.

I prefer disposable atties for flavor. I find it hard to believe that anyone who has tried, say, an Empire Premium 901 truly believes an RBA tastes better. But if they do, I don't tell them they're wrong. We just have different taste, and we taste things differently.

 

[kabonk]

Kabonk,you are correct.Everyone is different.It's all about what works for YOU.I get my atties from one source,they work well for me.I like the convenience of them.Check for DOA's when I get them,screw them on,vape 'til they die.Repeat : )

I used to buy that 10 atty deal from vaperkings all the time there and greenhouse one had a killer price on atty's and my dna20 didn't show up today cry, sob cry some more I wish I had the tracking # so I could see where it was at but it will hopefully be here tomorrow I miss it so

 

[the_vape_nerd]

Hi all you bogger folks. i've been vaping 2 years now and want a bogger box. I have the money together etc but I have a few questions for you folks before I make an order for a custom feeder.

1. I want a dark red type wood for the main body with maybe a lighter inlay. I was considering the redwood lace with some lighter type wood for the inlay and caps. Anyone have a photo of something like this?

2. I've never owned a bottom feeder. How hard is it to learn the proper technique?

3. What are most of you using for attys? I can build a coil on an rda and all that but I'm not planning to go sub 1 ohm. Would a bridgeless cisco 510 be a decent choice? If you are using a rda on yours would you mind posting a photo? I'm looking to get the atty or the delivery system to be as small as possible so as to not take away from the beauty of the mod. I want something stainless to match the button and 510 connector, but that wont heat up to much. That's maybe asking a lot but vapers are brilliant innovators.

4. Do I need vv? Are you guys getting decent performance without it?

5. If I did get vv should i bother with the dna chip? Is it that much better?

 

[niczgreat]

Hi all you bogger folks. i've been vaping 2 years now and want a bogger box. I have the money together etc but I have a few questions for you folks before I make an order for a custom feeder.

1. I want a dark red type wood for the main body with maybe a lighter inlay. I was considering the redwood lace with some lighter type wood for the inlay and caps. Anyone have a photo of something like this?

2. I've never owned a bottom feeder. How hard is it to learn the proper technique?

3. What are most of you using for attys? I can build a coil on an rda and all that but I'm not planning to go sub 1 ohm. Would a bridgeless cisco 510 be a decent choice? If you are using a rda on yours would you mind posting a photo? I'm looking to get the atty or the delivery system to be as small as possible so as to not take away from the beauty of the mod. I want something stainless to match the button and 510 connector, but that wont heat up to much. That's maybe asking a lot but vapers are brilliant innovators.

4. Do I need vv? Are you guys getting decent performance without it?

5. If I did get vv should i bother with the dna chip? Is it that much better?

1. Can't Help

2. Bottom feeding is brain dead easy to learn the proper technique.

3. The Best RBA is the Reomizer 2. hands down. Very Very Easy to build compared with the rest. Great Vape.
Also the Reomizer is reasonably priced. I bought a ERA and a Cyclone [Both Bottom Feeding] and I like my Reo better.


In Stick Atomizers- Be sure to order the unsealed.
Empire Lr 1.8 is great
Avid has a Good Line too
The trick is that they have to specify that the 510 connection at the bottom is open.

4. You absolutely want the VV. It allows you to control the Volts that you vape with. So for example if you like your
1.8 Ohm at 4 from beginning to end you'll always be at 4
5. I have a Regular VV and love it. The only reason I bought the additional DNA20D is because I saw a video on it and it accepted and boosted Sub Ohm Coils. If you aren't a Sub Ohm Vaper there is absolutely no reason to pay the extra.

 

[kabonk]

Hi all you bogger folks. i've been vaping 2 years now and want a bogger box. I have the money together etc but I have a few questions for you folks before I make an order for a custom feeder.

1. I want a dark red type wood for the main body with maybe a lighter inlay. I was considering the redwood lace with some lighter type wood for the inlay and caps. Anyone have a photo of something like this?

2. I've never owned a bottom feeder. How hard is it to learn the proper technique?

3. What are most of you using for attys? I can build a coil on an rda and all that but I'm not planning to go sub 1 ohm. Would a bridgeless cisco 510 be a decent choice? If you are using a rda on yours would you mind posting a photo? I'm looking to get the atty or the delivery system to be as small as possible so as to not take away from the beauty of the mod. I want something stainless to match the button and 510 connector, but that wont heat up to much. That's maybe asking a lot but vapers are brilliant innovators.

