Dvarw MTL RTA & MTL FL (clones)

[Janusz]

Got this today and the Berserker remains my favorite.

Biggest issue: the chamber side piece (with the wicking holes) doesn't fit on the deck right. I had to use a significant amount of force and a screwdriver to get it in and a bit of the oring is bulging out a bit over the edge - so that o-ring will be trash.

2. Noisy

3. Tight drip tip hole

4. Superfluous screw next to the airflow piece.

Otherwise the vape quality is good so it gets the number 2 spot under the berserker.

I had problem with the chamber side piece but not original one (with round smaller wicking holes) but with optional with bigger oval wicking holes... changed "O" ring and problem is gone... I suspect problem with drip hole being too tight can be also related to "O" ring on drip tip too "fat". On my Dvarw all my drip tips even from other tanks fit perfectly.

I do not know what you mean about Superfluous screw next to the airflow piece???

Draw on my Dvarw is quiet but I use only 2 mm insert so do not know if smaller berserker style give noise.

One thing I can complain is that threading on my is not very smooth (when I screw the deck I have to go back and forth and sometimes I feel a little noisy resistance... I like the vape quality (flavor and smooth draw) in this regard it wins over my Doggystyle but I do not like look... for me it looks kind of ugly and cheap... I love the look and simplicity of Doggystyle but from all my RTAs Dwarw competes for second place with Savour but first place still belongs to....... my Siren2

 

[ToolmanTexas]

Got this today and the Berserker remains my favorite.

Biggest issue: the chamber side piece (with the wicking holes) doesn't fit on the deck right. I had to use a significant amount of force and a screwdriver to get it in and a bit of the oring is bulging out a bit over the edge - so that o-ring will be trash.

2. Noisy

3. Tight drip tip hole

4. Superfluous screw next to the airflow piece.

Otherwise the vape quality is good so it gets the number 2 spot under the berserker.

Mine is tight also, from what I remember the authentic wasn't an issue in that regard. Plan on adding a couple in near future.

The screws next to the airflow allow disassembly to reach the insulators (you can remove the deck). I do this each month for a thorough cleaning in the ultra sonic.

 

[ToolmanTexas]

skip to 6:15 in this vid to see the Dvarw broken down for super cleaning.

 

[lil_buddy]

I had problem with the chamber side piece but not original one (with round smaller wicking holes) but with optional with bigger oval wicking holes... changed "O" ring and problem is gone... I suspect problem with drip hole being too tight can be also related to "O" ring on drip tip too "fat". On my Dvarw all my drip tips even from other tanks fit perfectly.

I do not know what you mean about Superfluous screw next to the airflow piece???

Draw on my Dvarw is quiet but I use only 2 mm insert so do not know if smaller berserker style give noise.

One thing I can complain is that threading on my is not very smooth (when I screw the deck I have to go back and forth and sometimes I feel a little noisy resistance... I like the vape quality (flavor and smooth draw) in this regard it wins over my Doggystyle but I do not like look... for me it looks kind of ugly and cheap... I love the look and simplicity of Doggystyle but from all my RTAs Dwarw competes for second place with Savour but first place still belongs to....... my Siren2

Many of the driptips I have would not fit in the tank I received.
I agree about the threading and the looks - well maybe my feelings about the looks aren't quite as strong as yours

 

[lil_buddy]

I got the dvarw to put in this ikonn thing - needed a long 22 mm tank.

 

[Chodi]

I ordered the gold plated version of the Dvarw some time ago from Fasttech and received it last week. All I can say is WOW. It arrived clean and looks as good as the photos on their website. This is a remarkable value. It fits together more smoothly than my Coppervape Dvarw's and come with a full bundle of inserts for mtl. It also comes with the oval juice holes which I prefer. This is the best value I have seen in a Dvarw but more important it fits together better than the CV. No sticking cap when you remove the build deck. Inserting the juice flow cap onto the build is a simple push rather than the struggle I have with those on the CV. I find on the CV I have to use a flat head screwdriver with force to get the juice flow piece to sit in place. Really a very tight fit. On this one it just pops in. After some digging I found that this version is made by Lysen. It seems if you want their SS version of this you have to order the multi tank version. It is so good I may do that even though I have no use for the other tanks. I am using this with some VV Superfine Nichrome Clapton wire at 2.25mm on the 1.4 airflow insert and it is heaven. Highly recommended.

 

[ToolmanTexas]

View attachment 753325

All of these options failed.. the Melo was cancelled out of stock.. the rest arrived and did not fit

Took one for team Dvarw LOL.

 

[fis1976]

Hi all,

I'm really looking forward getting a Dvarw but I have some doubts and I hope you can help me. The first thing and the most important is the draw. I really like a tight draw, I use the Siren 2 on 2nd hole, the Prime clone on the first and the Doggy almost closed, how is that compared to the 1mm or the 0,8? The 2nd thing is the flavor. I think @ToolmanTexas mentioned that the flavor from the 2ml is the better than the 5ml. I like the looks of the PC version but it only comes as 5ml, the PEI have 2ml, 3.5ml and 5ml versions. Is there too much of a difference in flavor? I can live with 3.5ml PEI tho .

Sorry my English and thanks in advance!

