Eleaf Istick

[Peter_C]

Well - I *was* saving my $$ for either the P3 or the upcoming (crap, forgot the name) - using the evolve 20 board - anyhow, I ordered one of these in black. I miss having a small device for times that I'm running errands and whatnot. Love my Billet Box, but it's not an easy carry, and neither is my ProVari. Plus I tend to drop stuff when out and about and it would kill me to ruin a great device.

These I believe will be perfect for newbies too, and may well be an MVP2 killer.

 

[Jayscuzzi]

OK peeps who have received one. Let's see pics so I can compare live colors I'm thinking blue but my whole arsenal is silver but the black looks good too lol

Jay G

 

[zoiDman]

OK peeps who have received one. Let's see pics so I can compare live colors I'm thinking blue but my whole arsenal is silver but the black looks good too lol

Jay G

At the Price these iSticks are going for, I'm thinking of just Buying one of Each Color.

 

[whodat2112]

With an Aerotank (version 1)

Next to an MVP2 (size comparison) My MVP is kinda beat up, it's my daily take to work PV.

 

[whodat2112]

Same Aerotank

 

[Jayscuzzi]

Thanks whodat2112 looks good.

Jay G

 

[salemgold]

OK peeps who have received one. Let's see pics so I can compare live colors I'm thinking blue but my whole arsenal is silver but the black looks good too lol

Jay G

I am not able to upload a picture right now but, the blue is a deep royal blue. I like it alot.

 

[tearose50]

And the Red/Violet/Fuchia is pretty much Magenta!

 

[whodat2112]

I will end up getting a second one, probably silver, when finances allow

 

[melloyello]

Been vaping on mine since i got it this morning at 11am, (its 9pm now).
This thing still shows little over half a battery left and ive vaped a full kfun tank on it (4ml's i think), so the battery life is actually better than i thought. 3.9v - 1.5ohm's. To me, on this device 3.9v hits at least. as hard as 4.2v on a my mech.
I LOVE the fact that i could vape it as a pass-through once it needs to be charged. This little thing has performed awesome! And like ~Zoid~, i still cant get over how small of a unit this is, its slightly shorter than a 30 ml bottle with a cap on it. i dont have huge hands but if i hold it, i can completely cover it in the palm.
I would like if the power button stuck out just a tad more so i could feel it better but i think i can get used to it.
Buttons are otherwise very responsive and clicky, just what i like.
One drawback with this being such a little device is that i sometimes cover the air hole on my kfun with my palm.
Just think if this would have been out there when i started vaping 3+ yrs ago? i highly HIGHLY would recommend this to anyone who isnt keen on sub ohming,
I bought another today to give to a vaping friend (i havent even asked her if she would like a new one but i KNOW she would love this).
I bought mine from the ebay seller and would do it all over again in a heartbeat.
To those that are on the fence about this, do yourself a favor and get one.
Now.

 

[roxynoodle]

That's interesting! I'm not sure if that'd be a safety concern or not but I'm curious what others have to say about it.

Me, too. I want to know if mine is defective or if others are the same. I don't know that its unsafe, just be careful about setting it where you normally would on other mods. I burned my lip on my drip tip and fried some juice in two attys.

 

[Wow1420]

Me, too. I want to know if mine is defective or if others are the same. I don't know that its unsafe, just be careful about setting it where you normally would on other mods. I burned my lip on my drip tip and fried some juice in two attys.

It seems like whatever watts I'd use on the MVP, if I subtract 0.5 for the istick, it will work out fine. That's working so far on a protank that I'd run at 6 watts on the MVP and KFs that I'd run at 9.5 on the MVP. It was interesting to try out the higher watts, but I drifted back to my normal range after a short time.

 

[MrsP0721]

Me, too. I want to know if mine is defective or if others are the same. I don't know that its unsafe, just be careful about setting it where you normally would on other mods. I burned my lip on my drip tip and fried some juice in two attys.

Well everyone thinks it hits harder (or hotter) than other mods. I'm ok with that lol, just have to start low and work my way up! I'm SO ready to get this, I really hope I love it as much as everyone else seems to!

 

[PaulBHC]

I watched Dimitri's review and he had a blue one if someone wants to see that color.

 

[Steeldragon]

I plan on putting one of the Kanger EMOW mega tanks on it. I think the form factor would be pretty good and match the colors. I have the silver and black tanks already and I ordered the silver and black Istick

 

[speedemon]

I received a blue istick today from ebay seller very fast shipping. I have hanna clones not accurate in ohm reads clouper slightly off not bad, provari on the money ohm reads as well also true evolv chip dual battery box also on the money ohm reads. This little istick is on the money with the vari and evolv chip so far impressed. Your other mods might be off these are all going to react with output per what ohm they are reading. To have to set your mod at a .5 difference is not bad at all.

 

[salemgold]

Not sure if this was posted in this thread eLeaf iStick ReviewSpinfuel eMagazine | Spinfuel eMagazine the reviewer tested and was impressed with the results.

Using my 2-in-1 Ohm and Voltage meter I picked up from MyVaporStore ($19.95) awhile back I ran some tests on the accuracy of the metering system in the iStick. Using a 1.6-ohm coil in the Nautilus Mini and a 1.8 ohm in the Aerotank the iStick read them exactly the same as the meter, which was enough to convince me that the electronics in the iStick were solid quality and accurate.

Me, too. I want to know if mine is defective or if others are the same. I don't know that its unsafe, just be careful about setting it where you normally would on other mods. I burned my lip on my drip tip and fried some juice in two attys.

I have experienced the same and so have most people that I have talked to that own one. Best bet is always to start low and move up from there with any new to you mod IMO

 

[Katdarling]

Lots of deja vu lately.

All over again?

Guess I'll just have to vape laying on my back in bed.

and

At the Price these iSticks are going for, I'm thinking of just Buying one of Each Color.

GREAT idea, zoiD! (yep, I did.)

 

[Wormycrm99]

Ordered from uvape/vapeNW ,off of ebay on Thursday. Got it in the mail today. That's real fast shipping from Washington to Alabama.


Sent from my iPhone using Tapatalk

 

[Wow1420]

I received a blue istick today from ebay seller very fast shipping. I have hanna clones not accurate in ohm reads clouper slightly off not bad, provari on the money ohm reads as well also true evolv chip dual battery box also on the money ohm reads. This little istick is on the money with the vari and evolv chip so far impressed. Your other mods might be off these are all going to react with output per what ohm they are reading. To have to set your mod at a .5 difference is not bad at all.

The resistance readings that I'm getting on the istick is right in line with MVP, itaste VV, vamo and a good DMM. I wasn't saying the .5 watt difference is a negative at all, just trying to throw out another data point in the power/accuracy discussion.