Hussar Project X RTA Clone (by Coppervape)

[ShowMeTwice]

Shhhhhhhhh ... it's been mighty quiet in these parts lately.

Just a mild bump to keep her going.

@stols001 did you ever get your Project X running?
come on already

 

[stols001]

Heh. I have it. I have not attacked it yet. I was thinking about it today. We shall see. Have not had brainpower for new RTAs other than finally building the Silverplay which seriously has the best FLAVOR.

I should do it. Soon. Maybe on New Year's Day.|

Anna

 

[vaper1960]

Have not had brainpower for new RTAs other than finally building the Silverplay which seriously has the best FLAVOR.

Hey, I'd love to hear about your experience with the Silverplay (which airflow adapter, did you close down juice flow slots, what coils ect) They are tricky but so versatile! I have two (one setup for loose MTL, the other for restricted DL)

 

[stols001]

I chose the middle one. I used a 2.5 coil that's about an 1.0 ohm. Spaced. I sort of shoved the juice flow in the middle. I totally aimed for the middle because I had no idea, so like, yeah, I have not even rewicked it yet, and it has seen some use.

I just naturally go for "the middle" when faced with situations like that,. I think it has something to do with my dialectical behavioral therapy training. LOL.

WHICH I NEED TO START USING IMMEDIATELY AT MY JOB. DUDE.

i'm gonna be filling out niightly worksheets. Yup.

Anna

 

[vaper1960]

Thanks for the info. I used the small hole insert, 26 ga 3mm round wire coil in one and larger hole insert, 3mm clapton in the other,,, both juice slots 1/3 way closed. Good flavor for sure.
I'm still very interested in the Project X also.

 

[johnpalley]

Hows it goin guys. Still loving my project x. I got a question, a while ago I ordered extra o rings for this from fast tech. I wanted to change them all out but I noticed they aren't matching. Im not seeing any big red o rings on my project x but in the replacement spare kit theres two big red o rings in there. These are the ones I ordered
$1.08 Coppervape Replacement Spare Kit for Hussar Project X RTA - 2*red o-rings + 5*black o-rings + 1*brown o-ring + 2*screws at FastTech - Free Shipping

Are there some big red o rings on this rta that im missing cause I dont see them?

 

[Guido Ceccotti]

Hi you guys.

I really love the flavor of my Coppervape Project X but I always end with juice in my mouth and there's a lot of condensation over and around the deck, even right after a fresh rewicking.

Am I doing something wrong?

Thanks.

2.5 mm ID. I don't comb or thin out the cotton, I just fluff it out.

 

[stols001]

Man I gotta get on mine, I have it. Looks terrifying. Nice coil. LOL.

Anna

 

[JustWondering1]

Hi you guys.

I really love the flavor of my Coppervape Project X but I always end with juice in my mouth and there's a lot of condensation over and around the deck, even right after a fresh rewicking.

Am I doing something wrong?

Thanks.

2.5 mm ID. I don't comb or thin out the cotton, I just fluff it out.

I have one tip for you on condensation. Make sure the drip tip you use has a larger inner diameter than the chimney. I don't have the Project X, and I don't claim to be an expert on vaping. I am just telling you what has worked for me with other devices.

Good luck and happy vaping!!

 

[Guido Ceccotti]

You're right. Maybe that's the problem. I'll try another driptip.

Thanks.

 

[Heartsdelight]

Hi you guys.

I really love the flavor of my Coppervape Project X but I always end with juice in my mouth and there's a lot of condensation over and around the deck, even right after a fresh rewicking.

Am I doing something wrong?

Thanks.

2.5 mm ID. I don't comb or thin out the cotton, I just fluff it out.

What wattage are you vaping at? From the pics even though the id is 2.5mm look like a large coil. Maybe try upping the wattage & thinning the wick ends a little.

 

[stylemessiah]

I shouldn't have seen this thread, that build deck looks interesting....

 

[Heartsdelight]

I shouldn't have seen this thread, that build deck looks interesting....

It’s a nice RTA especially if you like a restricted dl (I haven’t tried it in MTL) with the 4ml extension for me 2ml is not enough.

 

[stylemessiah]

It’s a nice RTA especially if you like a restricted dl (I haven’t tried it in MTL) with the 4ml extension for me 2ml is not enough.

Restricted DL is my jam

 

[Guido Ceccotti]

Yes. With the original driptip there is way less condensation. I don't like the low profile but, anyway, the top cap doesn't heat up so much and there's no problem with yor lips touching it.

 

[Guido Ceccotti]

What wattage are you vaping at? From the pics even though the id is 2.5mm look like a large coil. Maybe try upping the wattage & thinning the wick ends a little.

25 watts. I just solved the issue by changing the driptip. Thanks.

 

[ChelsB]

25 watts. I just solved the issue by changing the driptip. Thanks.

Nice when it’s an easy fix like that

 

[johnpalley]

Hows it goin guys. Still loving my project x. I got a question, a while ago I ordered extra o rings for this from fast tech. I wanted to change them all out but I noticed they aren't matching. Im not seeing any big red o rings on my project x but in the replacement spare kit theres two big red o rings in there. These are the ones I ordered
$1.08 Coppervape Replacement Spare Kit for Hussar Project X RTA - 2*red o-rings + 5*black o-rings + 1*brown o-ring + 2*screws at FastTech - Free Shipping

Are there some big red o rings on this rta that im missing cause I dont see them?

Id really like to get an answer on this guys if anyone knows?

 

[Guido Ceccotti]

I've found this tank pretty easy to wick. Just cut the cotton flush with the base, fluff it out and put it carefully inside the channels. Zero dry hits and excellent flavor.

 

[sxxxi]

Hi everyone! Can hussar X use the top part of X mtl or 1.5 rta? I really want a true top-fill instead of side-fill.