Just wondering type of tank, atty, carto, you enjoy with this battery. What ohm and voltage combo you find works best for you. Thanks.
- Status
If you value form, something like a phoenix rebuildable atomizer, or a mini vivi nova would look best. as long as you don't go for anything too wide it will look cool imo, otherwise you'll walk around with a scepter 
since I've only been vaping for a month I do not have much gear, the two I mentioned are the ones I use. Since I do my own coils, they always end up in the 1.5 -2 ohm range, so I generally vape between 3,7 and 4 volts on my ego twist.
since I've only been vaping for a month I do not have much gear, the two I mentioned are the ones I use. Since I do my own coils, they always end up in the 1.5 -2 ohm range, so I generally vape between 3,7 and 4 volts on my ego twist.
Last edited:
I need something I can stick in my jeans front pocket so larger tanks are out for me.
I've had GREAT luck with Gotvapes Phoenix XL's. They only hold about 1ml, but I can stick several in my pocket and have never had one leak.
GotVapes PHOENiX REBORN Bottom Coil XL 1.5ml Carto 2.4-2.6ohms [gv-PHOENIX-XL-2.4-510] - $11.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more
I've had GREAT luck with Gotvapes Phoenix XL's. They only hold about 1ml, but I can stick several in my pocket and have never had one leak.
GotVapes PHOENiX REBORN Bottom Coil XL 1.5ml Carto 2.4-2.6ohms [gv-PHOENIX-XL-2.4-510] - $11.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more
Welcome , but as a new user , I would leave the Phoenix Re-buildables alone for awhile . And the Gotvape stuff is on the pricy side , IMO . and quite frankly , the customer service has been failing lately . The Mini Vivi_nova is your best bet . And as for voltage , on mine I use a 2.0 Vivi @ 4.2 volts . It rocks . Lots of vapor , and taste . And their pretty cheap too .
I've generally vape 2.4 ohm clearomizers at around 4.0-4.2 volts. Vision repairable stardusts and CE3 bottom coils are among my favorite.
I use both the 2.0ml vivi nova AND the CE5/Vision V3 clearomizer (different peeps call them differently). They both look great on the twist; however, if you get the vivi nova, you need to get an adapter for it to fit. Here are the Vision V3 clearomizers I get from Altsmoke as they are about the cheapest I've found so far; however, you cannot pick out the resistance of these from Altsmoke-- they sell them with the 2.8ohm.
AltSmoke.com | Personal Vaporizers | Electronic Cigarette | Ecigs | Vision Clearomizer - AltSmoke
AltSmoke.com | Personal Vaporizers | Electronic Cigarette | Ecigs | Vision Clearomizer - AltSmoke
If you checked my link I wasn't suggesting the Phoenix Re-buldables. I've been using their Phoinix XL Reborns (different product). Other vendors sell this as the "CE3" but the "reborns" are a new and improved design. Gotvapes is the only company that has them right now.
I find these to work great and as they are small, they are easily pocketable. The downside is that they have to be filled with a syringe, so topping them off while on the go is a problem for some. Instead of a larger tank I just fill up a few and stick them im my pocket just like I did with cartomizers.
Sorry to hear you've had trouble with Gotvapes. I purchase from them often and have never had any problems at all.
As far as Gotvapes being "pricey"...Yes on some items they are a buck or two more than other places, and on other items they may be cheaper, but they are not one of those ripoff sites that charge double or triple the price.
For example for a Phoenix XL Gotvapes sells 5 at $9.95 which is the same price found elsewhere (Smoleless Image has the old style CE3 at $9.99). $2 a piece doesn't sound too "pricey" to me
But in the end, it was just a suggestion, and worth consideration as well as some of the other fine products suggested. I also agree with you that due to the CE3 having to be filled with a syringe, it may not be a good choice for a newbee.
Sorry, noob questions.
I just got the Spinner, too, but I'm a bit confused on which resistance and carts I should be using. Thus far, from the guidance I got at MadVapes, I have been getting the dual-coil 1.5 resistance one hole at 3.7v in a tank setup. This works pretty well but I've had some problems with leaking and/or carts not really getting very wet.
I've been searching threads to try to determine other options and found this one, but I'm confused at some of the answers. When I look up the vivi nova and the clearomizers the resistance varies. If I use over 2.0 resistance, is the voltage supposed to be spun up to 5 or something? I just don't want to blow up the battery or destroy it somehow.
Basically my question is can you direct to a particular site you think has good tanks and carts that fit the Vision Spinner from MV? I'd prefer not having to fill with a syringe or doing lots of work. Looking at the above stuff, I'm not even certain if some of those come with atomizers or what..obviously noobland, sorry. I suspect my stuff will die soon and seeing as I'm a month analog free don't want that to happen.
Thanks for any help.
Mad the vivi nova comes with 3 heads 1.8/2.4/2.8 and you can try all of them to see what you like best. I find it easier to remember lower volts/lower ohms-higher volt/higher ohms. All of the 510 stuff will fit the spinner but everyone has their favorite equip and that comes with trial and error.
Thanks klynnn, I looked over that new vivi nova. So, what replacement parts do I buy, exactly? One probably doesn't need another whole tank system, so do you just buy replacement heads? They look cool, with the wicks.
Edit: Doh, I see one just buys the heads, which are sold out.
Last edited:
Most people enjoy vaping around 8W, here's a automated excel made by bcalvanese to help you determine what ohm/voltage to use:
http://www.e-cigarette-forum.com/fo...mated-vaping-power-chart-vapingpowerchart.xls
PS for ViviNova, I vape at 3.8-4.2V on 2.4ohm heads depending on the juice.
http://www.e-cigarette-forum.com/fo...mated-vaping-power-chart-vapingpowerchart.xls
PS for ViviNova, I vape at 3.8-4.2V on 2.4ohm heads depending on the juice.
Last edited:
Most of the vivi nova tanks come in a pkg with the 3 heads you just buy more of the heads you like. Since you have the spinner I would recommend extra 2.4 heads. They seem to work well for me at about 4.2v. I found the vivi doesn't like real high voltage as the juice tastes burnt.
Vision Nova Tank Clearomizer V3 Mega
Vision Nova Tank Clearomizer V3 Mega
The spinner or twist are pretty much the same. I have both and really don't have a preference. The Vision Vivi Nova is great with either
I have made several puchases from gotvapes. Which sites do you use for hardware like tanks, cartos, e.c.t?
Tanks:
Vision Nova Tank Clearomizer V3 Slim
Spare Heads:
Vision Nova Replacement Heads V3 long Wick
I agree the 2.4 ohms gives you the widest range of voltage...1.8 ohms for 3.3-4.0 volts. 2.4 from 4.0- 4.5 or even 4.8 volts.
Vision Nova Tank Clearomizer V3 Slim
Spare Heads:
Vision Nova Replacement Heads V3 long Wick
I agree the 2.4 ohms gives you the widest range of voltage...1.8 ohms for 3.3-4.0 volts. 2.4 from 4.0- 4.5 or even 4.8 volts.
- Status
Similar threads
