eBaron Dripper Pro

[joeshark]

Curious to find out about mesh & kanthal also. Seen a silent vid on YouTube from a guy putting a dripper through its paces with mesh, looks good, but no instructions on how to.

Sent from my Galaxy Note II using Tapatalk

 

[SheerLuckHolmes]

Just received my Ebaron Dripper Spiral this morning. Using the 2.1 ohm coil already installed at 4.2 volts. I dripped 15 drops of 18MG Apple Pie 50/50 down the sides of the tip. Really feeling the nic. Ummpa! Nice vapor clouds. Flavor good as well. Going to have to cut the nic level in this juice. Oh my.... Got 10 good vapes before the first indication of drop off. Nice, very nice dripper. This is a winner.

 

[AnsonJames]

Just received my Ebaron Dripper Spiral this morning. Using the 2.1 ohm coil already installed at 4.2 volts. I dripped 15 drops of 18MG Apple Pie 50/50 down the sides of the tip. Really feeling the nic. Ummpa! Nice vapor clouds. Flavor good as well. Going to have to cut the nic level in this juice. Oh my.... Got 10 good vapes before the first indication of drop off. Nice, very nice dripper. This is a winner.

Got mine earlier this evening - clouds at 3.7 volts with a 1.9 ohm coil.
Gave me the nic dizzies!

 

[misplacedsooner]

got mine today also..thanks 405 vaperz in okc!!!

 

[Dj Lee]

Any vids in English on how to create your own coils? Also is there anywhere where you can buy premade coils for this thing. 405vapors is out.

 

[polocsun544]

Does anyone know how this compares to the Fatty v2? Sounds like taste and TH are on par with the fatty. I might pull the trigger on an ebaron dripper and put the fatty on the classifieds.

 

[SheerLuckHolmes]

I have both, the Ebaron dripper & the Fatty V2. Love them both. Dripper seems to hold more juice, therefore, more drags between dripping. Of course that depends on the amount of wick you build into the Fatty. I built my Fatty wick for tasting juice only. So very short wick, cut very close to each end of the coil.

 

[Koman]

got mine today also..thanks 405 vaperz in okc!!!

Looks nice man!

 

[Thrasher]

still lovin mine, if im not using my cobra im drippin in the pro, makes me woozy from extended usage lol like SB at ecigreview says "Gives me a nice little kick in the back of me throat"

 

[ALPHA Q]

a friend of mine just got his recently and wanted to know what he has to do when he changes his juice
1: does he just drip the new juice in till the old juice flavor goes away
2: use a different wick for each juice
3: can he take the whole system and just wash it w/hot water and let dry after
would submerging the ebaron under hot water ruin the mod?
also how does he clean the ebaron

 

[Thrasher]

i choose number one. just run the new juice till it works through, usually i will vape the old juice till i get the dry burn taste then just start dripping the new stuff. about the second fill it all new juice.

 

[misplacedsooner]

ive been wondering about if you can rinse and clean the wicks too

 

[Thrasher]

sure every few days, i usually open it up and rinse it real good, shake off the excess water and do a few burns .

 

[misplacedsooner]

sure every few days, i usually open it up and rinse it real good, shake off the excess water and do a few burns .

thanks thrasher, ive been going on this coil and wick for a couple weeks now so im overdue.

 

[Thrasher]

couple weeks lol - mmm cakey wicks. i love it, one of the best drippers to date for me , i sit in the car at lunchtime at work and pound out some happy vapor time.

 

[zell666hell]

I'm enjoying my eBaron on my GGTS. I'm running dual coils on mine (Bishopheals dual highlander style) but I used Avid Vaper's premade coils, 2 x 2ohm = 1ohm. And after some break-in time the vape is moist warm and tasty.

 

[alanyourmouth]

I'm enjoying my eBaron on my GGTS. I'm running dual coils on mine (Bishopheals dual highlander style) but I used Avid Vaper's premade coils, 2 x 2ohm = 1ohm. And after some break-in time the vape is moist warm and tasty.

Curious to see your setup there. Just ordered mine from GREEK-VAPES

I'm hoping mine comes in low resistance. But anyways has anyone else been rebuilding coils? And sounds like the wicks are washable? Correct me if I'm wrong.

 

[Thrasher]

wicks are washable and dry burnable easy as pie. i take the top off rinse, burn and go. and the resistance is usually dead on for the rating (from house of mods anyways)

I have a rebuilt wick sitting here with 3mm wicks but havent had a reason to try one yet the one i put in a few weeks ago is still pounding along fine.

 

[chadsmo]

I ordered my provari mini and dripper pro on the same day. The provari won the shipping battle cause it was in the same province as opposed to Greece lol. That being said it entered Canada two days ago, so I hope to have it for Tuesday , pretty excited.

 

[nj1001]

wicks are washable and dry burnable easy as pie. i take the top off rinse, burn and go. and the resistance is usually dead on for the rating (from house of mods anyways)

I have a rebuilt wick sitting here with 3mm wicks but havent had a reason to try one yet the one i put in a few weeks ago is still pounding along fine.

I find that with any atty the longer I use it and the more it gunks up the higher the resistance grows with time. Do you find that after rinsing it drops the resistance back down? e.g. the house of mods low res I'm running now I have been running for a week or two and its up to 2.5ohms. Your thoughts?