Eleaf Istick

Status
Not open for further replies.

op22222

Senior Member
ECF Veteran
Verified Member
May 11, 2013
266
386
South Western, PA USA
The only person I know with a scope is 300 miles from me and he doesn't vape. He's a smoker. DUN DUN DUHHHH. LoL. If I could live without my istick for a week id just send it to him. But I can't so I won't.

It's been scoped already. OK, I found my old hand held scope (kinda junky for what I paid for it) and played around a bit today. Had fun. If I can find my cable & PC software maybe I can post better pics & specs.

You'll have to count the divisions for voltage because on the device the volt readout is not dampened and jumps around. The Vamo's were two different v2's, one set to Vavg and the other to Vrms. All were using the same RBA & coil.

For your amusement and pleasure:
Attached Thumbnails Attached Thumbnails
eleaf Istick-istick.jpg Eleaf Istick-vamo-vavg.jpg

Eleaf Istick-vamo-vrms.jpg Eleaf Istick-vtr.jpg

Eleaf Istick-sid.jpg
 

aldenf

Ultra Member
ECF Veteran
Verified Member
Jun 26, 2014
2,558
10,293
NYC, NJ, USA
I don't mean to come off as rude, that is not my intention...but I have seen posts like this numerous times in this thread, (yep,I've read the whole thing) and it makes me wonder: why is the entire iStick fanbase waiting on PBusardo to test this thing? Certainly there are other people out there who have access to an oscilloscope and also enjoy vaping. Why can't we just ask Joyetech directly? Seems like we'd get an answer to this burning question a lot faster that way than waiting on Phil to get around to it.

I couldn't agree more. Joyetech reps have read this thread, as it's been quoted on Reddit. Yet they still haven't responded. Apparently, they have a response planned for the near future. They haven't been forthcoming with the amp limit of the device. We had to guess it for ourselves using Ohm's law. I would love to see a complete scope analysis for every device on the manufacturer's website. We wouldn't need reviewers to supply this information then... As long as we trust the manufacturers. Some vapers do care about tech specs.
 

op22222

Senior Member
ECF Veteran
Verified Member
May 11, 2013
266
386
South Western, PA USA
It's been scoped already. OK, I found my old hand held scope (kinda junky for what I paid for it) and played around a bit today. Had fun. If I can find my cable & PC software maybe I can post better pics & specs.

You'll have to count the divisions for voltage because on the device the volt readout is not dampened and jumps around. The Vamo's were two different v2's, one set to Vavg and the other to Vrms. All were using the same RBA & coil.

For your amusement and pleasure:
Attached Thumbnails Attached Thumbnails
Eleaf Istick-istick.jpg Eleaf Istick-vamo-vavg.jpg

Eleaf Istick-vamo-vrms.jpg Eleaf Istick-vtr.jpg

Eleaf Istick-sid.jpg

Looks like the pics won't link..................... if your interested their on page 78 post# 1545
 

aldenf

Ultra Member
ECF Veteran
Verified Member
Jun 26, 2014
2,558
10,293
NYC, NJ, USA
Pretty much everyone in this thread already has one and new posters are getting them delivered to them daily. I find it hard to believe he can't get one. I love watching his videos as much as everyone else does. IMO nobody goes into more detail than he does when reviewing a product, but cmon P, GET ON IT!

Eleaf/Joyetech sent samples out to reviewers long before it's announcement/release. Apparently, none of the top subscribed reviewers on Youtube received one. Strange too, as it seems right up Grimm's alley.
 

Kryp2nite26

Senior Member
ECF Veteran
Verified Member
Jul 13, 2014
146
117
Illinois
Eleaf/Joyetech sent samples out to reviewers long before it's announcement/release. Apparently, none of the top subscribed reviewers on Youtube received one. Strange too, as it seems right up Grimm's alley.

Why wouldnt they send the samples to the top viewed reviewers? Seems to me if they wanted to get the word out about a new product, they would send them to reviewers people actually watch. Just doesn't make sence to me.
 

zoiDman

My -0^10 = Nothing at All*
Supporting Member
ECF Veteran
Apr 16, 2010
41,676
1
84,919
So-Cal
Why wouldnt they send the samples to the top viewed reviewers? Seems to me if they wanted to get the word out about a new product, they would send them to reviewers people actually watch. Just doesn't make sence to me.

With 93,300 Views for a Single Thread on 1 Forum, I wonder how much they Need to get the Word Out?

:)
 

DaveOno

ECF Guru
ECF Veteran
Verified Member
Oct 27, 2013
12,763
23,616
Dutchess County, New York
A few things.

Vapeoutlet on ebay - I ordered mine from them. They didn't know their stash only had black and silver. They called me and I switched from blue to black. She said it'd go out that day. The label was printed, but it didn't make it to the PO for 2 days. Luckily I shamed her into sending it Priority. Got it a day later than if everything went smoothly. But they forgot the Naughtette. She sent it out, priority. So I eventually got it all, great stuff, but don't be surprised to see the label printed, ebay saying it has shipped, but it sits for 2 or 3 days before it gets going.

egrip. OK, I guess someone might want this, but not me. I change flavors often, so as not to numb out the taste buds. Spin off, spin on, and a different flavor. There are tanks out there for $5. And I never leave the house without at least 2 tanks and lots of mAh. A beginner is going to change flavors and nic levels often at the start. I don't know the price on this, but either get a pair of 1100 twisters and a bunch of tanks, or get the iStick or MVP and some tanks. Variety. And don't we preach "backups?"

