eGo and 808 clearos that work on the X2 battery (revisited)
- Thread starter Garemlin
- Start date
- th_trl_thread_readers 0
- Status
Oh it will. It is like a whole new world. The first time I used one was with Tribeca. First few puffs and I forgot all about ever using a carto again.
Just got my t4s today, loaded up some niquid apple and it was totally different.
Got some mbv juices in the mail to try, razzleberry, blood orange and double apple. Can't wait to get them
Got some mbv juices in the mail to try, razzleberry, blood orange and double apple. Can't wait to get them
I just made my first order for both the Tribecca and Voodoo juices as well as 3 of the T4's. Will let you know what I think!!
Love Tribeca. On my 5th 30ml bottle since I started on liquids four months ago. And it is not the only liquid I use. Curious about your thoughts on Voodoo.
Tap'd from my Razr Maxx
I ordered a few T4s yesterday and can't wait to try them out. If I like the Esmarts, I'm sure I'll love these too. Can't have too many little clearos for my little 78s.
True, but a $1 cheaper than Halo...and they come in colors. Throw in a something like a 20% off sale and Volt points and combining the shipping cost with other items...well, you see where I'm going.
True, plus with the multitude of 15% off coupons it's not really much of a difference unless you're really stocking up.
$2.55 vs $2.25
Tribeca is impossible to pin down because it is so complex. I have yet to find a way to describe it except it is addicting and yummy as hell. Nothing like RY4. But if you like RY4 I would highly suggest you try ECBlend RY7. It is my second favorite next to Tribeca.
Ok i got a set up that works looking for input,
i got a SI X2 battery 900
bought a Kangertech Mini Protank 2
didnt fit right off the bat because of the center post being too high so i loosened the coil head just a tad and put a rubber stopper at the bottom of the batterys ego threads to give the tank a bit of a lift and it seems to be working fine with 2.5 ohms coil heads from Kangertech but seems like they burn out within a couple of days. Is it because they work that way or do i mabe need a lower ohm? or is it because its not ment to be compatible? Im Vaping SI Menthol Burst 18mg
i got a SI X2 battery 900
bought a Kangertech Mini Protank 2
didnt fit right off the bat because of the center post being too high so i loosened the coil head just a tad and put a rubber stopper at the bottom of the batterys ego threads to give the tank a bit of a lift and it seems to be working fine with 2.5 ohms coil heads from Kangertech but seems like they burn out within a couple of days. Is it because they work that way or do i mabe need a lower ohm? or is it because its not ment to be compatible? Im Vaping SI Menthol Burst 18mg
What exactly do you mean when you say your coils burn out in a couple of days? Do they quit working completely?
I use 2.2 and 2.5 ohm Kanger coils all the time. They usually last 2 or 3 weeks, sometimes more. If you want to use a mini Protank, I'd recommend using an adapter with your X2 batteries, or just get some regular eGo batteries.
J.R.
After a couple of days it starts to taste burnt and when i go to clean the coil i see the wick is black. and where is a good site to get good EGO batts . im kinda on a budget and cant afford crap products. but any ego batt should work as long as has a longer post if im right?
I don't like to post a link to a different vendor's website on S.I.'s forum.J.R.
If you're gonna go that route (regular eGo batt), at least look for one with constant voltage output (like eGo-C and EVOD batts), or better yet, an eGo-C Twist or Spinner. Most of the cheaper ones start out at 4.2V from the charger and quickly wimp out to 3.3V, so you might be able to find your happy spot for like 10-20 minutes. All the posts are the same (they all have 510 connections - SI X2 has 808).
If you're gonna keep using the mini PT on the X2 without an 808>eGo adapter, never ever forget that you can't screw it on all the way. If you do, you could push the batt post in too far and knock out the welds inside the batt.
2.5 ohms on and X2 sounds OK to me, especially with SI liquids. Maybe it's the way you vape? Chain-vaping hard, maybe? It's OK to do that, but maybe keep some extra heads around so you can rinse them out more frequently. I vape super-sweet dessert liquids on 2.4V Kanger heads at 3.8-4.1V on my SI Spinners, and get about 4-5 fills on my EVODs before I have to rinse them out. I also have 50 extra heads.
If you're gonna keep using the mini PT on the X2 without an 808>eGo adapter, never ever forget that you can't screw it on all the way. If you do, you could push the batt post in too far and knock out the welds inside the batt.
2.5 ohms on and X2 sounds OK to me, especially with SI liquids. Maybe it's the way you vape? Chain-vaping hard, maybe? It's OK to do that, but maybe keep some extra heads around so you can rinse them out more frequently. I vape super-sweet dessert liquids on 2.4V Kanger heads at 3.8-4.1V on my SI Spinners, and get about 4-5 fills on my EVODs before I have to rinse them out. I also have 50 extra heads.
If you're gonna go that route (regular eGo batt), at least look for one with constant voltage output (like eGo-C and EVOD batts), or better yet, an eGo-C Twist or Spinner. Most of the cheaper ones start out at 4.2V from the charger and quickly wimp out to 3.3V, so you might be able to find your happy spot for like 10-20 minutes. All the posts are the same (they all have 510 connections - SI X2 has 808).
If you're gonna keep using the mini PT on the X2 without an 808>eGo adapter, never ever forget that you can't screw it on all the way. If you do, you could push the batt post in too far and knock out the welds inside the batt.
2.5 ohms on and X2 sounds OK to me, especially with SI liquids. Maybe it's the way you vape? Chain-vaping hard, maybe? It's OK to do that, but maybe keep some extra heads around so you can rinse them out more frequently. I vape super-sweet dessert liquids on 2.4V Kanger heads at 3.8-4.1V on my SI Spinners, and get about 4-5 fills on my EVODs before I have to rinse them out. I also have 50 extra heads.
Yea im just gonna buy a Ego bat for the KTPT2 , saw one that is etched metal and is only 15 bucks, kinda wanted a 2nd bat anyways as i have alot of fruity liquid. sucks because its not SI but ill still be rocking SI and the Mini T3s's for the offball flavors. the Mini Protank 2 is too awesome to toss out or unsleeak it with an adapter. Thanks for the input peoples
Yea im just gonna buy a Ego bat for the KTPT2 , saw one that is etched metal and is only 15 bucks, kinda wanted a 2nd bat anyways as i have alot of fruity liquid. sucks because its not SI but ill still be rocking SI and the Mini T3s's for the offball flavors. the Mini Protank 2 is too awesome to toss out or unsleeak it with an adapter. Thanks for the input peoples
I don't know if that etched battery is regulated(constant voltage), or when they'll have it back in stock. I'd ask DV about it. If its not regulated, you might want to get some lower resistance coils for your mini PT
.J.R.
Last edited:
I don't know if that etched battery is regulated(constant voltage), or when they'll have it back in stock. I'd ask DV about it. If its not regulated, you might want to get some lower resistance coils for your mini PT
J.R.
Ok i know this is the wrong thread for this question, but on that subject would you say a VV twist battery would be best for the KTMPT 2? i would rather have more options, because i was looking into getting a VV
- Status
Similar threads
- Locked
- Locked
