Dvarw MTL RTA & MTL FL (clones)

[Brewdawg1181]

So I have the Coppervape clone and it works just fine. Then I purchased this guy from fasttech.

https://www.fasttech.com/p/9652193

It was a great price and comes with all the inserts. Unfortunately, I have had nothing but problems thus far with this clone. To start, the Allen key did not fit the post screws. I replaced the post screws with the two extras that were included and they worked fine.

Then I installed a coil and filled the tank, and juice literally just pours out of the air slot! The o-rings were all lubed and look fine. I can't figure it out, but I am not very happy with this clone.

After some research, it appears that others are having the same issue with the deluxe version of this tank, but it is the same manufacturer Lysen. I am sure fasttech would stand behind the clone, but of course they want pictures. I am not sure how you could even document something like this with pictures. Here is a link to what may be the problem, but I don't really know for sure. Just a heads up for anyone considering the Lysen clones.

https://www.fasttech.com/forums/9652194/t/2731742/seeping-leaking-plus-pole/1

I won't buy a clone that's not "name brand." (never thought I'd say that before I vaped).
I've had SXK, YFTK, SJMY, and Coppervape for the Dvarw. Not a real problem with any of them. But I did try a couple of no-name clones before, and had pretty miserable experiences. The way I look at it, if they don't put their name on it (with the company they're copying!), then they're not real proud of it.

 

[vapdivrr]

To be fair, it could all be in my head, but I buy the premade Clapton wire, so it’s not like any more work anyway, yes it costs more, but not like I’m making a new coil every week.

It can be a tight fit in some atties like the dvarw though, but I make it work

I know what you mean...I really like rayon and use it 99 percent of the time, a few weeks ago I did a cotton build and swore the rayon was much better in flavor. I vaped the cotton for a few days and forgot which rta it was because I literally vape like between 7 to 12 different rtas each day and have multiples of the same tanks and mods. Anyways , last week i said to myself , self, which one is the cotton? I honestly didn't remember and after vaping the 4 possible devises, I couldn't detect any difference in flavor. I still dont know which one has the cotton, but when I knew which one it was, I could.....probably was in my head.

Sent from my SM-G960U using Tapatalk

 

[benley73]

So I have the Coppervape clone and it works just fine. Then I purchased this guy from Fasttech.

https://www.fasttech.com/p/9652193

It was a great price and comes with all the inserts. Unfortunately, I have had nothing but problems thus far with this clone. To start, the Allen key did not fit the post screws. I replaced the post screws with the two extras that were included and they worked fine.

Then I installed a coil and filled the tank, and juice literally just pours out of the air slot! The o-rings were all lubed and look fine. I can't figure it out, but I am not very happy with this clone.

After some research, it appears that others are having the same issue with the deluxe version of this tank, but it is the same manufacturer Lysen. I am sure Fasttech would stand behind the clone, but of course they want pictures. I am not sure how you could even document something like this with pictures. Here is a link to what may be the problem, but I don't really know for sure. Just a heads up for anyone considering the Lysen clones.

https://www.fasttech.com/forums/9652194/t/2731742/seeping-leaking-plus-pole/1

Ive had the lysen version Dvarw V2 MTL for several months now runs perfectly well for me,
I got the kit with all 3 tank sizes and airflow inserts in PC
then bought the pei tanks as well for using all juice types,
Never had a problem with it.
its branded with the larger wick juice holes at deck, im using the largest airflow insert
I use mainly plain SS 26g wire coils spaced its a really good vape,

Also run the Cloudone V3 boosted and V4 RTA, that has similar posts for coils ,
Nice small sized RTA ,
This does have adjustable airflow and topfill but you need the small tip bottle for filling id rate them very similar,

Also run the BY ka v7 RTA along side them , (OG)

Even got the 2 4mm DTL version of Dvarw now ,
This has option of wider bore or thinner chimney chambers and tank sizes , for dtl or mtl draws as well as deck airflow inserts, there is a nano clone of it available,

If i want a more open draw theres the TF gtV3 RTA,
been stella for several years for me, and the GT v4 or Gtv2 for tighter draw,

The Corona / Korina V8 RTA is also a good option now although its a 23 velocity deck for dual coil builds , it can be shut down pretty tight on airflow and now there is a new top cap that allows single coil and mtl option its got a one side reducer built into top cap with reduced single sided airflow,

The old Fev,s an the v4 is also a great option too quirky build style ,

 

[vapdivrr]

Ive had the lysen version Dvarw V2 MTL for several months now runs perfectly well for me,
I got the kit with all 3 tank sizes and airflow inserts in PC
then bought the pei tanks as well for using all juice types,
Never had a problem with it.
its branded with the larger wick juice holes at deck, im using the largest airflow insert
I use mainly plain SS 26g wire coils spaced its a really good vape,

Also run the Cloudone V3 boosted and V4 RTA, that has similar posts for coils ,
Nice small sized RTA ,
This does have adjustable airflow and topfill but you need the small tip bottle for filling id rate them very similar,

Also run the BY ka v7 RTA along side them , (OG)

Even got the 2 4mm DTL version of Dvarw now ,
This has option of wider bore or thinner chimney chambers and tank sizes , for dtl or mtl draws as well as deck airflow inserts, there is a nano clone of it available,

If i want a more open draw theres the TF gtV3 RTA,
been stella for several years for me, and the GT v4 or Gtv2 for tighter draw,

The Corona / Korina V8 RTA is also a good option now although its a 23 velocity deck for dual coil builds , it can be shut down pretty tight on airflow and now there is a new top cap that allows single coil and mtl option its got a one side reducer built into top cap with reduced single sided airflow,

The old Fev,s an the v4 is also a great option too quirky build style ,

Good info.....

