Still being kind of new to vaping I thought the new members forum was probably the best place for this.
My vape has been evolving since I quit smoking.
iTaste MVP with clearomizers to eGos with Kanger style tanks to mechanical mods, and Kayfuns, and RDAs which is where I am at now.
Was recoiling a couple of my rigs with twisted 32 gauge micro coils (8 wrap micro coils at 1.1-1.2Ohms) and had some twisted 32 gauge left over.
I have played around a bit with different styles of coils (Nano Dragon, Clapton, etc), and decided since I like the vape, and flavor I get from the twisted 32 gauge I would try wrapping a dual double diamond coil in a patriot clone RDA with the twisted 32.
Let the tails at the top form a 'cloud' of cotton right in the middle where I would be dripping.
Did 2 diamonds at 4 coils with 3 wraps per coil on a 1/16" drill bit for an ended Ohm reading of .85
Have to say I am liking it.
Great flavor. Not too hot. Good draws/drip ratio (8-10 drips for about 15-20 pulls). Good vapor production (not cloud chasing by any means but nice thick vapor).
Only drawback is it takes a second or two to warm up on a straight mechanical mod.
Some pics for you:
![IMG_3025[1].jpg IMG_3025[1].jpg](https://www.e-cigarette-forum.com/data/attachments/185/185663-d3c7f372d1c0ed893c070378e268d34c.jpg)
![IMG_3029[1].jpg IMG_3029[1].jpg](https://www.e-cigarette-forum.com/data/attachments/185/185664-dca6033fac512403e287b41c887d3475.jpg)
![IMG_3028[1].jpg IMG_3028[1].jpg](https://www.e-cigarette-forum.com/data/attachments/185/185666-70f5704f13cb97efec32295398a02388.jpg)
![IMG_3026[1].jpg IMG_3026[1].jpg](https://www.e-cigarette-forum.com/data/attachments/185/185668-954ecc3232c7469c62efd255a75bac99.jpg)
![IMG_3024[1].jpg IMG_3024[1].jpg](https://www.e-cigarette-forum.com/data/attachments/185/185670-e597e968599632db6f1ba97648f79327.jpg)
If you're into wrapping coils and dripping you might like this too.
Keep vaping
Nico
My vape has been evolving since I quit smoking.
iTaste MVP with clearomizers to eGos with Kanger style tanks to mechanical mods, and Kayfuns, and RDAs which is where I am at now.
Was recoiling a couple of my rigs with twisted 32 gauge micro coils (8 wrap micro coils at 1.1-1.2Ohms) and had some twisted 32 gauge left over.
I have played around a bit with different styles of coils (Nano Dragon, Clapton, etc), and decided since I like the vape, and flavor I get from the twisted 32 gauge I would try wrapping a dual double diamond coil in a patriot clone RDA with the twisted 32.
Let the tails at the top form a 'cloud' of cotton right in the middle where I would be dripping.
Did 2 diamonds at 4 coils with 3 wraps per coil on a 1/16" drill bit for an ended Ohm reading of .85
Have to say I am liking it.
Great flavor. Not too hot. Good draws/drip ratio (8-10 drips for about 15-20 pulls). Good vapor production (not cloud chasing by any means but nice thick vapor).
Only drawback is it takes a second or two to warm up on a straight mechanical mod.
Some pics for you:
![IMG_3025[1].jpg IMG_3025[1].jpg](https://www.e-cigarette-forum.com/data/attachments/185/185663-d3c7f372d1c0ed893c070378e268d34c.jpg)
![IMG_3029[1].jpg IMG_3029[1].jpg](https://www.e-cigarette-forum.com/data/attachments/185/185664-dca6033fac512403e287b41c887d3475.jpg)
![IMG_3028[1].jpg IMG_3028[1].jpg](https://www.e-cigarette-forum.com/data/attachments/185/185666-70f5704f13cb97efec32295398a02388.jpg)
![IMG_3026[1].jpg IMG_3026[1].jpg](https://www.e-cigarette-forum.com/data/attachments/185/185668-954ecc3232c7469c62efd255a75bac99.jpg)
![IMG_3024[1].jpg IMG_3024[1].jpg](https://www.e-cigarette-forum.com/data/attachments/185/185670-e597e968599632db6f1ba97648f79327.jpg)
If you're into wrapping coils and dripping you might like this too.
Keep vaping

Nico
Last edited: