Eleaf Istick

Status
Not open for further replies.

gerrymi

Vaping Master
ECF Veteran
Jul 12, 2013
3,917
14,560
The 'Burgh, PA.
Last edited:

Katdarling

I'm still here on ECF... sort of. ;)
Supporting Member
ECF Veteran
Verified Member
Jan 25, 2011
32,582
167,751
Utopia
I think these are so cool! Only problem is, being a guy, I just wouldn't be able to get away with it. [emoji15] Very nice Katdarling [emoji4]


Sure ya can! :D Don't forget........ REAL men vape pink, umm, purple. Right gerry? ;)


iStick MINI

Is the 510 connector spring-loaded and/or adjustable???

[I know Kat's WONDERFUL google list is blank under the "Center Pin" column for the Mini...but it's hard to believe that Eleaf is using the "old" 20Watt-iStick 510 connector on it! :shock: ]

https://docs.google.com/spreadsheets/d/1-z_V674p-5HYa9uzMqj1mq67da8-hnOOh2NNB2-ifgI/edit#gid=0

:pop:
 

Bikenstein

Vaping Master
ECF Veteran
Verified Member
Jan 9, 2014
5,759
19,510
The Lab
Exactly....Bike said he's heading to a power plant shut-down with his Tootle-Puff eleaf air atty......why would pink make any difference?----:vapor:

They're not pink they're lightish red...:facepalm:
a manly.jpg
 

Stosh

Vaping Master
ECF Veteran
Oct 2, 2010
8,921
16,789
74
Nevada

billherbst

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Oct 21, 2010
4,239
9,486
Columbia, Missouri
www.billherbst.com
iStick MINI

Is the 510 connector spring-loaded and/or adjustable???

[I know Kat's WONDERFUL google list is blank under the "Center Pin" column for the Mini...but it's hard to believe that Eleaf is using the "old" 20Watt-iStick 510 connector on it! :shock: ]

I don't own an iStick Mini 10W, but, since none of the spec sheets for the device mentions anything about an adjustable or spring-loaded positive pin, I have to assume that Eleaf used the same fixed pin connector as on the iStick 20W. Eleaf wouldn't have overlooked the chance to highlight such an obvious improvement. Ergo, must be the same damned pin as on the 20W.

Someone who owns a Mini 10W can tell us for sure, but I'd be very surprised if the pin is spring-loaded/floating.
 

scaredmice

Senior Member
ECF Veteran
Sep 23, 2014
220
660
Valencia, Spain
I don't own an iStick Mini 10W, but, since none of the spec sheets for the device mentions anything about an adjustable or spring-loaded positive pin, I have to assume that Eleaf used the same fixed pin connector as on the iStick 20W. Eleaf wouldn't have overlooked the chance to highlight such an obvious improvement. Ergo, must be the same damned pin as on the 20W.

Someone who owns a Mini 10W can tell us for sure, but I'd be very surprised if the pin is spring-loaded/floating.

I don't own one either, but the bending adaptor appears exactly the same on top of a 20W and a 10W, so my guess is that it is the same top plate as the 20W, just with the circular window to show voltage and battery status.
 

pokemom

Ultra Member
ECF Veteran
Verified Member
Apr 24, 2014
2,087
9,739
Lauderhill, Florida, United States
I don't own an iStick Mini 10W, but, since none of the spec sheets for the device mentions anything about an adjustable or spring-loaded positive pin, I have to assume that Eleaf used the same fixed pin connector as on the iStick 20W. Eleaf wouldn't have overlooked the chance to highlight such an obvious improvement. Ergo, must be the same damned pin as on the 20W.

Someone who owns a Mini 10W can tell us for sure, but I'd be very surprised if the pin is spring-loaded/floating.

Not spring loaded. Also appears to be brass. I never had a problem w/any of my 3 20Ws but I have had one of my minis for less than a month & the pin already needed the oring fix.


Sent from my iPhone using Tapatalk
 

Katdarling

I'm still here on ECF... sort of. ;)
Supporting Member
ECF Veteran
Verified Member
Jan 25, 2011
32,582
167,751
Utopia
For those who are "Itty Bitty" followers...



And so my sweetums, THE Sheet stays the same.

If the cell is blank, then the center pin is non-adjustable, non-spring, or non-floating.

I can mark the others as "fixed" is you like.


Your spreadsheet wishes are my kommands. ;)
 

Kent C

ECF Guru
ECF Veteran
Verified Member
Jun 12, 2009
26,547
60,051
NW Ohio US
My mini istick's center pin is not spring loaded but the ring around it is beefed up more than the 20W. You couldn't get anything under it. (mine may be different than pokey's). The adapter is also not spring loaded. That said, I've not had the problems with it (nor the 30W), that I had with the 20W.
 

inspects

Squonkamaniac
ECF Veteran
Verified Member
Dec 15, 2014
4,455
10,798
Arizona, Ecuador
This is the wrong thread, regardless....I mixed a batch of Wakonda and Ahlusion chocolate cream 50-50 mixture, slapped the Kanger subtank on the iStick 50....the flavor is unbelievable...simply incredible.

If anyone happens to have those two juices available, give it a shot, I'll bet you will like it if you're into coffee and chocolate, it not overpowering, but its certainly addicting.....:)

The iStick 50 makes it shine at about 18 W's. This is the first time I ever had any type of coffee or chocolate flavor...actually when I thought about it I said to myself this probably isn't a good idea, I was wrong.

Cheers----:)
 
Status
Not open for further replies.

Users who are viewing this thread