[CLOSED}

[turbocad6]

I agree a vert looks like it would make a lot of sense in the maker too, I never tried a vert in there, maybe next time I rebuild it I'll try it. my biggest apprehension to a vert is only having half the wicking potential, but then again a vert would allow a larger diameter coil too, so that would make up for the half wick... I'll try it next time

 

[distortoblotto]

Two wicks are better than one...

 

[Chowderhead1972]

Tom, I see that my check for the Tug cleared. Does that mean it's done? Sorry, I'm a bit excited/anxious,that one holds a special place in my heart. lol

I'll get it out Monday.

 

[Hank F. Spankman]

I'll get it out Monday.

Ty sir

 

[Chowderhead1972]

Last call on the Makers. I will be ordering these tomorrow(Friday) now's the time to bail if you aren't ready or have changed your mind. I will be ordering directly from this list and adding a few of the more of the popular colors.

Havok and anyone else that wants Maker RSAs lets do a list right here.
Be specific on what you want
1. Chowderhead1972 maker blue/ no logo/ stumpy bore
2. havok333 Maker blue/no logo/stumpy bore
3. havok333 Maker media blasted/stumpy bore
4. havok333 Maker grey/no logo/stumpy bore
5. Digital99 Maker blue/no logo/stumpy bore
6. LittleBird Maker blue/no logo/standard 510
7. LittleBird Maker black/no logo/standard 510
8. Slots Maker black/no logo/standard 510
9. Slots Maker black/no logo/standard 510
10. B2L Maker blue/no logo/ standard 510
11. ghola1was Maker red/no logo/standard 510
12. 67Tele Maker Black/Just Black/No logo/No snake-sies/standard 510 (revised finish again)
13. Irish Messing Maker SS/no logo/Stumpy bore
14. Irish Messing Maker SS/no logo/Stumpy bore
15. MFToms59 Maker media blasted/ No Logo/ Standard 510
16. Squonkoholic Maker SS/no logo/Stumpy bore
17. AllPepperS Maker/ Media blasted/no logo/ standard 510
18. Gigdujour Maker SS/no logo/std 510
19. MFToms59 Maker Grey Snakeskin/ no logo/ standard 510
20. ghola1was Maker SS/no logo/stumpy bore
21. Train2 Maker Black (just black, not snake or carbon), no logo, standard 510 bore
22. Paramaniac 413 blue no logo standard bore
23. BigTRAV710 Maker SS/no logo/standard 510

 

[Chowderhead1972]

How does it vape?

Sent from my XT1096 using Tapatalk

Better than most in its price range and authentic. Doesn't like to be over squonked.

 

[Nautilusfan]

Last call on the Makers. I will be ordering these tomorrow(Friday) now's the time to bail if you aren't ready or have changed your mind. I will be ordering directly from this list and adding a few of the more of the popular colors.

Havok and anyone else that wants Maker RSAs lets do a list right here.
Be specific on what you want
1. Chowderhead1972 maker blue/ no logo/ stumpy bore
2. havok333 Maker blue/no logo/stumpy bore
3. havok333 Maker media blasted/stumpy bore
4. havok333 Maker grey/no logo/stumpy bore
5. Digital99 Maker blue/no logo/stumpy bore
6. LittleBird Maker blue/no logo/standard 510
7. LittleBird Maker black/no logo/standard 510
8. Slots Maker black/no logo/standard 510
9. Slots Maker black/no logo/standard 510
10. B2L Maker blue/no logo/ standard 510
11. ghola1was Maker red/no logo/standard 510
12. 67Tele Maker Black/Just Black/No logo/No snake-sies/standard 510 (revised finish again)
13. Irish Messing Maker SS/no logo/Stumpy bore
14. Irish Messing Maker SS/no logo/Stumpy bore
15. MFToms59 Maker media blasted/ No Logo/ Standard 510
16. Squonkoholic Maker SS/no logo/Stumpy bore
17. AllPepperS Maker/ Media blasted/no logo/ standard 510
18. Gigdujour Maker SS/no logo/std 510
19. MFToms59 Maker Grey Snakeskin/ no logo/ standard 510
20. ghola1was Maker SS/no logo/stumpy bore
21. Train2 Maker Black (just black, not snake or carbon), no logo, standard 510 bore
22. Paramaniac 413 blue no logo standard bore
23. BigTRAV710 Maker SS/no logo/standard 510
24. Nautilusfan Maker Black/no logo/standard 510

 

[havok333]

Last call on the Makers. I will be ordering these tomorrow(Friday) now's the time to bail if you aren't ready or have changed your mind. I will be ordering directly from this list and adding a few of the more of the popular colors.

