EHPro Bachelor RTA - single coil

Status
Not open for further replies.

Cirus

Super Member
ECF Veteran
Dec 13, 2014
489
1,084
Texas
Hmmm.....The oring at the top of the chimney everyone said appears smaller than the extra.....is it the small black one you see when you take the top cap off? If so, mine was bigger. The extra was skinnier and larger. Didn't even snug up to the chimney. The stock was a little wonkey looking when I took the cap off. Like it wasn't on right, or like you'd expect the larger extra that doesn't snug up to the chimney would be. Put on the extra anyway and have not had any leaks. No confidence here though.
 
Last edited:

vincom

Ultra Member
ECF Veteran
Jun 19, 2014
1,151
1,948
Philippines
coming from the stmini rba v1 i was needing something easy and simple and single coil to use.
got the bachelor cheap from fasttech and i just just received it.
after using the pre installed stock coil i quickly changed it out to a ss316l wicked w/rayon.
new to this temp thing but so far rocking it on power mode w/evic mini.
heres an unbox vid of the bachelor

 

Jake67

Super Member
ECF Veteran
Apr 1, 2014
864
624
Us
Love this tank. Bought two more! Buuuuuut today the top on the one I am using swiveled open and drained my tank into the material of my laptop bag! Anyone having problems with the top not staying snug closed? Mine swivels open pretty easily.


Sent from my iPhone using Tapatalk

I have the same problem. You need to put a Vape band on it keep it secure.
For that reason it's back in the box.


Sent from my iPhone
 

man00ver

Ultra Member
ECF Veteran
Verified Member
Oct 10, 2014
1,318
1,740
Braselton, GA, USA
Way back when, @Arch Gwen asked this:
This is driving me crazy!!!Can someone please tell me where does the single large white o-ring goes that comes in the spare O-ring bag for the Bachelor Nano.

I answered:
That one goes under the glass, in the exterior channel of the dome piece.

Then @cheech226 observed:
my tank came with a blue one on the bottom of the glass and both the funny shaped blue one and the clear on the top. hmmmmmmm........

Then a long discussion with too many descriptive turns ensued. Many readers got confused (although @OhTheAgony posted some pictures to help clarify), and I promised this:
I'll post some unboxing pictures when my new Bachelors arrive, and will revisit the large white/clear O-ring location question.

So, after the better part of two months, the slow boat from China arrived. The short story is:
1. The large white O-ring DEFINITELY goes on the bottom edge of the glass, and NOT on the top edge.
2. The hinged top-fills on these new ones don't seem to "latch" the way my first two did, so I'll do the vape-band trick if lugging them in bag or pocket.
3. I'm now the proud owner of FOUR NO-LEAK Bachelors. The last pic shows the two new tanks, full of 50/50 juice and standing fearlessly atop my brand new VTwo Minis. Notice the JFC and AFC are both wide open. They've been sitting there for more than two hours now, and not a drop has spilt.
 

ShowerHead

Ultra Member
ECF Veteran
Verified Member
Feb 23, 2014
1,087
2,142
Massachusetts
I've got four of these, two bought early on, two bought recently. All from eciggity.
None leak in any way, though all have condensation.
I do have to wipe the fill area after filling and wipe around the cap once I twist it closed after filling. More a matter of fill tips on my bottles not stopping the juice from coming out.
One of the four has a very loose topfill cap. I wouldn't want to take it out and about.
I have to say these tanks are the best tanks I have had. No idea why others are having the problems they outline here.
 

Wheats

Senior Member
ECF Veteran
Verified Member
May 11, 2014
274
391
Union NJ
I've got four of these, two bought early on, two bought recently. All from eciggity.
None leak in any way, though all have condensation.
I do have to wipe the fill area after filling and wipe around the cap once I twist it closed after filling. More a matter of fill tips on my bottles not stopping the juice from coming out.
One of the four has a very loose topfill cap. I wouldn't want to take it out and about.
I have to say these tanks are the best tanks I have had. No idea why others are having the problems they outline here.

Indeed. I open another one of three and it is has a solid topfill cap. It kinda clicks in a bit and takes effort to open. I guess my first one was a manufacturing flaw.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: man00ver

OhTheAgony

Ultra Member
ECF Veteran
Verified Member
Jan 24, 2011
1,583
3,429
Netherlands
Just thought I'd post this here too since it is a nice comparison shot imo:

27946060186_e0b3dc37e3_b.jpg


Serpent mini vs Bachelor Nano. The difference in size is clear I would think, but the difference in weight is equally large.

Don't ask me about the SM's performance just yet though, I'm still getting acquainted with it.

I've been taking the BN out more frequently recently by the way. It is still awesome. No leaks in my pocket, no leaks in my bag. Doesn't matter if I forget to close off the JFC. Top cap stays shut as well without the help of a vapeband.

I just wish the other three leaky .......s were anything like it. This one is performing so well that I'm tempted to try a fifth one, but hopefully I'll know beter....with luck I've been having lately.. :(
 

OhTheAgony

Ultra Member
ECF Veteran
Verified Member
Jan 24, 2011
1,583
3,429
Netherlands
idk, ive had for over a week,vape about 30mls/day, 80% vg and it only leaked on me when i forget to close juice channels when filling

Sounds like you got a good one then, cherish it. I have one of those too and it's heavenly.

Unfortunately I have 2 others and I've returned one more that I couldn't stop from leaking.

I'm just playing the lottery once more :rolleyes:
 

Haylon357

Super Member
ECF Veteran
Sep 1, 2014
762
1,375
USA
I just noticed something. I have gotten into a stealthy mode. I have been running my SM on my Vapor Shark R-DNA 40. Decided to put the Bachelor Nano on it and nothing. Check atomizer! So I put it on my Rx200 and DNA200. Same message. Put it on my SX Mini and bang. It works. Is there some trick I can do to get this tank to work on my other mods?

Sent from my LG V10 using Tapatalk
 

Jake67

Super Member
ECF Veteran
Apr 1, 2014
864
624
Us
I just noticed something. I have gotten into a stealthy mode. I have been running my SM on my Vapor Shark R-DNA 40. Decided to put the Bachelor Nano on it and nothing. Check atomizer! So I put it on my Rx200 and DNA200. Same message. Put it on my SX Mini and bang. It works. Is there some trick I can do to get this tank to work on my other mods?

Sent from my LG V10 using Tapatalk

Have you tried an o ring on the 510 of the atty to make it a bit longer?


Sent from my iPhone
 

vincom

Ultra Member
ECF Veteran
Jun 19, 2014
1,151
1,948
Philippines
I just noticed something. I have gotten into a stealthy mode. I have been running my SM on my Vapor Shark R-DNA 40. Decided to put the Bachelor Nano on it and nothing. Check atomizer! So I put it on my Rx200 and DNA200. Same message. Put it on my SX Mini and bang. It works. Is there some trick I can do to get this tank to work on my other mods?

Sent from my LG V10 using Tapatalk
i know for a fact the stmini has a longer 510 than the bachelor.
the stmini never layed flush on my evic mini but the bachelor lays flush
 

Haylon357

Super Member
ECF Veteran
Sep 1, 2014
762
1,375
USA
i know for a fact the stmini has a longer 510 than the bachelor.
the stmini never layed flush on my evic mini but the bachelor lays flush
I haven't had this problem for 3 years. Pretty much everything I had fit and functioned as intended. Guess there are still a few instances where the 510 on some devices are not compatible with some attys.

Sent from my LG V10 using Tapatalk
 
Status
Not open for further replies.

Users who are viewing this thread