Eleaf Istick

[inspects]

The sub tank Nano's have not leaked for me (yet)....I use 8 of them.

The sub tanks and sub tank mini's both leak like sieves, they're junk.

They need a seal between the coil and the atty, that is the only place juice can be leaking, when its coming from the air flow, no matter how tight the coil is.

In my opinion the RTA section of the sub tanks is junk too, the juice channel is about the size of a needle, they leak too.

Very poor engineering......

Bought a few Youde Goblins, and Youde Goliath's no leaks, easy build decks, great flavor, plenty of air.....

I'm sure there are many other atty's that don't leak, just haven't ventured any further than Youde products (yet).

Youde UD Goblin V2 Rebuildable Kayfun Style Tank Atomizer

Goliath RTA by Youde

 

[IMRs]

I adjust mine in 1/4 turn increments until I get the draw right for different juices.

Thanks for the heads up Bike. This works great for me.

 

[Bikenstein]

Looks like I'm not the only one with the idea of a no coil atomizer.
Don't know who's seen this yet but here it is

 

[gandymarsh]

Had me fooled

 

[IMRs]

This is absolutely what I've been hoping for all along!!

 

[ccwaters]

Looks like I'm not the only one with the idea of a no coil atomizer.
Don't know who's seen this yet but here it is

Had me up until the tin-foil

 

[love coffee]

Looks like I'm not the only one with the idea of a no coil atomizer.
Don't know who's seen this yet but here it is

 

[ccwaters]

Could I get you to list your top 10 atty's since the Origen and FEV's rank so high?
The VS in a Microstick would be a sweet stealth rig, I have always liked the look of the GP Spheroid on a Microstick.

No RDA, included in this, just tanks.

Erlkonigin Nano
FEV VS
Erlkonigin
FEV 3
Taifun GT 2
Origen Genesis V2
Spheroid
Rose V2
Youde Goblin
Expromizer
Aqua V2
Russian 91 2nd revision (not V2)

Last 5 could be in any order really, and honestly quite a few atomizers that should be on the list, but to simplify. I know my #1 pick might ruffle some feathers, as it can go downhill fast if not built correctly, but when the Erl is built right it simply cannot be matched for flavor. I do enjoy good dense heavy vapor, but clouds are not all that important to me. It is all about flavor, and Nic delivery.

If I had to choose just one atty, it would probably be the Flash VS, yea it only holds a couple ml, but I can refill it literally in a few seconds, coil & wick access is akin to a dripper, replacing wicking material doesn't take much longer, flavor close to the Erlkonigin, but better airflow.

The full sized flash is identical, but much larger, only reason I don't rate it higher, is it sacrifices some flavor due to chamber size. I do tend to prefer smaller atomizers over large bulky.

I've got a Silverplay, and a Goliath inbound, but would be surprised if either are in my top 5

One of my favorite stealth Setups Istick with a Piculisci RTA

 

[JeremyR]

Nice list pleased to see the fev's at the top.

 

[TrollDragon]

Many thanks for the list and the info cc!

I had an Idea there would be an Erlkonigin in that list at or near the top. I like the top fill, AFC and the design of the deck, but I am not one for a device that requires a fussy build. The Erlprinz looks like something I might possibly try if I wanted to step into the Erlkonigin line.

Dave Modz from Cloud 50 ran a little comparison of the Taifun, Kayfun 3.1 and Rose RTA's, he is more or a cloud chaser but he does get close to dripper quantity vapor production from the Kayfun. He's not a flavor chaser for sure...

Hopefully picking up the Origen Genesis at the PO after they recover from the holiday. I will spend some time with it then onto the FEV's!

 

[TrollDragon]

One of my favorite stealth Setups Istick with a Piculisci RTA

That is a crazy little RTA...

Looks similar to the In'Ax atty.

 

[IMRs]

ECF is sleeping


I'm off to dinner also... All of you good peoples, have a wonderful Holiday!

 

[IMRs]

Wowwwwww... you know it's dead when you get a 'lick' that fast, huh inspects?

 

[inspects]

Wowwwwww... you know it's dead when you get a 'lick' that fast, huh inspects?

lmao..........

Yep.....

 

[IMRs]

 

[Libbydude]

I've seen some posts in the new members forum by long term members stating that the 20 is only inaccurate if a setting below battery voltage is used. I have a fair understanding of dc/dc vs pwm and mean vs rms. I have also seen the pbusardo scope results. Has there been new info come out showing those scope results to be inaccurate?

 

[vapspaz]

Thanks Linda for convincing me. It is pretty nice. The only minor complaint is a lot of my drip tips float around on it. I will have to get some larger o rings for a couple of them.

Two words.

Dental floss.


Or thread will work also. Just tightly wrap 2 or 3 times around your drip tip o-ring groove leaving your o-ring in place. Trim, tuck and done.
I came up with this little trick about 4 years ago. This forces the o-ring out just a little and makes it fit more snug in those loose fitting holes.

 

[ccwaters]

Looks similar to the In'Ax atty.

Yea, sort of a scaled up version, I've got an IN'AX Mk2r on the way so we'll see how it compares to the Origen.

In the mean time playing with this one.

 

[TrollDragon]

Very Nice!

And how does the Goliath perform? Inquiring minds need to know!

 

[ccwaters]

Very Nice!

And how does the Goliath perform? Inquiring minds need to know!

Flavor is pretty nice, probably the best dual coil native tank I have, wicking keeps up @80 watts on my IPV3, I prefer it around 40watts. Cloud chasers should love it. I've got a Silverplay on the way, I'll be surprised if it does better then this. Pretty happy with it so far, like it better then the Goblin, Juice control probably not really needed, maybe with really thin juice, but how many will run this with high PG juice.