[CLOSED]
- Thread starter Tbev
- Start date
- th_trl_thread_readers 0
- Status
Yeah that one is sick, Copper any titanium I really love together, that's why I'm doing the copper insert in the bottom of the TiMi's
Here's the titanium cap in a raw finish on the anodized micro.
Here's the titanium cap in a raw finish on the anodized micro.
This is for sure my favorite so far pops with a copper cap like this would be sick. I think I just did not like the carbon fiber on the other one. Looks nice just not my style and it does not pop out. I think it would look best over a light color like white or yellow.
Attachments
The engraving painted looks cool. I have been thing lattely about doing it reversed. As in taking a brass mod, do the lizard engraving, then paint it black, then sand off all the paint and just leave the paint in the engraving it's self would look killer. Just my thoughts every thing u do comes out nice my freind
That would look sick, but you can't paint in brass, for dinner reason it doesn't last I don't think.. I think it oxidizes right between the time I pull it out of the oven for degassing and actually painting it , that crap (oxidatiin) comes out from under the paint and screws it up, only happens in brass it's weird.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
I dont do engraving under paint very often, but this is fire it looks.
Tom...are you doing this to me on purpose???
I'm speechless!!!!!!!!!!...umm...is it possible to do this name engraving with mine??
Attachments
I'm leaning, but I'm doing my best to learn all the cool stuff haha! Btw, do you want larger or smaller honeycombs on your pattern Tom? Nut a huge difference, but I have a little bit of room to play with.
Hey tom. Quick quistion for you. The thump sits way off the top cap of the tmod. The 510 pin is allready screwed down to the point it is hitting the bottle cap. Will it brake the pin if I cut it with a cut of blade on a Drexel of die grinder? Or will it hurt the pin if I screw it down further and it goes down in to the bottle. I know the walls are pretty thin. And don't want to screw with it to much with out your opinion. The thump is going to be parked on there for awhile. Thanks brother
Attachments
Welcome on board Lush_P..glad to have someone to keep me company on the African continent...although I'm way up northThank you @Tbev
This is my first post on this forum and I have to say that these mods are EPIC
Meet Ying and Yang, the first TMods on the African Continent, specifically in South Africa
hey SZ,you can shove the bottle right up onto the pin,i have a few like that.you can cut the pin if ya want i guess.i havent botherd with it.push and a lil clockwise action and viola.also seals the bottleand tubing right tight.welcome Lush_P and glad to have ya!Lush_P.... ill let ya skate and not make any wisecracks on the first day here...lol.-Rick
Loosen the locknut first, then bring the pin down, make sure the contact is straight when you tighten it back up, it's a lock nut so it need not be very tight at all. You can cur it with the curing wheel I a Dremel, but you shouldn't have too, your pin can go into the bottle cap, it should be tight. Shoot me Ann email I'd your not fixed up already.
Sent from my SM-G900V using Tapatalk
Hey hey buddy.. Nice to see ya here! I live that pair, Ying n Yang, that's great haha!Thank you @Tbev
This is my first post on this forum and I have to say that these mods are EPIC
Meet Ying and Yang, the first TMods on the African Continent, specifically in South Africa
Sent from my SM-G900V using Tapatalk
I adjusted the pin down. Just wanted to make sure it was ok to stuff the pin down in the bottle cap before I did so. Is probauly about an 8th of an inch of the 510 post that goes down in the bottle now. As long as it's fine for the mod doesn't bother me none ya know brother. The connection on that thump is a long one for sure. On another note any way having problems with spit back for the thump I put the delrin tip with spit back protection on it from the aramizer works great. Does not block air flow and does not hit the top were the post screws are either. Only good thing I got out of that aromizer junk 3ml and 6ml version went in the trash almost emedietly after purchase.
- Status
Similar threads