4. Do I need vv? Are you guys getting decent performance without it?

5. If I did get vv should i bother with the dna chip? Is it that much better?

redwood lace body she a beaut right - I'm still waiting for her to come back home

 

[crshsnwmn]

Photo of my mini from the website, padauk & ipe.
Also have a dna20 ordered in padauk & afzelia burl, hoping to see it in about two weeks.
+1 on the reomiser 2, nearly impossible to flood, and no shorts with the ceramic floor.

 

[kabonk]

Thanks Marcus it's back home where it belongs, sorry for being such a pain in the .... but I was suffering from separation anxiety. I love my bogger

 

[fourthrok]

Thought I'd share a pic of my baby...but am having trouble doing it. Try another time . Sorry.

 

[MFToms59]

I received shipping notification for both DNA20'sMonday the 24th, one was ordered 4/28 & the second on 4/30... I still don't have any Tracking updates through USPS but I should receive them by Friday 5/28... looking forward to getting them...

Sadly I hadn't received them as of July 2nd, I was freaking out, thinking they were wedged behind some P.O. counter or bin since the tracking # wasn't showing anything!.

I sent an e-mail regarding my concern to Marcus, he apologized for not updating me, he was unhappy with the lacquer finish on one of the DNA's and redid it. I was ecstatic they weren't in purgatory somewhere waiting to be found!

I wish you all a Safe & Happy Independence Day

 

[niczgreat]

After trying everything the best vape I've found is on my VV Bogger Box, Reomizer Vs 2, with a FC-2000 Porous Ceramic Wick.

The FC-2000 isn't as absorbent as the Braided Ceramic and I have to squonk more often but I feel that it's giving me the purest flavor.

Also you only need a little piece on Reomizer 2 and I'm going on around 3 weeks with the same wick and coil.!

Yeah, everyone is different. For me, genesis atties reduce every juice to a concentrated essence of whatever the dominant flavor is. With juices that have multiple notes, only the loudest note comes through. With silica wicks, I can't get away from the taste of the silica. I am, however, trying different wicks still in the hope that something tastes right to me.

I prefer disposable atties for flavor. I find it hard to believe that anyone who has tried, say, an Empire Premium 901 truly believes an RBA tastes better. But if they do, I don't tell them they're wrong. We just have different taste, and we taste things differently.

 

[dmc0105]

Please check your email. I've been regularly emailing you regarding my problem. I know that once you shipped the package everything is on usps. What im asking now is there any reference number so i can check with usps directly. Its been more than a month from the day my order status changed to shipped. Order id 1503.

 

[the_vape_nerd]

well um just wanted to say i ordered a redwood lace burl with limba inlays and caps on july 3, can't wait

i would like to use a cisco 306 with long stainless steel drip tip on it...could one of you bogger vets give me an opinion on whether thats a decent choice in atomizer?

 

[Xobeloot]

Shipping shows my box made it to you for the new bits to be added on the 3rd. Any estimate on how long it will take to turn it around?

Thanks!

 

[Ratman]

well um just wanted to say i ordered a redwood lace burl with limba inlays and caps on july 3, can't wait

i would like to use a cisco 306 with long stainless steel drip tip on it...could one of you bogger vets give me an opinion on whether thats a decent choice in atomizer?

The cisco 306 is a quality premade and has a lot of fans! I never got the hang of the 306's myself but many swear by them. They take a special drip tip and get pretty warm so I am not sure how well the metal drip tip will work but the bigger it is the better for heat dissipation. Glass ones are the hot ticket with the 306 atty or plastic cannon styles from what I hear.

 

[Irwanizam]

where is the modder? its been too long and seriously unhappy answer for my boggerbox custom dna20. no detail shipping is given. Seriously i feel fXXk in this situation. i want my money back.

 

[maisey]

where is the modder? its been too long and seriously unhappy answer for my boggerbox custom dna20. no detail shipping is given. Seriously i feel fXXk in this situation. i want my money back.

I have recieved a response to my email query about my order less than a day after I emailed him last week. Did you use the contact us link on his site?

 

[Irwanizam]

I have recieved a response to my email query about my order less than a day after I emailed him last week. Did you use the contact us link on his site?

too many email has been sent using contact us via a website and he's never response. its not cheap. seriously i cannot accept this