Eleaf Istick

[Night Hawk]

I thought this thread had reached a logical conclusion about 40 pages back

then some daft bugger releases the mini and it's groundhog day

"Logical conclusion? Spock did you hear that?!" "Illogical captain! There isn't any logic to find in this sector!"

 

[Katdarling]

"Logical conclusion? Spock did you hear that?!" "Illogical captain! There isn't any logic to find in this sector!"

You ok, Night Hawk?? A one line post??

 

[shack22]

Classy slideshow vid!


One thing mentioned in the review is that the battery indicator is digital-- I hope they do that on the 30 & 50w also. Not a fan of the battery icon on the 20w-- I find once it reaches halfway the second half goes faster than the first

 

[froginblender]

Got my 2nd istick after 1st one got the usb connection jammed up into the housing.

I would've bypassed getting a 2nd one...but will be another week till the Clapour mini 30w box comes out.
Will be ordering that next paycheck. That with Atlantis .05 coil, and hoping to cloud chase in theatre..(stealthily)....lmao.
But will have plenty of juice for it.

 

[TXBiker]

Wait till the istick 50w drops that'll open a new can of worms.

 

[Bigbob2322]

Anyone know the cost of the 50w.

 

[D91ICE]

Can you describe the flavours a bit for me? I will be using mini naughty on my isticks

Unicorn milk is like a strawberry and cream and tigers blood is like a fruit mix with a little coconut. There's a few by Zeus Juice that are great in the mini nautilus. Strawmelon Cooler, Selene's Seduction (fruit mix) and tigers blood are my personal favorites from Zeus juice. Unicorn milk is made by Cuttwood I believe.

 

[shack22]

Anyone know the cost of the 50w.

$50 @ originvape.com

"Stainless threading
Spring 510 connector
Low voltage protection
Reads resistance down to 0.2 ohms!
Up to 50 watts
Comes with non-native charging cord
Comes with non-native Ego adapter
Voltage range 2.0v – 10.0v
Wattage range 5W – 50W – accurate voltage and metering
4400mAh capacity battery

 

[Javamon]

...
... and hoping to cloud chase in theatre..(stealthily)....lmao.

Please splain. Do you blow clouds in movie theaters?

 

[Katdarling]

Classy slideshow vid!


One thing mentioned in the review is that the battery indicator is digital-- I hope they do that on the 30 & 50w also. Not a fan of the battery icon on the 20w-- I find once it reaches halfway the second half goes faster than the first

Nice find, shack.

So how many here already have the Mini?

Raiser yer paws.

$50 @ originvape.com

"Stainless threading
Spring 510 connector
Low voltage protection
Reads resistance down to 0.2 ohms!
Up to 50 watts
Comes with non-native charging cord
Comes with non-native Ego adapter
Voltage range 2.0v – 10.0v
Wattage range 5W – 50W – accurate voltage and metering
4400mAh capacity battery

A dollar a watt. Okie dokie.

 

[oplholik]

I thought this thread had reached a logical conclusion about 40 pages back

then some daft bugger releases the mini and it's groundhog day

Always seems to go that way, doesn't it.

 

[Fergie]

Price is subject to change, and additional information will be added as it becomes available!

 

[Stosh]

Wait till the istick 50w drops that'll open a new can of worms.

I'm confused, the most common complaint in this thread is the 20 watt iStick is too powerful, burns one's carto or clearo, and a 50 watt mod is going to be the answer....

The Eleaf sales dept told their engineering dept that the competition is releasing higher powered mods. They spent their time stoking the high end of the power range, the low power range on any 50-100 watt mod is suspect, and I would predict this to be no exception..

 

[ScandaLeX]

You ok, Night Hawk?? A one line post??

Like x million!!!!!!!!!!!!

 

[jefsview]

Eleaf has officially announced the new iStick 30W and 50W devices @ Eleafworld.com and via their Facebook pages.

No mention of what kind of output (Mean or RMS) of course. But they did confirm the Stainless Steel reinforced threads and spring-loaded 510 connections on both devices. The 30W still has the bottom USB charge port; the 50W has a side USB charge port. The 50W also has Temperature Protection, but no mention of the 30W button lock feature.

Looking good. Only time will tell about the board and the voltage delivery, but I have faith that they borrowed something from Joyetech to deliver perfection...

 

[Buster282]

FYI - VapeNW has the iStick 30W & 50W on preorder for $40 & $50 respectively. Looks like they fixed a lot of the issues. This thread will never stop!

 

[Zanzabar78]

Is your hinge on the bending adaptor extremely tight? Mine is very tight. I could hardly open it after I took it out of the package.

Its medium tightness i would say

 

[shack22]

Eleaf has officially announced the new iStick 30W and 50W devices @ Eleafworld.com and via their Facebook pages.

No mention of what kind of output (Mean or RMS) of course. But they did confirm the Stainless Steel reinforced threads and spring-loaded 510 connections on both devices. The 30W still has the bottom USB charge port; the 50W has a side USB charge port. The 50W also has Temperature Protection, but no mention of the 30W button lock feature.

Looking good. Only time will tell about the board and the voltage delivery, but I have faith that they borrowed something from Joyetech to deliver perfection...

Something tells me they've been lurking in this thread!

The button lock feature is listed on the 50w-- point 5.

 

[froginblender]

Please splain. Do you blow clouds in movie theaters?

lol of course not....that would get me busted....i blow the vapor down to my feet so's nobody's any the wiser.

 

[SS stingray]

Being left behind

I feel like the mod builders don't care about anything except pumping up the power !! I still use protank 2 and don't wish to change that. The coils are so easy to rebuild and very cheep to do. I'm happy with 20 W and only vape at low. In stead of fixing the problems with the Istick , Eleaf pumps out higher wattage. I don't want big clouds of smoke. That attitude will get ecigs banned in public. Is that what we want ? If Eleaf does read this than why come out with the same junk pins on the new mini ? I have a Cloupor Mini on order hoping it will be better than the Istick. It is 30 W which I would love to have only 20 W but it is what it is ? What's next ? A plug so you vape with 120 house currant ??