Sent from my SM-G960U using Tapatalk

 

[Rockford]

Okay, after I've had a toot, if I blow into the air hole on the side, a puff of vape comes out the top.

 

[smoked25years]

What is the size of the hex key for the Dwarv? 1.3? 1.5? Other?

Thanks!

 

[MKID]

1.5mm

 

[smoked25years]

1.5mm

Thank you

 

[Lalli]

I've had a Lysen clone for sometime now, and only trouble I had was that the chimney stuck to the deck part, but a smaller o- ring fixed that.
It can leak if the juice holes are not completely covered with cotton. I use it with the smallest 0,8 mm reducer and it's one of the best MTL vapes you can get.

 

[Aurel72]

Good Evening everybody,

I have a question regarding the bell caps for the dvarw.
Does anybody have experience about how long bell caps last in relation to the threads ???
Are they worth it or wouldn't they last long enough.

 

[smoked25years]

Just saw that a clone of the 16mm is already available--that was fast! The idea of pairing it with the Pico Baby is interesting for an on the go vape.

 

[vapdivrr]

You mean like the steam tuners tank? I have 2 for the darvw and so far no issues. You do need to be slow and careful threading and if you do, they should last a long while

Good Evening everybody,

I have a question regarding the bell caps for the dvarw.
Does anybody have experience about how long bell caps last in relation to the threads ???
Are they worth it or wouldn't they last long enough.

Sent from my SM-G960U using Tapatalk

 

[benley73]

Just saw that a clone of the 16mm is already available--that was fast! The idea of pairing it with the Pico Baby is interesting for an on the go vape.


View attachment 784823 View attachment 784825

Yeah will definitely be trying the 16mm when it comes out, hopefully they offer the beauty rings for them too,
Im on hunt for a silver Lost vape EPetite 60w mod now, to house one of my Dvarw RTA,s,
Cloudone v4, on SD nano dna 60, (well used tatty paint) but works a treat,
Dvarw v2 MTL on VG v2.1 mech,

Sent from my ONEPLUS A3003 using Tapatalk

 

[vapdivrr]

I'm seeing mention of the darvw v2, didnt know that was a thing. What's the difference from a v2 to the v1? Is it simply the difference of the juice hole being bigger? I do have a clone with the small round hole and authentics with the oval, bigger hole , so perhaps that's it.

Yeah will definitely be trying the 16mm when it comes out, hopefully they offer the beauty rings for them too,
Im on hunt for a silver Lost vape EPetite 60w mod now, to house one of my Dvarw RTA,s,
Cloudone v4, on SD nano dna 60, (well used tatty paint) but works a treat,
Dvarw v2 MTL on VG v2.1 mech,

Sent from my ONEPLUS A3003 using Tapatalk

Sent from my SM-G960U using Tapatalk

 

[ToolmanTexas]

Just saw that a clone of the 16mm is already available--that was fast! The idea of pairing it with the Pico Baby is interesting for an on the go vape.


View attachment 784823 View attachment 784825

I ordered an authentic one, but I'm sure I'll add a couple of these clones for backup, etc.

 

[leekeylee]

Hi all

I love the Darvw MTL 22mm but I am getting a little frustrated with the poor orings, mainly the one that goes around the “cap” that you put onto the base after building a new coil, it always ends up part out. it still vapes well but the oring is getting mashed.

Can anyone link to the correct spare orings for this so I have spears

Thank you

 

[smoked25years]

Hi all

I love the Darvw MTL 22mm but I am getting a little frustrated with the poor orings, mainly the one that goes around the “cap” that you put onto the base after building a new coil, it always ends up part out. it still vapes well but the oring is getting mashed.

Can anyone link to the correct spare orings for this so I have spears

Thank you

$1.84 Coppervape O-ring + Screw Kit for Dvarw MTL RTA Atomizer (2-Pack) 2-pack at FastTech - Worldwide Free Shipping

 

[leekeylee]

$1.84 Coppervape O-ring + Screw Kit for Dvarw MTL RTA Atomizer (2-Pack) 2-pack at FastTech - Worldwide Free Shipping

Thank you

 

[Rockford]

Hi all

I love the Darvw MTL 22mm but I am getting a little frustrated with the poor orings, mainly the one that goes around the “cap” that you put onto the base after building a new coil, it always ends up part out. it still vapes well but the oring is getting mashed.

Can anyone link to the correct spare orings for this so I have spears

Thank you

Are you talking the little cap that sits on top of the chimney or the o-ring on the chimney? Mine on the chimney gets kinda mashed when I have to use force to get is seated. I've ordered that pack as well. Also make sure you're juicing the o-rings first.

 

[bask]

Just saw that a clone of the 16mm is already available--that was fast! The idea of pairing it with the Pico Baby is interesting for an on the go vape.

I really want to put it on a Dicodes Tiny. Just wish it would be the Dvarw 17, though.

I ordered an authentic one

That was my plan until I ran into finance problems and now they’re sold out, so I’ll probably pre-order a clone to try out, as well. Please let us know how it performs.