Comrehensive Connector Compatability List

[olderthandirt]

Yes I looked folks, that I didn't find one doesn't mean it's not here somewhere but ...

Has anyone compiled a really comprehensive listing of OEM connector compatibility? I R not a modder, end-user only. With that..

Some time ago I found out that the 808 atty fits a 901 batt. And I recently found out that the 306 atty fits a 510 batt.

SCORE for me. Instead of buying a whole new setup I just get the atty and use with existing hardware. You get the drift...

What other inter-compatibilities like that exist that don't involve the use of adapters?

Thanks

 

[athlon14]

901 batts fit 510 also

 

[raven9mm]

901 batts fit 510 also

How is that? The 901 batt has male threads, and the 510 has female threads..

 

[MickiO]

M201 atomizer fits VP2, huge vapor clouds and screws together just like they were made for each other.

 

[SevTE]

Has anyone compiled a really comprehensive listing of OEM connector compatibility?

They have one at the e-cigarette-wiki dot com might be what you are looking for:

e-cigarette-wiki . com /index.php?title=Brand_and_Model_Compatibility_Chart

sorry, can't post proper links yet.

 

[olderthandirt]

They have one at the e-cigarette-wiki dot com might be what you are looking for:

e-cigarette-wiki . com /index.php?title=Brand_and_Model_Compatibility_Chart

sorry, can't post proper links yet.

Brand and Model Compatibility Chart - E-Cigarette Wiki

That's a good start. Example of the M401, and 510 comments cross-referencing the same threads is good...

 

[boondongle]

Just found that a DSE084 battery works with a 510 atomizer. It's not a perfect fit, as it can't screw in all the way, but I just used it and got vapor. The reverse, however, is not true. While a DSE084 atomizer will screw into a 510 battery, the positive connection in the center is recessed too far for the atomizer to connect. So the threads are the same, but the depth of the connection is not.

 

[opuscroakus]

Just found that a DSE084 battery works with a 510 atomizer. It's not a perfect fit, as it can't screw in all the way, but I just used it and got vapor. The reverse, however, is not true. While a DSE084 atomizer will screw into a 510 battery, the positive connection in the center is recessed too far for the atomizer to connect. So the threads are the same, but the depth of the connection is not.

Try the staple mod to see if it will make the connection.

http://www.e-cigarette-forum.com/fo...-center-conductor-gap-penstyle-atomizers.html

 

[boondongle]

No luck with the staple mod. I didn't actually have a staple handy, so I used a piece of solder, then a piece of wire. No luck either way.

 

[boondongle]

[Deleted post]