DNA 200 Watt

[Darkly spectr]

ah yes so I discovered today that superglue does no work on plastic whatsover.

Messed with the screen for a hour trying to get it straight. gave up and taped it slightly crooked. it's mah own mod I dun care.

but yeah now to figure out how to make supports that will keep the chip in place.

 

[Carnage9270]

ah yes so I discovered today that superglue does no work on plastic whatsover.

Messed with the screen for a hour trying to get it straight. gave up and taped it slightly crooked. it's mah own mod I dun care.

but yeah now to figure out how to make supports that will keep the chip in place.

 

[Paul.K]

I also placed my order for the VS 200. I was at ecc today and tried it out. It felt good in my hand. Not too worried about the finish as I have two rdna's and they have held up well for me. No experience with lipo 3s but I carry 3-4 mods so no worries.

 

[Jeremy Schreiber]

I also placed my order for the VS 200. I was at ecc today and tried it out. It felt good in my hand. Not too worried about the finish as I have two rdna's and they have held up well for me. No experience with lipo 3s but I carry 3-4 mods so no worries.

How does the size compare to the rDNA40?

 

[Paul.K]

Slightly taller than the rdna but not a huge difference for me. It actually felt thinner but i use skins on my rdna's and the 200 didnt have one on it.

 

[skin_e1]

That's weird because in the vaporshark group that I am in they confirmed it was a 900mah

@Chris5135 I just had a chance to check the actual Vapor Shark website and they didn't answer the question about the LIPo MAH size yet and there are a bunch of people asking. I took a look at the website and it's vague as well. Were you referring about that Damien guy who said 1000mah? Cause he don't work there and the question has still not been answered, unless they deleted it. When I open up the visitor post there are people from Aug 13th asking. I'm still waiting on a review, but have a friend who likes the VS. Can you point me to the right spot maybe? thanks

 

[Spirometry]

900mah.
If you like huge mods with large lipos there many other choices. I like small mods, so either way its a compromise.
2 amp charging seems to somewhat make up for the smaller lipo.

I hope they didn't bypass the DNAs built in 1 amp charging system

 

[Chris5135]

@Chris5135 I just had a chance to check the actual Vapor Shark website and they didn't answer the question about the LIPo MAH size yet and there are a bunch of people asking. I took a look at the website and it's vague as well. Were you referring about that Damien guy who said 1000mah? Cause he don't work there and the question has still not been answered, unless they deleted it. When I open up the visitor post there are people from Aug 13th asking. I'm still waiting on a review, but have a friend who likes the VS. Can you point me to the right spot maybe? thanks

Sure, it was in the vaporshark mods and accessories group. I'm not sure if you are in the group or not so here is a screenshot.

 

[spacetime]

I just saw the Vaporshark 200 at ECC, pretty sure it's a 900mah. It's pretty awesome, can't wait to get mine.

[/MEDIA]

 

[skin_e1]

Sure, it was in the vaporshark mods and accessories group. I'm not sure if you are in the group or not so here is a screenshot.

Thanks No I'm not in that group I was just looking at their main page.

 

[Jeremy Schreiber]

Looks like Boxer just released information on their webpage about the dual 18650 133 watt DNA.

Boxer Mod 133W with Evolv DNA200 Temperature Control - Ginger Vaper

Its more expensive than the LiPo version though? Confused now..so many choices..

Edit: After thinking about it, it is really bugging me that the dual 18650 costs 50 dollars more than LiPo version. Obviously it's smaller, but with the LiPo version you're getting the battery and the mod, as opposed to the dual 18650 you just get the mod that is running 67 watts less and no batteries included. Would there be that much more going into development dollars to justify the price difference?

 

[IanDVaypes]

Looks like Boxer just released information on their webpage about the dual 18650 133 watt DNA.

Boxer Mod 133W with Evolv DNA200 Temperature Control - Ginger Vaper

Its more expensive than the LiPo version though? Confused now..so many choices..

Edit: After thinking about it, it is really bugging me that the dual 18650 costs 50 dollars more than LiPo version. Obviously it's smaller, but with the LiPo version you're getting the battery and the mod, as opposed to the dual 18650 you just get the mod that is running 67 watts less and no batteries included. Would there be that much more going into development dollars to justify the price difference?

Battery sled and contacts.

 

[Landman]

Looks like Boxer just released information on their webpage about the dual 18650 133 watt DNA.

Boxer Mod 133W with Evolv DNA200 Temperature Control - Ginger Vaper

Its more expensive than the LiPo version though? Confused now..so many choices..

Edit: After thinking about it, it is really bugging me that the dual 18650 costs 50 dollars more than LiPo version. Obviously it's smaller, but with the LiPo version you're getting the battery and the mod, as opposed to the dual 18650 you just get the mod that is running 67 watts less and no batteries included. Would there be that much more going into development dollars to justify the price difference?

The balance charging/monitoring has to be wired up a bit differently, so I would think this version does require a little additional work/cost - $50 worth? I'd doubt it...

 

[TheKiwi]

Looks like Boxer just released information on their webpage about the dual 18650 133 watt DNA.

Boxer Mod 133W with Evolv DNA200 Temperature Control - Ginger Vaper

Its more expensive than the LiPo version though? Confused now..so many choices..

Edit: After thinking about it, it is really bugging me that the dual 18650 costs 50 dollars more than LiPo version. Obviously it's smaller, but with the LiPo version you're getting the battery and the mod, as opposed to the dual 18650 you just get the mod that is running 67 watts less and no batteries included. Would there be that much more going into development dollars to justify the price difference?

Been hunting around for a Dna200 and I think this is it!!! Drools.


Sent from my iPhone using Tapatalk

 

[kalison]

I just saw the Vaporshark 200 at ECC, pretty sure it's a 900mah. It's pretty awesome, can't wait to get mine.

[/MEDIA]

So glad they finally got rid of that seam down the front.

 

[Darkly spectr]

I hope they didn't bypass the DNAs built in 1 amp charging system

And why not? Lipos can handle 2 amp charging easily.

 

[BlueridgeDog]

I am more interested in seeing how the screen ribbon was extended. 1 amp charging is plenty for me...have plenty of mods so charge time is moot. I understand that some folks will have only one and a fast charge is a good thing. Not putting it down.

 

[dwcraig1]

I am more interested in seeing how the screen ribbon was extended. 1 amp charging is plenty for me...have plenty of mods so charge ti frome is moot. I understand that some folks will have only one and a fast charge is a good thing. Not putting it down.

Since seeing that it has their Zip charging I think they used a daughter board similar to previous models. perhaps a ribbon attaches to the daughter board near it's center and the regular screen has a socket on the lower end of the daughter board that it attaches at. The way I picture this if it is indeed what they did then they must have removed the existing USB socket from the Evolv board. Just a guess.

 

[RainZG]

Anyone with a bit of knowledge can extend ribbon cable, it is not rocket sience. You can do it quite easy. Unsolder screen, solder wires to ribon and to board and you extended it.

 

[Croak]

Or simply source a pre-manufactured screen with a longer ribbon. And it looks to me like it's essentially the same display used on the large screen DNA40, so VS already has a source.