 

[ToolmanTexas]

Hi all,

I'm really looking forward getting a Dvarw but I have some doubts and I hope you can help me. The first thing and the most important is the draw. I really like a tight draw, I use the Siren 2 on 2nd hole, the Prime clone on the first and the Doggy almost closed, how is that compared to the 1mm or the 0,8? The 2nd thing is the flavor. I think @ToolmanTexas mentioned that the flavor from the 2ml is the better than the 5ml. I like the looks of the PC version but it only comes as 5ml, the PEI have 2ml, 3.5ml and 5ml versions. Is there too much of a difference in flavor? I can live with 3.5ml PEI tho .

Sorry my English and thanks in advance!

The .8 was too tight for me, the 1mm is perfect. I like a really tight draw, I got rid of my Prime because draw was not tight enough. You will be happy, my guess, with the 1mm or 1.25 that comes installed.

I like the 2 and 3.5, personally, but I'm kind of OCD on flavor. This thing is so cheap get some options
You can get the PC version in all 3 sizes:
FastTech - Gadgets and Electronics

 

[fis1976]

Thanks @ToolmanTexas I know this is a Coppervape topic but I'm leaning towards the Dvarw MTL V2 mentioned by @Chodi (but SS version not the gold one) not only because it's cheaper and has all the additions but from reading it looks like the build quality is much better. The only concern is the bigger oval holes on the chimney. As I mentioned I like tight draw and I don't know how it will affect the vaping.

Edit: also can anyone give some recommendations for small bore drip tips that will match the silver version (fast tech links please), I found only one I like but the bore diameter is unknown.

 

[ToolmanTexas]

Thanks @ToolmanTexas I know this is a Coppervape topic but I'm leaning towards the Dvarw MTL V2 mentioned by @Chodi (but SS version not the gold one) not only because it's cheaper and has all the additions but from reading it looks like the build quality is much better. The only concern is the bigger oval holes on the chimney. As I mentioned I like tight draw and I don't know how it will affect the vaping.

I've heard it is an excellent choice. The oval holes do not effect draw, only juice control. I prefer the oval.

Edit: also can anyone give some recommendations for small bore drip tips that will match the silver version (fast tech links please), I found only one I like but the bore diameter is unknown.

MTL narrow drip tip suggestion: FastTech Forums
Narrow-bore drip tips?: FastTech Forums

There are SO many, can be hard to find, especially not knowing what material and height you prefer.

Many of the tips will show the diameter, some don't unfortunately:

 

[fis1976]

I was editing my previous post but @ToolmanTexas was faster

Not only the oval holes on the chimney are bigger but also the air hole, I don't know if that will effect the vape experience, liquid consumption (not important for me) or none.

 

[ToolmanTexas]

I was editing my previous post but @ToolmanTexas was faster

Not only the oval holes on the chimney are bigger but also the air hole, I don't know if that will effect the vape experience, liquid consumption (not important for me) or none.

View attachment 760621

Pick up some of the air inserts to cover your bases.

 

[fis1976]

Once again thanks all for the input in this topic, after reading it again (and again ) I made my order and hope I’ll like the Coopervape Dvarw like my YFTK Prime and the Doggy. I also watched a video comparison (in Italian) of the original and the Coopervape and that also pushed me towards the Coppervape.

 

[jorisd1980]

Hi all!

Lately I’m noticing a small gap between the deck and the metal part of the tank.. Is that normal?


Verzonden vanaf mijn iPhone met Tapatalk

 

[Chodi]

Hi all!

Lately I’m noticing a small gap between the deck and the metal part of the tank.. Is that normal?


Verzonden vanaf mijn iPhone met Tapatalk

Change the o-ring. I have had to do that even on one that was new (I own 4).

 

[yakaki]

View attachment 760657 I made my order and hope I’ll like the Coopervape Dvarw like my YFTK Prime and the Doggy. I also watched a video comparison (in Italian) of the original and the Coopervape and that also pushed me towards the Coppervape.

I found the dvarw to have less of a saturated vape and less throat hit then the doggy,
I still really enjoy using it, with 1mm reducer the draw feels smoother than the doggy.
lets see what I feel about it when the honeymoon phase passes...

 

[jorisd1980]

Change the o-ring. I have had to do that even on one that was new (I own 4).

Cool, I’ll definitely own more of them in the future. I even put my Prime aside since the Dvarw. I’ll change the o-ring, thanks!


Verzonden vanaf mijn iPhone met Tapatalk

 

[Lalli]

I finally got my Dvarw clone from Fastech today, not by Coppervape but the cheap set that comes with 3 tanks and 5 extra air pins, white frosted plastic tanks plus one metal one. V2 and made by Lysen I think?

After a quick clean I put a basic build in it, deck is not as tiny as expected and easy to build. 28ga wire traps easily under the screws.

Put in a fair amount of cotton, primed and started vaping. I used the smallest air pin that should be 0,8mm. There is no numbers on them so just took the one that looked smallest.

Nice vape, not bad at all. Not as tight as expected but not too loose.
Good vapor and flavor, throat hit is a bit weak.

If it won’t start leaking and those plastic tanks hold up I think this one will be used a lot.

 

[fis1976]

I used the smallest air pin that should be 0,8mm. There is no numbers on them so just took the one that looked smallest.
Nice vape, not bad at all. Not as tight as expected but not too loose.

Now I'm worried