Coming Mid Week, Next Week - NEW VISION Victory BCC in All Colors

[dannoman]

Coming in all colors that you see above. This is a ProTank style Bottom Coil with a huge 5ml capacity. We will have heads also in all three available ohms.

Reports are coming back that you may be able to use EVOD and ProTank heads on these some of which, as has been reported, work as well and better than the native coil heads. We haven't been able to confirm this.​

 

[Adrena]

I may have to get one of these baby bottles now. Thank you Vision!

 

[trevor148]

If you take some more pictures of these when they come in. Can I get a picture of them on a mod? I'm thinking they would look better on something bigger than an ego.

 

[VapingTurtle]

I'm in!!!!

 

[rdsok]

If you take some more pictures of these when they come in. Can I get a picture of them on a mod? I'm thinking they would look better on something bigger than an ego.

I think they are just about eGo sized actually.. if that is the same one I saw today at one of the local B&M stores...

The B&M vape shops are popping up everywhere around here... I checked out 5 of them today all within 2-3 miles of each other. I didn't buy anything because none had a 14500 IMR battery ( and GV is out ).

 

[dannoman]

'twas a mistake- they are up now red sock...

I think they are just about eGo sized actually.. if that is the same one I saw today at one of the local B&M stores...

The B&M vape shops are popping up everywhere around here... I checked out 5 of them today all within 2-3 miles of each other. I didn't buy anything because none had a 14500 IMR battery ( and GV is out ).

 

[rdsok]

'twas a mistake- they are up now red sock...

Well... thank ya sir...

A bit late though... I've got a couple coming in from NEW YORK CITY... ya' know, by where they make that salsa stuff at...

They are going to be great for my....



( not to mention the Robust )

 

[yiddleboge6]

Yay!!!!! COLORS !!!! I think I NEED some of these

 

[mirthmgr]

5mL capacity? Yes, please.

The only question is, do I get some of the colors or all of the colors?

 

[dannoman]

We have them in all colors coming...

 

[Adrena]

I'm in!!!!

I will play nice

 

[harmonic]

Looks like the base has ego skirt which means it wont work on a mod or a robust without an ego adapter ...

 

[rdsok]

Looks like the base has ego skirt which means it wont work on a mod or a robust without an ego adapter ...

Which is why I have 510-eGo adapters aplenty. It's actually easier for me to list my eGo compatible MOD's than the 510 based ones

2 - Vamo's ( One chrome, one stainless )... and on these, certain eGo based Clearo's don't fit like the Kanger T3 series.
2 - 350mah eGo batteries
2 - Smoktech 14500 mod with the new head/switch



1 - PS Legacy
1 - Sigelei #20 ( all stainless )
1 - L-Rider Robust ( Blue )
2 - Bolt's ( one Chrome w/chrome switch and one Gunmetal both with 2 extentions )
2 - Joytech 510 220mah Auto's

 

[Adrena]

Looks like the base has ego skirt which means it wont work on a mod or a robust without an ego adapter ...

Should work in my Vamo (v2) or Sigelei zmax (v3) no? *crosses fingers*

 

[rdsok]

Should work in my Vamo (v2) or Sigelei zmax (v3) no? *crosses fingers*

On the Vamo it will depend... an example that doesn't is the Kanger T3, MT3, Mini-T3, and the T3s series... The plated Vamo's have issues with some of the Evod's but depend on the thickness of the plating... The Evods are fine on my Stainless but have the air choked off on the Chrome one

 

[Adrena]

realy want that yellow on my steampunked Sigelei.
My Vamo is the plated gunmetal one.

 

[harmonic]

Should work in my Vamo (v2) or Sigelei zmax (v3) no? *crosses fingers*

On the Vamo it will depend... an example that doesn't is the Kanger T3, MT3, Mini-T3, and the T3s series... The plated Vamo's have issues with some of the Evod's but depend on the thickness of the plating... The Evods are fine on my Stainless but have the air choked off on the Chrome one

Yea what he said LOL and its hard to tell with the supplied picture but there might also be a length issue if the base fits partway up unto the tank. Unlike the T3 series the tank is bigger around than the base and it "might" cover some of the skirt making the skirt shorter in which case it is possible it might not fit far enough into the well of some devices to properly make contact. But I am jus speculating on that based on what I can see in the pic. If it fits flush on the tank like the T3 stuff does then it might be fine on most of those mods.

 

[AG51]

Are they glass ?

 

[dannoman]

They sure look like glass but when I asked Vision they said no. But with translation who knows, maybe he meant to say yes - lol. I've had that happen before. Will find out for sure when they come in...

By the way the bottle nipple mouthpiece will fit more deeply and comfortably in your ear, I am sure you will have to have one of every color... >.>

 

[harmonic]

Since they are baby bottle shaped I would put my money on plastic. It would prolly be too hard to get a consistent shape with glass and for glass they would have to make it like the protank where the glass is straight and the shaped part would be metal.