Havok and anyone else that wants Maker RSAs lets do a list right here.
Be specific on what you want
1. Chowderhead1972 maker blue/ no logo/ stumpy bore
2. havok333 Maker media blasted/stumpy bore
3. Digital99 Maker blue/no logo/stumpy bore
4. LittleBird Maker blue/no logo/standard 510
5. LittleBird Maker black/no logo/standard 510
6. Slots Maker black/no logo/standard 510
7. Slots Maker black/no logo/standard 510
8. B2L Maker blue/no logo/ standard 510
9. ghola1was Maker red/no logo/standard 510
10. 67Tele Maker Black/Just Black/No logo/No snake-sies/standard 510 (revised finish again)
11. Irish Messing Maker SS/no logo/Stumpy bore
12. Irish Messing Maker SS/no logo/Stumpy bore
13. MFToms59 Maker media blasted/ No Logo/ Standard 510
14. Squonkoholic Maker SS/no logo/Stumpy bore
15. AllPepperS Maker/ Media blasted/no logo/ standard 510
16. Gigdujour Maker SS/no logo/std 510
17. MFToms59 Maker Grey Snakeskin/ no logo/ standard 510
18. ghola1was Maker SS/no logo/stumpy bore
19. Train2 Maker Black (just black, not snake or carbon), no logo, standard 510 bore
20. Paramaniac 413 blue no logo standard bore
21. BigTRAV710 Maker SS/no logo/standard 510
22. Nautilusfan Maker Black/no logo/standard 510

 

[Chowderhead1972]

They look of decent enough size to me

Authentic and bottom fed for clone BF money. Stumpy meets the Drifter, with better hardware and bottom fed this thing could be a contender... What say you class? Should we do them? I haven't gotten pricing yet but for a sub $50 atty this looks like a crowd pleaser. Who would be in for one with a tentative price of $45?
1.

 

[Train2]

I'd kind of like to see reviews of that airflow - is it enough? Is it aiming air AT the coil or over? And I THINK it takes a standard size drip tip, but I'd like to see it confirmed...

I'll probably get on the list - but anyone seen reviews or used this yet??

View attachment 581045


Authentic and bottom fed for clone BF money. Stumpy meets the Drifter, with better hardware and bottom fed this thing could be a contender... What say you class? Should we do them? I haven't gotten pricing yet but for a sub $50 atty this looks like a crowd pleaser. Who would be in for one with a tentative price of $45?
1.

 

[havok333]

View attachment 581045


Authentic and bottom fed for clone BF money. Stumpy meets the Drifter, with better hardware and bottom fed this thing could be a contender... What say you class? Should we do them? I haven't gotten pricing yet but for a sub $50 atty this looks like a crowd pleaser. Who would be in for one with a tentative price of $45?

1. havok333

 

[ghola1was]

View attachment 581045


Authentic and bottom fed for clone BF money. Stumpy meets the Drifter, with better hardware and bottom fed this thing could be a contender... What say you class? Should we do them? I haven't gotten pricing yet but for a sub $50 atty this looks like a crowd pleaser. Who would be in for one with a tentative price of $45?

1. havok333
2. ghola1was

 

[havok333]

For that price it's worth trying out. Not sure how well the airflow angle thing will actually work, but willing to find out.

Sent from my XT1049 using Tapatalk

 

[Nautilusfan]

What size are the airholes?

 

[inspects]

What size are the airholes?

Kinda looks like the same size as the new top cap Dotmods offers for the Petri V2....which I ordered yesterday.....

 

[Slots]

Last call on the Makers.

