Do you fiddle with your thingy?

[OCD]

You know Chad I think these have a unique look to them on the eGo, kind of makes me think of the worlds fair spaceships or the space needle. Since they are so short though the almost fit. I like the 19s with a straight cone but one of these and the flared cone just seem to work together at least for me. I pretty much cover the battery with my hand so when actually using it there is just this tiny little tank showing.

Chuck, cant say for sure right now. I have so much to get finished before VapeStock and I was contacted today on three different large orders that we are trying to figure out where we can plug into the schedule. As soon as I can free a day to do a run of these we will put them up on the site. Could be this week or next but I dont think it will run any longer than that.

Waiting to get word on the Drip Tips, I thought we might have these this week but it looks like they might be out just a little yet.

Careful there Andy, you might end up needing to join a program, I think TJ is founding one

 

[OCD]

TJ, I am getting hammered (mainly by The Offspring) to do the Tiny Tank. The Halflings are like Hobbits or Dwarves, short and stout. The Tiny tank is more Elven tall and thin. These will be very thin walled and obviously more fragile tanks but there are quite a few folks who have been asking for this so I am going to do some in acrylic as soon as I get a little time, at least a few of them to see how they will work out then we will decide if we want to add them with our regular caps.

There is one more tank BAT that I want to get together just because it will suit a few folks but at 30mm diameter it will be far from the main stream so it will be the last. It is a perfect fit for 25*** series battery mods like the Stinger and BAM though so I will eventually get to it even if it is not a stellar performer in the store.

 

[GwenB]

Oooh a skinny thingy. Yippy!!!
Froto will be happy

 

[epage]

Yes, I'll order Tiny Tanks...

 

[eratikmind]

My newest configuration. A standard SS 22mm tank with a Diver lurking inside. This set-up rocks!!!!

- Andy . . . Challenge the day.

 

[OCD]

Looks pretty sharp Andy, is the Diver another Killer type device? Who is it from?

Gwen and epage, probably after VapeStock I will be able to get to the Tiny Tank. I know there are the less clumsy amongst us who can actually use things like fine china or crystal so there is a subset of the market for delicate tanks that we will cater to when the time is available.

 

[OCD]

TJ, got the incoming... Thanks. Been using one of the LR since yesterday and a little iffy on it. Seems like a very tight draw and quick to get burny if the heats too high. Pretty good as long as I can keep it turned down low enough which is below the bottom on a DNA20 of 7W which is about 3.7V with the 2ohm. To be fair I think the DNA20 should be able to turn down a little further than what it does. Been good on a straight battery or eGo VV down around 3.2 to 3.5V.

 

[Tjloa]

Cool glad you got them but did you make sure it was fully moist? I had that experience with them to when I first got them and learned I didn't get the wicking material wet enough to use. After I got them fully prepped I let them sit for a bit before I used and then it was fine. I also found that diff juices on the same cartos didn't work at the same volts some were higher and some lower.

 

[OCD]

Certainly TJ, I fiddle the crap out of it I also put some in the top until it would not take any more. Seems to be working a little better this morning but still not on the DNA20 devices because they only go down to 7W, now using it on a DNA12 Opus almost all the way down which is close to 5W. Its a fresh topoff on the tank and I added half a dozen drops or so inside and its workin good, will see if it trys to run back to lean.

I think that for the most part vaping style and liquid create huge variances in how a cartomizer performs from one person to the next. What works the bomb for one may be ok for the next so just finding what fits your MO is the key.

Thanks again, always love getting freebies

 

[GwenB]

Looks pretty sharp Andy, is the Diver another Killer type device? Who is it from?

Gwen and epage, probably after VapeStock I will be able to get to the Tiny Tank. I know there are the less clumsy amongst us who can actually use things like fine china or crystal so there is a subset of the market for delicate tanks that we will cater to when the time is available.

No rush. I'm giving the Ego's and my 19's to my husband. Got my new vamo and am ready for a 22.
So much for petite vaping.