Busardo. I can't wait for his opinion.
 

Stosh

Vaping Master
ECF Veteran
Oct 2, 2010
8,921
16,789
75
Nevada
That's Odd.

Because I was Not Aware of the iStick Kit's coming with a Wart. Was that something the Retailer included.

And my "User Manual" doesn't seem to have the Broken English Wording that yours has.

Mine was from Avid Vaper, came with the full kit, Wart, Charger wire, eGo adapter, iStick, and
the printing n the manual was so tiny I just ditched it, my bi-focals were no match for it.
 

Blaize19

Super Member
Sep 4, 2014
304
292
USA
That's Odd.

Because I was Not Aware of the iStick Kit's coming with a Wart. Was that something the Retailer included.

And my "User Manual" doesn't seem to have the Broken English Wording that yours has.
Mine came in a factory sealed box, with the wall wart, USB cable, adapter, and badly translated manual.

Sent from my Nexus 5 using Tapatalk
 

zoiDman

My -0^10 = Nothing at All*
Supporting Member
ECF Veteran
Apr 16, 2010
41,676
1
84,919
So-Cal
Mine was from Avid Vaper, came with the full kit, Wart, Charger wire, eGo adapter, iStick, and
the printing n the manual was so tiny I just ditched it, my bi-focals were no match for it.

I hear you.

I had to read mine with one of those 10X Visors that I use to take Tiny Screws out of things.

LOL
 

drysprocket

Ultra Member
ECF Veteran
Verified Member
Jul 11, 2014
1,128
1,916
Los Angeles
Just got mine 5 minutes ago! Not sure how my mailman managed to wait until after 7pm to deliever today...of all the days.

I got my black one from Avid Vapor. They shipped super fast, and it came double packaged. I am IN LOVE with this little badass. After only a few minutes with it, I truly think this is a game changer. I was using my MVP all day, and holding it side by side is a joke. Innokin better cowboy up quick and get ready; I think when word gets out- buying this over the MVP seems like a no-brainer.

I was a full blown noob a few months ago, and this was exactly what I was after. If you're on the fence- get it. I can't imagine anyone being sorry as long as they have researched it.
 

Sage-femme

Vaping Master
ECF Veteran
Verified Member
Jan 19, 2014
4,194
5,800
Beautiful Central Florida
A few things.

Vapeoutlet on ebay - I ordered mine from them. They didn't know their stash only had black and silver. They called me and I switched from blue to black. She said it'd go out that day. The label was printed, but it didn't make it to the PO for 2 days. Luckily I shamed her into sending it Priority. Got it a day later than if everything went smoothly. But they forgot the Naughtette. She sent it out, priority. So I eventually got it all, great stuff, but don't be surprised to see the label printed, ebay saying it has shipped, but it sits for 2 or 3 days before it gets.

At the risk of someone throwing up the dead horse emo on me, I think readers here know my opinion of vapeoutlet/ebay.
 

zoiDman

My -0^10 = Nothing at All*
Supporting Member
ECF Veteran
Apr 16, 2010
41,676
1
84,919
So-Cal
Just got mine 5 minutes ago! Not sure how my mailman managed to wait until after 7pm to deliever today...of all the days.

I got my black one from Avid Vapor. They shipped super fast, and it came double packaged. I am IN LOVE with this little badass. After only a few minutes with it, I truly think this is a game changer. I was using my MVP all day, and holding it side by side is a joke. Innokin better cowboy up quick and get ready; I think when word gets out- buying this over the MVP seems like a no-brainer.

I was a full blown noob a few months ago, and this was exactly what I was after. If you're on the fence- get it. I can't imagine anyone being sorry as long as they have researched it.

Right On Dry.

What color did you go with?
 

drysprocket

Ultra Member
ECF Veteran
Verified Member
Jul 11, 2014
1,128
1,916
Los Angeles
Right On Dry.

What color did you go with?

Black. Gotta go with the classic. Though, I can totally see myself getting another color just to have 2, and getting rid of all of my other ego's and MVP. Definitely ditching my SmokTech Sig....which served me well, but feels even more dated as of 10 minutes ago.
 
Last edited:

salemgold

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Jul 5, 2010
28,155
63,784
South Carolina
Mine was from Avid Vaper, came with the full kit, Wart, Charger wire, eGo adapter, iStick, and
the printing n the manual was so tiny I just ditched it, my bi-focals were no match for it.

Oh, good! I talked my friend into buying one from Avid. This will be her first mod moving up from Spinners/Twists. I knew that it was a full kit but did not know that the wall wart came with it too. :thumb:
 
Status
Not open for further replies.

Users who are viewing this thread