Eleaf iStick "pico"

[EMusic]

How did you determine that? The text seems to have the proper change in apparent character size and spacing consistent with the photo angle.

(Not saying you are wrong, just curious about how you determined it.)

I have used Photoshop since it came out in the 90s (professionally as well). The white of the text is far too bright considering that the text is on the shadow side of the mod.

 

[EMusic]

Meaning the text should look darker towards the right side of the mod.

 

[Fozzy71]

No offense intended, I just love this meme.

I too have used PS professionally (and for making memes) some years ago and I agree that looks shop'd/mocked up.

 

[markfm]

I thought they had just arranged it for optimal display, several light sources, based on shine on the back left corner as well as the front right edge.

Thanks - it's always good to learn [emoji5]

 

[EMusic]

No offense intended, I just love this meme.

I too have used PS professionally (and for making memes) some years ago and I agree that looks shop'd/mocked up.

Nice meme!

 

[EMusic]

I thought they had just arranged it for optimal display, several light sources, based on shine on the back left corner as well as the front right edge.

Thanks - it's always good to learn [emoji5]

NP!

 

[ccwaters]

Arctic Fox Firmware now works on the Pico, adds a fair bit of options, including profiles, , smooth pre-heat, device monitor similar to Evolve Escribe software.

GitHub - maelstrom2001/ArcticFox: Custom Firmware for Joyetech, Wismec and Eleaf battery mods

 

[Fozzy71]

Arctic Fox Firmware now works on the Pico, adds a fair bit of options, including profiles, , smooth pre-heat, device monitor similar to Evolve Escribe software.

GitHub - maelstrom2001/ArcticFox: Custom Firmware for Joyetech, Wismec and Eleaf battery mods

ugg, i still havent got around to trying to figure out the myevic for my rx mods......

 

[ccwaters]

ugg, i still havent got around to trying to figure out the myevic for my rx mods......

The Arctic Fox firmware is just a more advanced version of Myevic, if you haven't tried it yet try the NFEtoolbox, it is included in the Nfirmware editor download, allows full configuration of all the options via PC makes it much easier then trying to bounce through all the on device menu options.

Same firmware now works on the following, learn one you learn them all.

• eVic: VTC Mini, VTC Dual, VTwo Mini, VTwo, AIO, Basic,
• eGrip II / Light,
• Cuboid, Cuboid Mini,
• Presa TC75W, Presa TC100W, RX75, RX200, RX200S, RX2 / 3
• iStick Pico 75W

 

[Fozzy71]

The Arctic Fox firmware is just a more advanced version of Myevic, if you haven't tried it yet try the NFEtoolbox, it is included in the Nfirmware editor download, allows full configuration of all the options via PC makes it much easier then trying to bounce through all the on device menu options.

Same firmware now works on the following, learn one you learn them all.

• eVic: VTC Mini, VTC Dual, VTwo Mini, VTwo, AIO, Basic,
• eGrip II / Light,
• Cuboid, Cuboid Mini,
• Presa TC75W, Presa TC100W, RX75, RX200, RX200S, RX2 / 3
• iStick Pico 75W

tmi for a whiskey night, downloaded, bookmarked and merged all my device firmwares into one folder for later...........

 

[TrollDragon]

Nice!
Gonna check this out on both my Cuboid and Pico.

 

[Jim_ MDP]

Ditto on the "not right now damn it"... have to finally get around to checking all of them soon.

Looks like the Fox one is only for the large Portrait screens (I only have an original VTC with that) but it seems to have a "light sleep" mode (for older mods) so the clock will keep time while not in use.
Drains the batt a little (?) faster though.

 

[Valkyrie_kara]

for me ... a step by step tutorial is indeed needed...

 

[ccwaters]

Looks like the Fox one is only for the large Portrait screens (I only have an original VTC with that)

No, it works on small screen as well, I have the same firmware on my Cubiod, VTC Mini, RX200S, RX200, and my Pico

 

[ccwaters]

Here is the link to the latest firmware, can be a little difficult to find, I had to go to the russian forum to find it.

https://dl.dropboxusercontent.com/u/43399149/VTC/arcticfox/af_161221.bin

 

[Fozzy71]

Here is the link to the latest firmware, can be a little difficult to find, I had to go to the russian forum to find it.

https://dl.dropboxusercontent.com/u/43399149/VTC/arcticfox/af_161221.bin

nvmd i read the url

 

[ccwaters]

the firmware is universal same file I linked works on all of the following devices.

• eVic VTC Mini
• eVic VTC Dual
• eVic VTwo Mini
• eVic VTwo
• eVic AIO
• eVic Basic
• eGrip II / Light
• Cuboid
• Cuboid Mini
• Wismec Presa TC75W
• Wismec Presa TC100W
• Wismec Reuleaux RX75
• Wismec Reuleaux RX200
• Wismec Reuleaux RX200S
• Wismec Reuleaux RX2/3
• Eleaf iStick Pico 75W

 

[TrollDragon]

Here is the link to the latest firmware, can be a little difficult to find, I had to go to the russian forum to find it.

https://dl.dropboxusercontent.com/u/43399149/VTC/arcticfox/af_161221.bin

They are right there on the GitHub under the Releases tag.
Releases · maelstrom2001/ArcticFox · GitHub

 

[Fozzy71]

Guess I got some reading to do tomorrow since I am not working this week

 

[Jim_ MDP]

No, it works on small screen as well, I have the same firmware on my Cubiod, VTC Mini, RX200S, RX200, and my Pico

Oh cool.
I only skimmed the page and didn't see any small screen grabs, not sure which features transfer over.
Have to have a look tomorrow.