 

[OCD]

Got a run of the Halfing tubes done and should have them up on the site soon Gwen... not exactly petite but compact anyhow One thing I like about these different sizes is the caps will fit any length tube so its easy and inexpensive for folks to be able to try different setups to find what they like.

I am getting quite a tank collection together myself, nothing near what TJ has, heck I dont think I am even up to Baditude yet but got an assortment going.

Oh yeah, got the White Washers in for all three sizes of tanks and they look great. The Blue material arrived last week and was sent out for cutting too, the Blue is a very light blue and I am curious to see how the look on a tank. Will get the White ones up when I do my updating.

 

[chadsmo]

OCD, curious if ill get an email when my order ships, I ordered on the 14th. I totally understand if you're busy and haven't gotten to it, just wondering is all.

 

[GwenB]

Got a run of the Halfing tubes done and should have them up on the site soon Gwen... not exactly petite but compact anyhow One thing I like about these different sizes is the caps will fit any length tube so its easy and inexpensive for folks to be able to try different setups to find what they like.

I am getting quite a tank collection together myself, nothing near what TJ has, heck I dont think I am even up to Baditude yet but got an assortment going.

Oh yeah, got the White Washers in for all three sizes of tanks and they look great. The Blue material arrived last week and was sent out for cutting too, the Blue is a very light blue and I am curious to see how the look on a tank. Will get the White ones up when I do my updating.

White rings...saweet!

 

[OCD]

Hi Chad, custom tubes are done on the weekend and ship on Tuesdays most of the time.

Lol Gwen, they do look sharp, nice change from the black.

 

[eratikmind]

Looks pretty sharp Andy, is the Diver another Killer type device? Who is it from?

Gwen and epage, probably after VapeStock I will be able to get to the Tiny Tank. I know there are the less clumsy amongst us who can actually use things like fine china or crystal so there is a subset of the market for delicate tanks that we will cater to when the time is available.

The Diver is available from Atmistque, which is located in Athens, Greece.

The Diver is similar to the Killer. It utilizes a ceramic cup for the coil/wick assembly. However, there is no flow control to fiddle with. It has a single hole on the tube body, liken to a regular cartomizer. Essentially, it's a rebuildable cartomizer. It has been vaping like a champ. How it self feeds without flooding is beyond my comprehension.

You should be receiving a bit more of additional traffic due to both the Killer and the Diver. Your tanks afford very clean and functional lines for these devices.

- Andy

 

[b0redagain]

Here is the 22mm SS on a Nemesis and Roller.

 

[roundrock]

I just popped the top off my tank while filling it. I was excited thinking that at last I can use the hundreds of extra o-rings I've received. But upon looking, I see that they're for the inner ring. I *think* the outer ring has stretched.

Help?

Hmmm--is the outer ring a "washer?"

 

[OCD]

There is both a washer and an oring on the outside of the caps, the washer is flat. There is a second oring inside the cap. The washer is a pretty thin piece of rubber so it will stretch around some but once the tank is together it should stay captive between the cap and glass doing its job of keeping them away from each other.

 

[OCD]

BA, those look great... I have a Poldiac too (noticed it in your sig) and I love it with a 350 and a Halfling 22 or the larger batteries and a Standard. Eventually I will pick up some more mechanical 18 series mods, Love the VV and VW stuff but the solid feel of the mechs and what should be lifetime use if well built make them attractive.

Andy, I looked but they didnt seem to be in stock. Is it a magnifying glass and tweezers rebuild? Those things seem impossibly small to be RBAs.

 

[roundrock]

Ohhh- now I understand. So I just pop it back on? This is a large 19mm tank and the carto fit more snugly than usual. Funny how different cartos vary.

On another note, I went to your website today seeking info, and I love the new anodized caps and the colored washers. I came thiiiiiiiis close to buying a couple! I already have 7 though, so I'll wait until the 19mm caps are available.

Thank you for the quick response, OCD.