[CLOSED}

[TheKiwi]

Popping in to say I've received my maker (lol at long last)

I have to say, I'm surprised this hasn't gotten much love. The flavor and airflow is extremely good. Top airflow design is exactly how I like it.


Sent from my iPhone using Tapatalk

 

[Chowderhead1972]

@Chowderhead1972 tom, I tried emailing you about this rda, the mirage Evo, I'd want squonked, but I would only purchase one if you can manage it. Here is a link to the page. Fantastic looking little thing. Has a cup at the bottom that catches any juice that falls through the holes, then that juice will gradually get sucked right back up into the cotton. Has a couple other features that are even more interesting. If you need to know what type of pin it is, I will contact the owner of the company and find out. Thanks. MIRAGE E.V.O (Enhanced-Valve-Output) RDA by AB1 Mach

I got the email... After receiving I watched a few videos on it.... Got distracted (ADD sucks sometimes) and ended up going down the YouTube/Facebook rabbit hole. Three hours Into my rabbit hole expedition I got a phone call.... All hope of responding at that point was dashed. Sorry. On the bright side I don't see any problem bottom feeding the Mirrage but I'm very leery of bottom air attys even with an odd anti leak cup. Other observation this will be a loud atty; the air changes directions 3 different times. I would imagine the draw is going to be on the tight side which can be a good thing for flavor. I'll BF it for $30 plus shipping.

 

[Chowderhead1972]

Popping in to say I've received my maker (lol at long last)

I have to say, I'm surprised this hasn't gotten much love. The flavor and airflow is extremely good. Top airflow design is exactly how I like it.


Sent from my iPhone using Tapatalk

I was really surprised as well that it didn't do better. I think it comes down to looks, it looks like a cloud chaser but it most definitely isn't.

 

[havok333]

Popping in to say I've received my maker (lol at long last)

I have to say, I'm surprised this hasn't gotten much love. The flavor and airflow is extremely good. Top airflow design is exactly how I like it.


Sent from my iPhone using Tapatalk

I agree 100%! That's the RDA I take to work each day. [emoji1]

Sent from my XT907 using Tapatalk

 

[havok333]

I was really surprised as well that it didn't do better. I think it comes down to looks, it looks like a cloud chaser but it most definitely isn't.

If there's enough justification for another run, I'll be interested in probably (3) different colors.

Sent from my XT907 using Tapatalk

 

[Chowderhead1972]

If there's enough justification for another run, I'll be interested in probably (3) different colors.

Sent from my XT907 using Tapatalk

It will be ordered at the same time I order the Goons.

 

[beez0527]

It will be ordered at the same time I order the Goons.

Speaking of goons are you doing mine with the run (which is fine ) just wondering.

Sent from my SM-P607T using Tapatalk

 

[Chowderhead1972]

Speaking of goons are you doing mine with the run (which is fine ) just wondering.

Sent from my SM-P607T using Tapatalk

If I get time this weekend after finishing the first batch of self adjusting LBCs I will jump on the heap of send ins I have, just checked yours is among them. To be perfectly honest the new 510 is going well but starting over from scratch has been a lot more time consuming than I would have imagined not to mention forced overtime at my day (night actually) job and feeling run down 24hrs a day. Evidently those first 40 LBCs kicked my ICE.... Bodies are ready to be built (threaded, drilled, and tapped) 510s are all rebuilt and ready to install, braids are ready to solder in, currently they just need to be drilled for where they attach to the 510. I did modify them a little from the last pic that I posted. Now they are double thick at the 510 to make up for the missing material removed from drilling the 510 hole.

 

[beez0527]

If I get time this weekend after finishing the first batch of self adjusting LBCs I will jump on the heap of send ins I have, just checked yours is among them. To be perfectly honest the new 510 is going well but starting over from scratch has been a lot more time consuming than I would have imagined not to mention forced overtime at my day (night actually) job and feeling run down 24hrs a day. Evidently those first 40 LBCs kicked my ICE.... Bodies are ready to be built (threaded, drilled, and tapped) 510s are all rebuilt and ready to install, braids are ready to solder in, currently they just need to be drilled for where they attach to the 510. I did modify them a little from the last pic that I posted. Now they are double thick at the 510 to make up for the missing material removed from drilling the 510 hole.

No problem was just checking but now your making me want another lbc[emoji36] . I'm loving the first one it's a piece of art that vapes amazing.

Sent from my SM-P607T using Tapatalk

 

[goofy2302]

Hey tom, i don't know if this has been asked before....would you be able to retofit the first 20 with the self adjusting 510?

Also, is there any hope of another narda run....

Sent from my SM-N900T using Tapatalk

 

[laurie9300]

Hey tom, i don't know if this has been asked before....would you be able to retofit the first 20 with the self adjusting 510?

Also, is there any hope of another narda run....

Sent from my SM-N900T using Tapatalk

I have the 510, I have the tap, I have the iron, I have the skills, do I just need the braid?

 

[Houndb]

Tom will you be offering different doors and panels for the LBC? Also what about a white one?

A white one and I might have to have a forth one.

Have you thought about selling them as a six pack?

Keep up the great work.

 

[rbferg]

Hi guys, 1mm x 15mm Buna 70 or Viton 75 o-rings for the Stumpy cap? Looking to slightly tighten up one of my caps.

 

[liontos]

If I get time this weekend after finishing the first batch of self adjusting LBCs I will jump on the heap of send ins I have, just checked yours is among them. To be perfectly honest the new 510 is going well but starting over from scratch has been a lot more time consuming than I would have imagined not to mention forced overtime at my day (night actually) job and feeling run down 24hrs a day. Evidently those first 40 LBCs kicked my ICE.... Bodies are ready to be built (threaded, drilled, and tapped) 510s are all rebuilt and ready to install, braids are ready to solder in, currently they just need to be drilled for where they attach to the 510. I did modify them a little from the last pic that I posted. Now they are double thick at the 510 to make up for the missing material removed from drilling the 510 hole.

I order a Trump RDA BF whats the turn around time?

 

[Nautilusfan]

I order a Trump RDA BF whats the turn around time?

Welcome liontos

Probably be seeing the "Trump" version in early Nov

Sorry... I couldn't resist.

 

[Train2]

 

[inspects]

View attachment 572243

lmao Train.....

 

[inspects]

Welcome liontos

Probably be seeing the "Trump" version in early Nov

Sorry... I couldn't resist.

Good one Naut......

 

[Chowderhead1972]

View attachment 572243

I'd vote for that atty....

 

[inspects]

I'd vote for that atty....

I PLAN on....!