Havok and anyone else that wants Maker RSAs lets do a list right here.
Be specific on what you want
1. Chowderhead1972 maker blue/ no logo/ stumpy bore
2. havok333 Maker media blasted/stumpy bore
3. Digital99 Maker blue/no logo/stumpy bore
4. LittleBird Maker blue/no logo/standard 510
5. LittleBird Maker black/no logo/standard 510
6. Slots Maker black (just plain black)/no logo/standard 510
7. Slots Maker black (just plain black)/no logo/standard 510
8. B2L Maker blue/no logo/ standard 510
9. ghola1was Maker red/no logo/standard 510
10. 67Tele Maker Black/Just Black/No logo/No snake-sies/standard 510 (revised finish again)
11. Irish Messing Maker SS/no logo/Stumpy bore
12. Irish Messing Maker SS/no logo/Stumpy bore
13. MFToms59 Maker media blasted/ No Logo/ Standard 510
14. Squonkoholic Maker SS/no logo/Stumpy bore
15. AllPepperS Maker/ Media blasted/no logo/ standard 510
16. Gigdujour Maker SS/no logo/std 510
17. MFToms59 Maker Grey Snakeskin/ no logo/ standard 510
18. ghola1was Maker SS/no logo/stumpy bore
19. Train2 Maker Black (just black, not snake or carbon), no logo, standard 510 bore
20. Paramaniac 413 blue no logo standard bore
21. BigTRAV710 Maker SS/no logo/standard 510
22. Nautilusfan Maker Black/no logo/standard

 

[Nautilusfan]

Last call on the Makers.

Havok and anyone else that wants Maker RSAs lets do a list right here.
Be specific on what you want
1. Chowderhead1972 maker blue/ no logo/ stumpy bore
2. havok333 Maker media blasted/stumpy bore
3. Digital99 Maker blue/no logo/stumpy bore
4. LittleBird Maker blue/no logo/standard 510
5. LittleBird Maker black/no logo/standard 510
6. Slots Maker black (just plain black)/no logo/standard 510
7. Slots Maker black (just plain black)/no logo/standard 510
8. B2L Maker blue/no logo/ standard 510
9. ghola1was Maker red/no logo/standard 510
10. 67Tele Maker Black/Just Black/No logo/No snake-sies/standard 510 (revised finish again)
11. Irish Messing Maker SS/no logo/Stumpy bore
12. Irish Messing Maker SS/no logo/Stumpy bore
13. MFToms59 Maker media blasted/ No Logo/ Standard 510
14. Squonkoholic Maker SS/no logo/Stumpy bore
15. AllPepperS Maker/ Media blasted/no logo/ standard 510
16. Gigdujour Maker SS/no logo/std 510
17. MFToms59 Maker Grey Snakeskin/ no logo/ standard 510
18. ghola1was Maker SS/no logo/stumpy bore
19. Train2 Maker Black (just black, not snake or carbon), no logo, standard 510 bore
20. Paramaniac 413 blue no logo standard bore
21. BigTRAV710 Maker SS/no logo/standard 510
22. Nautilusfan Maker Black plain/no logo/standard 510

 

[kingdal]

New
View attachment 581045


Authentic and bottom fed for clone BF money. Stumpy meets the Drifter, with better hardware and bottom fed this thing could be a contender... What say you class? Should we do them? I haven't gotten pricing yet but for a sub $50 atty this looks like a crowd pleaser. Who would be in for one with a tentative price of $45?

1. havok333
2. ghola1was
3. kingdal

 

[kingdal]

Hey guys, long time lurker here. I have a question for the people who have the first gen LBCs. I'm having some trouble making contact with some attys. Has anyone tried adjusting the 510 pin? How many turns can you raise the pin before it puts stress on the buss bar? Will you feel it getting stressed as you're turning the pin?

It looks straightforward enough, just real nervous about doing anything to this mod. Its all I use now and would hate to be without it

Thanks

 

[Clark F]

New
View attachment 581045


Authentic and bottom fed for clone BF money. Stumpy meets the Drifter, with better hardware and bottom fed this thing could be a contender... What say you class? Should we do them? I haven't gotten pricing yet but for a sub $50 atty this looks like a crowd pleaser. Who would be in for one with a tentative price of $45?

1. havok333
2. ghola1was
3. kingdal
4. Clark F